Search By Machine Type

PRICE REDUCED!! ONLY $7500 FOB TRUCK

Used 2006 Milltronics Partner VK2

2006 Milltronics Partner VK2 2 Axis CNC Knee Mill (4 Available)

Featured

Used 1997 Hoist FKE 6 - 12,000 lb. Electric Forklift

1997 Hoist FKE 6 - 12,000 lb. Electric Forklift and Charger

ON OUR FLOOR !! ONLY $10,900 LOADED !!

Used 2005 Milltronics RW20

2005 Milltronics RW20 3 Axis VMC with 16 Pos. Side Mount ATC, Centurion 7 Control, Boxed Ways, G Code & Conversational Programming

PRICE REDUCED!! ONLY $7500 FOB TRUCK

Used 2006 Milltronics Partner VK2

2006 Milltronics Partner VK2 2 Axis CNC Knee Mill (4 Available)

PRICE REDUCED!! ONLY $7500 FOB TRUCK

Used 2006 Milltronics Partner VK2

2006 Milltronics Partner VK2 2 Axis CNC Knee Mill (4 Available)

PRICE REDUCED!! ONLY $7500 FOB TRUCK

Used 2006 Milltronics Partner VK2

2006 Milltronics Partner VK2 2 Axis CNC Knee Mill (4 Available)

Heavy Duty Machine!!

Used 2005 Hyundai-Kia VX500 3 Axis Vertical Machining Center

2005 Hyundai Kia VX500 3 Axis Vertical Machining Center w/ Coolant Through the Spindle, 24 Station Side Mounted ATC

Duplicate of Hardinge HC, Excellent!!

Used 2006 Cyclematic CHR68 EVS Chucker Tool Room Lathe (Hardinge HC Type)

2006 Cyclematic CHR68 EVS Chucker Tool Room Lathe (Hardinge HC Type), Heidenhain DRO, 8 Station Turret

PRICE JUST REDUCED !!! JUST $99,500

Used 2006 Hankook Protec 9NC/4000 with 10" Bar Capacity, 160" Centers, (2) 25" Manual Chucks, Fanuc 21iTB Control

2006 Hankook Protec 9NC/4000 with 10" Bar Capacity, 160" Centers, (2) 25" Manual Chucks, Fanuc 21iTB Control

PRICE JUST REDUCED !!!!

Used 2007 Okuma Captain L470M/1250 Big Bore OSP P-200L with Milling Capability and 3.5" Bar Capacity, Chip Conveyor, Tool Eye

2007 Okuma Captain L470M/1250 Big Bore OSP P-200L with Milling Capability and 3.5" Bar Capacity, Chip Conveyor, Tool Eye

Featured

Used 2019 Haas VF-2SS with 4th Axis Drive & Wiring, Prepped for Coolant Through the Spindle, Chip Auger, PCool

2019 Haas VF-2SS with 4th Axis Drive & Wiring, Prepped for Coolant Through the Spindle, Chip Auger, PCool

CHECK OUT VIDEO!!

Used 2015 Okuma M560-V with 4th Axis Rotary Table, Renishaw Tool & Part Probing, 15k RPM, 32 Pos. ATC, Chip Claster HPC

2015 Okuma Genos M560-V with 4th Axis Rotary Table, Renishaw Tool & Part Probing, 15k RPM, 32 Pos. ATC, Chip Blaster HPC

Available Immediately !!

Used 2017 Haas ST-35 with Tailstock, Chip Conveyor, Parts Catcher, Toolsetter, 4" Bar Capacity, 31.75" sw, 26" cc, 40 HP, Geared Head

2017 Haas ST-35 with Tailstock, Chip Conveyor, Parts Catcher, Toolsetter, 4" Bar Capacity, 31.75" sw, 26" cc, 40 HP, Geared Head

Featured

Used 2013 C.R. Onsrud Model 122S18 CNC Router with 120" x 60" Table, 24,000 RPM, 18 HP, HSK63F Taper, 12 Station ATC, Very Clean!

2013 C.R. Onsrud Model 122S18 CNC Router with 120" x 60" Table, 24,000 RPM, 18 HP, HSK63F Taper, 12 Station ATC, Very Clean!

Featured

Used 2012 DMG-Mori NLX2500MC/700

2012 DMG-Mori NLX2500MC/700 with Milling Capability, C Axis Spindle, Chip Conveyor, Tailstock, Tool Presetter, 12" Chuck, 3.1" Bar Cap.

3 AVAILABLE !!

Used 2010 Mazak VTC800E/30-SR

2010 Mazak VTC800E/30-SR 5 Axis with Pendulum B Axis Head, 4th Axis Prep, 120" X Axis, 48 Pos. ATC, Chip Conv., Rotary Tbl Avail. at Add'l Cost

RARE FIND !!!

Used 2020 Doosan DVF 6500 5 Axis Trunnion VMC with 18,000 RPM, 60 ATC, Coolant Thru Spindle, Probing, Chip Conveyor

2020 Doosan DVF 6500 5 Axis Trunnion VMC with 18,000 RPM, 60 ATC, Coolant Thru Spindle, Probing, Chip Conveyor

Featured

Used 2005 Mazak Nexus VCN 510C Chip Conveyor, Remote Jog Handle, Misc Tooling

2005 Mazak Nexus VCN 510C Chip Conveyor, Remote Jog Handle, Misc Tooling

Used 1978 Do-All C-5A

1978 Do-All C-5A

Used 2010 Kitamura HX-1000i

2010 Kitamura HX-1000i

Used 1994 LNS Hydrobar Sprint 12' Magazine Barfeed

1994 LNS Hydrobar Sprint 12' Magazine Barfeed

Used 1991 LNS HYS 7.76 3.5

1991 LNS HYS 7.76 3.5

Used 1993 LNS HYS 7.76 3.3

1993 LNS HYS 7.76 3.3

Used 1997 LNS Hydrobar Mini-Sprint 12' Magazine Barfeed

1997 LNS Hydrobar Mini-Sprint 12' Magazine Barfeed

Used 1984 Mazak Megaturn A12 w/2 Pallets

1984 Mazak Megaturn A12 w/2 Pallets

Used 2003 Nakamura Tome WTS-150

2003 Nakamura Tome WTS-150

Used 2003 Okuma Ace Center MB-46VAE

2003 Okuma Ace Center MB-46VAE

Used 2007 Republic-Lagun RL-2775

2007 Republic-Lagun RL-2775

Used 1995 SMW Switcher 200S

1995 SMW Switcher 200S

Used 1956 Warner & Swasey 4A-M1500 with 9.25" Big Bore Spindle

1956 Warner & Swasey 4A-M1500 with 9.25" Big Bore Spindle

Used Wotan Rapid 0

Used 1998 Hyundai Hit-30F

1998 Hyundai Hit-30F

Used 1999 Saylor-Beall 25DR Screw Type Air Compressor

1999 Saylor-Beall 25DR Screw Type Air Compressor

Used Keyence XM-M1200 CMM

2021 Keyence XM-1200 CMM

Used 2018 Okuma Genos L300-MYW

2018 Okuma Genos L300-MYW-e X500 with Milling, Subspindle, Y Axis, Parts Catcher, Chip Conveyor, Barfeed Interface ONLY

Used 2019 Weiss Technik PVH120/70/6 Temperature/Humidity Test Chamber

2019 Weiss Technik PVH120/70/6 Temperature/Humidity Test Chamber

Used 1998 Okuma Crown Big Bore

1998 Okuma Crown Big Bore

Used Bulldozer Type 300 Ton Horizontal Hydraulic Press

Bulldozer Type 300 Ton Horizontal Hydraulic Press

Used 1992 Fadal VMC40

1992 Fadal VMC40

Used 2008 SNK HPS-120B

2008 SNK HPS-120B

Used 1998 Hitachi Seiki HiTec-Turn 40G

1998 Hitachi Seiki HiTec-Turn 40G

Used 2003 Mazak Variaxis 630-5X 2-PC

2003 Mazak Variaxis 630-5X 2-PC

Used 2007 Hyundai-Kia HS500i

2007 Hyundai Kia HS500i

Used 2016 Haas TM-2P

2016 Haas TM-2P with 4th Axis Drive, Programmable Coolant Nozzle, Rigid Tapping

Used 2013 Okuma LT3000EX-BB2MY

2013 Okuma LT3000EX-BB2MY

Used 2018 DMG DMU 100P duoBlock

2018 DMG Mori DMU 100P duoBlock

Used 2013 Haas DS-30 Big Bore w/ Milling

2013 Haas DS-30 Big Bore w/ Milling

Used 2007 Yama Seiki TS-150

2007 Yama Seiki TS-150

Used 2009 Doosan HM-1000

2009 Doosan HM-1000

Used 2021 Okuma LB3000EXII-MYW 800 w/OGL10 Gantry Loader

2021 Okuma LB3000EXII-MYW 800 w/OGL10 Gantry Loader

Used 2008 Makino E33

2008 Makino E33

Used 1998 Piranha P90 Ironworker

1998 Piranha P90 Ironworker

Used 2008 LNS Move S2 Short Load Barfeeder

2008 LNS Move S2 Autoload Type Barfeeder

Used 1995 Dahlih MCV-2100

1995 Dahlih MCV-2600 Heavy Duty 3 Axis Vertical Machining Center

Used FMB Turbo 3-26

2011 FMB Turbo 3-26

Used 1999 Fadal VMC6030HT

1999 Fadal VMC6030HT

Used 1993 Fadal VMC6030HT

1993 Fadal VMC6030HT

Used 2012 Okuma Genos L400-e

2012 Okuma Genos L400-e

Used 2019 DMG Mori NZX-2000/800STY3

2019 DMG Mori NZX-2000/800STY3 with Twin Spindles, 3 Turrets all with Milling & Y Axis Capability,

Used 2005 Milltronics RH15

2005 Milltronics RH15

Used 2014 Okuma MA-12500H

2014 Okuma MA-12500H

Used 1980 Hardinge TM

1980 Hardinge TM

Used 2005 Haas VF3B YT

2005 Haas VF3B YT

Used Acer AGS-618

2000 Acer AGS-618

Used 2012 Haas DT-1

Used 2005 Haas TM-1P

2005 Haas TM-1P

Used 2012 Haas TL-3

Used 1988 Toshiba BTD-11B Table Type HBM

1988 Toshiba BTD-11B-R3 Table Type HBM

Used 2004 Haas SL-30T

2004 Haas SL-30T

Used 2017 Flow Mach 2 3120B

2017 Flow Mach 2 3120B

Used 2011 Clausing VMC-1020SF

2011 Clausing VMC-1020SF

Used 2002 Vectrax GSN20V

2002 Vectrax GSN20V

Used 2009 Mazak SVC 2000L/200

2009 Mazak SVC 2000L/200-II High Speed VMC

Used Bridgeport Romi EZ Path

Bridgeport Romi EZ Path

Used 2014 Samsung SL-40/1500

2014 Samsung SL-40/1500 Heavy Duty CNC Lathe

Used 2006 Okuma & Howa Millac 852V w/ 4th Axis Rotary Table

2006 Okuma & Howa Millac 852V w/ 4th Axis Rotary Table

Used 2005 Toshiba BTD-110.R16 Tosnuc 888

2005 Toshiba BTD-110.R16 Tosnuc 888

Used 1993 Mazak SQT18MS w/ GL100 Gantry Loader

1993 Mazak SQT18MS w/ GL100 Gantry Loader

Used 2017 Yama Seiki GTW-1500Y Multi Axis Lathe

2017 Yama Seiki GTW-1500Y Multi Axis Lathe

Used 2016 Mazak Nexus HCN 4000-III

2016 Mazak Nexus HCN 4000-III

Used 2005 Millac 853PF-5X

2005 Okuma Millac 853PF-5X

Used 2005 Haas SL-30TB Big Bore

2005 Haas SL-30TB Big Bore 4" Bar Capacity

Used 2010 Okuma Impact LU45M-II / 3000

2010 Okuma Impact LU45-M 2SC/3000 with Dual Turrets, Live Milling Capability, Steady Rest

Used 1990 Kuraki KBT-11WDX CNC Table Type Horizontal Boring Mill

1990 Kuraki KBT-11WDX CNC Table Type Horizontal Boring Mill

Used 2018 Piranha C510 w/Tube Cutter

2018 Piranha C510 Plasma Table with Tube Cutter

Used 2000 Star SR-20

2000 Star SR-20

Used 2018 Samsung SMEC SLV 1000M

2018 Samsung SMEC SLV 1000M

Used 2005 Okuma MC-V4020

2005 Okuma MC-V4020

Used 2000 Okuma LB-45II-M/3000

2000 Okuma LB-45II-M/3000

Used 2015 DMG Mori NVL 1350MC

2015 DMG Mori NVL 1350MC

Used 2012 Allsteel 135-10 Press Brake

2000 Allsteel 135-10 Press Brake

Used 2007 Mori Seiki NL-2000/500

2007 Mori Seiki NL2000/500

Used 2007 Haas Super Mini Mill

2007 Haas Super Mini Mill

Used 2009 Mazak Nexus QTN 250-II

2009 Mazak Nexus QTN 250-II

Used 1984 Ultramatic Portaburr 5

1990 UltraMATIC Portaburr 5 Vibratory Tumbler

Used 2011 Weiler E80 x 3000

2011 Weiler E80 x 3000

Used 2007 Vanguard CAK80485D 2 Axis Long Bed Shaft Lathe

2007 Vanguard CAK80485D 2 Axis Long Bed Shaft Lathe

Used 2007 Haas TM-2

Used 2004 Haas TM-2

Used 1996 Mayfran Chip Conveyor for a Mazak HTC400

1996 Mayfran Chip Conveyor for a Mazak HTC400

Used 2019 Fadal VMC 4020B-II with Factory 2 Pallet Changer

2019 Fadal VMC 4020B-II with Factory 2 Pallet Changer

Used 1986 Nakamura Tome TMC-20 2 Axis Lathe

1986 Nakamura Tome TMC-20 2 Axis Lathe

Used 2020 Econoline 101701G-A 60"x48" Abrasive Blast Cabinet

2023 Econoline 101701G-A 60"x48" Abrasive Blast Cabinet

Used 2013 Haas ST-20SS 2 BIT

2013 Haas ST-20SS

Used 2007 Haas VF-3

2008 Haas VF-3B with Probing, 24 Station Side Mounted ATC, High Speed Machining, 4th Axis Drive

Used 2013 Mazak Nexus VCN 700E/40-II Large 3 Axis VMC

2013 Mazak Nexus VCN 700E/40-II Large 3 Axis VMC

Used 2008 Doosan Lynx 220LC

2008 Doosan Lynx 220LC

Used 2005 Nakamura Tome SC300 Fanuc 21iT

2005 Nakamura Tome SC300 w/ Fanuc 21iT Control, Chip Conveyor, 12" Hydraulic Chuck, 3.34" Spindle Bore

Refurbished 2005 Fadal VMC5020A HT

2005 Fadal VMC5020A HT

Used 2022 Kennametal Tooling

2022 Kennametal Tooling

Used 2012 Geka Hydracrop 110 AD

2012 Geka Hydracrop 110 AD Iron Worker

Used 2008 Hurco VM-3

2008 Hurco VM-3

Used 2006 Kingston CL-38x2000

2006 Kingston CL-38x2000 with 7.3" Bar Capacity, Steady Rest, Tailstock, Dual Turret Design

Used 2011 Mazak Nexus QTN 350-II/2000 CNC Lathe with 80" Center Distance

2011 Mazak Nexus QTN 350-II/2000 CNC Lathe with 80" Center Distance

Used 2021 Keyence XM-2000 Portable CMM

2021 Keyence XM-2000 Portable CMM

Used 2004 Mazak Nexus VCN-410B w/4th Axis

2004 Mazak Nexus VCN-410B w/4th Axis

Used 2009 Mazak Nexus VCN 510C-II with Tool Probe, Coolant Thru Spindle and Chip Conveyor

2009 Mazak Nexus VCN 510C-II with Tool Probe, Coolant Thru Spindle and Chip Conveyor

Used 2006 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, 15,000 RPM, Coolant Thru Spindle, High Speed Machining

2006 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, 15,000 RPM, Coolant Thru Spindle, High Speed Machining

Used 2005 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, Chip Auger, Programmable Coolant

2005 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, Chip Auger, Programmable Coolant

Used 2011 Mori Seiki NHX-5000 with 60 ATC, HP Coolant Thru Spindle, 1 Degree Indexing

2011 Mori Seiki NHX-5000 with 60 ATC, HP Coolant Thru Spindle, 1 Degree Indexing

Used 2005 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, Chip Auger, Programmable Coolant

2005 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, Chip Auger, Programmable Coolant

Used 2007 Haas VF3B with Haas HRT210 Rotary Table, Coolant Through Spindle, Probing Package

2007 Haas VF3B with Haas HRT210 Rotary Table, Coolant Through Spindle, Probing Package

Used 2019 Haas Haas Automatic Parts Loader

2019 Haas Automatic Parts Loader

Used 2006 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, Coolant Through Spindle, Chip Auger

2006 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, Coolant Through Spindle, Chip Auger

Used 2021 Haas VF-2SS with Robot Package

2021 Haas VF-2SS with Robot Package

Used 2006 Hyundai Kia SKT-400LC Long Bed Heavy Duty Lathe

2006 Hyundai Kia SKT-400LC Long Bed Heavy Duty Lathe

Used 2015 Haas VM-3 VMC, Probing, Coolant Through the Spindle, 4th Axis

2015 Haas VM-3 VMC, Probing, Coolant Through the Spindle, 4th Axis

Used 2005 Chevalier 618SP Super Precision Surface Grinder DRO

2005 Chevalier 618SP Super Precision Surface Grinder DRO

Used 2009 Haas TR2105XB 5th Axis Trunnion Rotary Table

2009 Haas TR2105XB 5th Axis Trunnion Rotary Table

Used 2006 Haas SL-20T with Tailstock, Tool Presetter, Chip Auger and 12 Station Hybrid Style Turret

2006 Haas SL-20T with Tailstock, Tool Presetter, Chip Auger and 12 Station Hybrid Style Turret

Used 2014 Haas ST-20Y with Y Axis, Live Milling, Parts Catcher, Chip Conveyor

2014 Haas ST-20Y with Y Axis, Live Milling, Parts Catcher, Chip Conveyor

Used 2020 Clausing Multi Turn CNC7000SC Lathe with 20" Chuck, 4" Bar Capacity

2020 Clausing Multi Turn CNC7000SC Lathe with 20" Chuck, 4" Bar Capacity

Used 2006 Doosan Puma MX2500ST 9 Axis Mill/Turn Center w/ Pendulum B Axis Head, Milling, Y Axis, Subspindle, Lower Turret

2006 Doosan Puma MX2500ST 9 Axis Mill/Turn Center w/ Pendulum B Axis Head, Milling, Y Axis, Subspindle, Lower Turret

Used 2008 Mazak FH-10800 2 Pallet HMC, 120 ATC, 1 Deg Indexing, Tool & Work Probing

2008 Mazak FH-10800 2 Pallet HMC, 120 ATC, 1 Deg Indexing, Tool & Work Probing

Used 2009 Haas TM-1, wired for 4th Axis, Single or Three Phase Power

2009 Haas TM-1, Wired for 4th Axis, Single or Three Phase Power, 10 Station ATC, Coolant Pump

Used 2012 Haas TL-2 with Tailstock, 10" 3 Jaw Chuck, Tool Post, Chuck Guard, Manual Hand Wheels

2012 Haas TL-2 with 3" Big Bore Option, Tailstock, 10" 3 Jaw Chuck, Tool Post, Chuck Guard, Manual Hand Wheels

Used 2022 BLM Group Model LS5 12 KW Fiber Laser

2022 BLM Group Model LS5 12 KW Fiber Laser

Used 2017 Doosan HC400-II

2017 Doosan HC400-II

Used 2018 Doosan HC400-II w/ 2 Pallet Changer, Full 4th Axis Rotary Table, 60 ATC, Coolant Through the Spindle, Probing

2018 Doosan HC400-II w/ 2 Pallet Changer, Full 4th Axis Rotary Table, 60 ATC, Coolant Through the Spindle, Probing

Used 2014 Trumpf Trubend 5230 CNC Press Brake w/ 6 Axis Back Gauge, Upper & Lower Clamping, CNC Prog Crowning, Extended Height

2014 Trumpf Trubend 5230 253 Ton CNC Press Brake w/ 6 Axis Back Gauge, Upper & Lower Clamping, CNC Prog Crowning, Ext. Height

Used 2015 Doosan Puma GT-2100B

2015 Doosan Puma GT-2100B Big Bore w/ 3.2" Bar Capacity, Chip Conveyor, Parts Catcher, Tailstock, Tool Presetter, 10" Chuck

Used 2016 Mazak VCU-500C with Mazak 4th Axis Rotary Table, Coolant Thru Spindle, Probing

2016 Mazak VCU-500C with Mazak 4th Axis Rotary Table, Coolant Thru Spindle, Probing

Used 2010 Matsuura LX-0 5AX 5 Axis CNC High Speed VMC with 43,000 RPM, 30 Station ATC, BT 30 Spindle Taper, 3546 IPM RAPIDS !!

2010 Matsuura LX-0 5AX 5 Axis CNC High Speed VMC with 43,000 RPM, 30 Station ATC, BT 30 Spindle Taper, 3546 IPM RAPIDS !!

Used 2018 Hyundai Wia HD2200 with Chip Conveyor, Parts Catcher, Tailstock, Fanuc, Tool Presetter, 22" Machining Length !!!

2018 Hyundai Wia HD2200 with Chip Conveyor, Parts Catcher, Tailstock, Fanuc, Tool Presetter, 22" Machining Length !!!

Used 2007 Haas VF5/50 XT with 4th Axis Drive, Tool Probing, 10,000 rpm, 50 Taper with Extended X Axis Travel

2007 Haas VF5/50 XT with 4th Axis Drive, Tool Probing, 10,000 rpm, 50 Taper with Extended X Axis Travel

Used 2007 Doosan DMV 3016Ld

2007 Doosan DMV 3016Ld

Used 2013 DMG Mori NHX-4000

2013 DMG Mori NHX-4000 with 1 Degree Pallet Indexing, 60 Station Tool Changer, Coolant Through the Spindle

Used 2005 Haas SL-30T

2005 Haas SL-30T

Used 2022 Okuma M560-V with 4th Axis Rotary Table, Coolant Through Spindle, Probe, Chip Conveyor

2022 Okuma Genos M560-V with 4th Axis Rotary Table, Coolant Through Spindle, Probe, Chip Conveyor

Used 2005 Okuma LH-55N/3000 with 12.99" Spindle Bore, Dual 24" Chucks, Chip Conveyor, Tailstock, Dual Turret Design

2005 Okuma LH-55N/3000 with 12.99" Spindle Bore, Dual 24" Chucks, Chip Conveyor, Tailstock, Dual Turret Design

Used 2017 OKK HMC-500 Full 4th Axis

2017 OKK HMC-500 with Full 4th Axis Table, 60 ATC, High Press. Cool. Thru Spindle, Tool & Part Probing, 15,000 RPM, CAT 40 Big Plus

Used 2000 Hardinge ST-216-B

2000 Hardinge ST-216-B Twin Spindle

Used 2012 Makino A51NX with Full 4th Axis, 14k RPM, Coolant Thru Spindle, 60 ATC, Chip Conveyor

2012 Makino A51NX with Full 4th Axis, 14k RPM, Coolant Thru Spindle, 60 ATC, Chip Conveyor

Used 2004 Mazak Nexus QTN 200 MY with Milling, Y Axis, Chip Conveyor, Tailstock, Tool Presetter, 8" Chuck, 2" Bar Capacity

2004 Mazak Nexus QTN 200 MY with Milling, Y Axis, Chip Conveyor, Tailstock, Tool Presetter, 8" Chuck, 2" Bar Capacity

Used 2000 Fadal VMC 15

2000 Fadal VMC 15

Used 2001 Mori Seiki ZT2500Y

2001 Mori Seiki ZT2500Y

Used 2010 Haas EC-2000-4X with Built In 4th Axis Table, Hi Press. Coolant Thru Spindle, Probing, 6000 RPM, 30 HP Gearbox

2010 Haas EC-2000-4X with Built In 4th Axis Table, Hi Press. Coolant Thru Spindle, Probing, 6000 RPM, 30 HP Gearbox

Used 1997 Mazak QT10 with 6" Hyd Chuck, Tool Presetter, Tailstock, Chip Conveyor, Parts Catcher, 12 Station Turret, Tplus Control

1997 Mazak QT10 with 6" Hyd Chuck, Tool Presetter, Tailstock, Chip Conveyor, Parts Catcher, 12 Station Turret, Tplus Control

Used 2016 Okuma LB3000EXII-MYW 800 with Milling, Y Axis, Subspindle, OSP-P300LA Control

2016 Okuma LB3000EXII-MYW 800 with Milling, Y Axis, Subspindle, OSP-P300LA Control

Used 2010 Haas ST-30M

2010 Haas ST-30M with Milling, Servo Bar 300 Barfeed, Parts Catcher, Chip Conveyor, Tailstock

Used 2019 Haas GM-2-5AX with Nutating Head, Probing, Hi-Speed Machining, Chip Auger, 20,000 RPM, REBUILT TO NEW SPECS

2019 Haas GM-2-5AX with Nutating Head, Probing, Hi-Speed Machining, Chip Auger, 20,000 RPM, REBUILT TO NEW SPECS

Used 2006 OKK HPS-500S

2006 OKK HPS-500S

Used 2006 OKK HPS-500S

2005 OKK HPS-500S

Used 2014 Haas VF-12/50 with 30 Pos. Side Mounted ATC, Wired for 4th Axis, High Pressure Coolant Thru Spindle

2014 Haas VF-12/50 with 30 Pos. Side Mounted ATC, Wired for 4th Axis, High Pressure Coolant Thru Spindle

Used 2001 Kingston CHK-3000 w/12.5" Bore

2001 Kingston CHK-3000 w/12.5" Bore

Used 2023 Haas TM-0P

2023 Haas TM-0P with Full Enclosure, LOW Hours, *This Machine Does Not Have a Tool Changer*

Used 2023 Haas ST-10 Chucker with Chip Conveyor, Tool Presetter, 6.5" Hyd Chuck, Under 200 Cut Hours

2023 Haas ST-10 Chucker with Chip Conveyor, Tool Presetter, 6.5" Hyd Chuck, Under 200 Cut Hours

Used 2003 Haas VF-2SS

2003 Haas VF-2SS with Chip Auger, Programmable Coolant, Quick Code, Floppy Drive, 24 Station Side Mount ATC, BT40

Used 2021 Haas GR-510 w/ 10 ATC, 8100 RPM, CAT 40, Aluminum Table, Probing

2021 Haas GR-510 w/ Probing, 10 Position ATC, 8100 RPM, CAT 40, Aluminum Table

Used 2022 Haas EC-1600ZT-5AX with Ext. Z travel, 4th Axis Table, 50 ATC, CAT 50, TSC, Renishaw Probing, ONLY 140 FEED CUT HOURS

2022 Haas EC-1600ZT-5AX with Ext. Z travel, 4th Axis Table, 50 ATC, CAT 50, TSC, Renishaw Probing, ONLY 140 FEED CUT HOURS

Used 1982 Hitachi Seiki 7NF-1100

1984 Hitachi Seiki 7NF-1100 w/ 21" 3 Jaw SMW Air Chuck w/ 8" Hole Thru Chuck, 10" Spindle Bore, Fanuc FAPT Conversational

Used 1985 Hitachi Seiki 7NF-1100 22.5" Air Chuck 10" Bore

1985 Hitachi Seiki 7NF-1100 w/ (2) 24" 4 Jaw Manual Chks. with 12" Hole, 10" Spindle Bore & Bar Cap., Tailstock, Fanuc 6TB Control

Used 1980 Clausing 15"x50" Engine Lathe

1980 Clausing 15"x50" Engine Lathe

Used 2013 Samsung SL-20/500 with Chip Conveyor, Parts Catcher, Tool Presetter, Tailstock, Fanuc 0i-TD Control

2013 Samsung SL-20/500 with Chip Conveyor, Parts Catcher, Tool Presetter, Tailstock, Fanuc 0i-TD Control

Used 1996 Haas VF-2B with Haas HRT-210 4th Axis Rotary Table, Newer Spindle, Newer LCD Monitor and Lube System

1996 Haas VF-2B with Haas HRT-210 4th Axis Rotary Table, Newer Spindle, Newer LCD Monitor and Lube System

Used 1997 Wasino LG-7 CNC Gang Style Lathe with Auto Loader

1997 Wasino LG-7 CNC Gang Style Lathe with Auto Loader

Used 2006 Haas TM-1 w/ 4th Axis Drive, Coolant Syst., Single or Three Phase from Tech School

2006 Haas TM-1 w/ 4th Axis Drive, Coolant Syst., Single or Three Phase from Tech School

Used 2012 Haas VF-7/50 with Coolant Thru Spindle, Probing, CAT 50 Tpr, 4th Axis Drive, 7500 RPM

2012 Haas VF-7/50 with Coolant Thru Spindle, Probing, CAT 50 Tpr, 4th Axis Drive, 7500 RPM

Used 2001 Daewoo Puma 250B with 12" Hyd. Chuck, Chip Conveyor, Tool Presetter, Tailstock, ONLY 7848 Cutting Hours

1997 Daewoo Puma 250B with 12" Hyd. Chuck, Chip Conveyor, Tool Presetter, Tailstock, ONLY 7848 Cutting Hours

Used 2014 DMG Mori NTX2000-1500SZM Mill/Turn Center, Pendulum B Axis, Y Axis, Lower Turret Milling, 8" Chucks Both Spindles

2014 DMG Mori NTX2000-1500SZM Mill/Turn Center, Pendulum B Axis, Y Axis, Lower Turret Milling, 8" Chucks Both Spindles

Used 2003 Haas SL-30TB 4" Bar Capacity, Chip Conveyor, Tool Presetter

2003 Haas SL-30TB 4" Bar Capacity, Chip Conveyor, Tool Presetter

Used 2013 Haas VF-4SS w/ 4th Axis Drive, 24 Station Side Mounted ATC, Programmable Coolant, Multi Auger Conveyor, 12,000 RPM

2013 Haas VF-4SS w/ 4th Axis Drive, 24 Station Side Mounted ATC, Programmable Coolant, Multi Auger Conveyor, 12,000 RPM

Used 1994 Mazak QT35N/1000

1994 Mazak QT35N/1000

Used 1998 Mazak QT40/1500

1998 Mazak QT40/1500 6.5" Bore

Used 2004 Doosan Puma 240LB

2004 Doosan Puma 240LB

Used 2014 Haas Super Mini Mill 2

2014 Haas Super Mini Mill 2 with Haas Probing, Chip Auger, Progr. Coolant, 4th Axis Drive, Wired 3 Phase Power

Used 2022 Haas TM-0P, 4th & 5th Axis Drives, WIPS Renishaw Part & Tool Probe, High-Speed Machining, Dynamic Work Offsets, Rigid Tapping, High-Flow Coolant Pump, Programmable Coolant Nozzle, Single or Three Phase

2022 Haas TM-0P, 4th & 5th Axis Drives, WIPS Renishaw Part & Tool Probe, High-Speed Machining, Dynamic Work Offsets, Rigid Tapping, High-Flow Coolant Pump, Programmable Coolant Nozzle, Single or Three Phase

Used 2014 Haas TM-2P with Haas Probing Package, 6,000 RPM, Chip Auger, USB Port, 1841 Spindle Hours

2014 Haas TM-2P with Haas Probing Package, 6,000 RPM, Chip Auger, USB Port, 1841 Spindle Hours

Used 2021 Hwacheon Hi-Tech 230BL YSMC w/ Milling, Y Axis, Subspindle, Chip Conv., Parts Catcher, 10" Chk 3.19" Bar Capacity

2021 Hwacheon Hi-Tech 230BL YSMC w/ Milling, Y Axis, Subspindle, Chip Conv., Parts Catcher, 10" Chk 3.19" Bar Capacity

Used 2006 Haas SL-20TAPL

2006 Haas SL-20TAPL, Auto Parts Loader, 5k rpm Spindle Option, Remote Jog Handle, Chip Auger

Used 2019 Haas TM-2P with Haas Probing Package, 4th Axis Drive & Wiring, Rigid Tapping, Low Hours

2019 Haas TM-2P with Haas Probing Package, 4th Axis Drive & Wiring, Rigid Tapping, Low Hours

Used 2006 Mazak Nexus VCN 510C with Nikken 4th Axis, Coolant Thru Spindle, Tool Probing, Chip Conveyor

2006 Mazak Nexus VCN 510C with Nikken 4th Axis, Coolant Thru Spindle, Tool Probing, Chip Conveyor

Used 2006 Romi M33 x 80" Oilfield Type Hollow Spindle Lathe with 10.5" Bore, Steady Rest, Chip Conveyor, Tailstock

2006 Romi M33 x 80" Oilfield Type Hollow Spindle Lathe with 10.5" Bore, Steady Rest, Chip Conveyor, Tailstock

Used 2014 Haas VF8/40 with Haas Probing Package (needs probe repaired), 24 Station Side Mount ATC, 8100 RPM, CAT 40

2014 Haas VF8/40 with Haas Probing Package (needs probe repaired), 24 Station Side Mount ATC, 8100 RPM, CAT 40

Used 1999 Mazak VTC-30C with (2) Tool Probes, Chip Conveyor, Dual Tool Changers

1999 Mazak VTC-30C with (2) Tool Probes, Chip Conveyor, Dual Tool Changers

Used 2013 Haas VF2 with Probing, 4th Axis Drive, Chip Auger, 20 Station Carousel Style ATC

2013 Haas VF2 with Probing, 4th Axis Drive, Chip Auger, 20 Station Carousel Style ATC

Used 2014 Mazak Quick Turn Smart 100S

2014 Mazak Quick Turn Smart 100S

Used 2004 Mazak Nexus QTN-100-II

2006 Mazak Nexus QTN-100-II, Parts Catcher, Chip Conveyor, Tool Eye

Used 2003 Romi M-170

Used 2011 Mazak Quick Turn Smart 100S

2011 Mazak Quick Turn Smart 100S

Used 2023 Haas ST-20Y with Haas Barfeed, Milling, Y Axis, Chip Conveyor, Tailstock, Low Hours

2023 Haas ST-20Y with Haas Barfeed, Milling, Y Axis, Chip Conveyor, Tailstock, Low Hours

Used 2007 Haas SL-20T with Tailstock, Tool Presetter, High Pressure Pump, Chip Conveyor, New Spindle !!

2007 Haas SL-20T with Tailstock, Tool Presetter, High Pressure Pump, Chip Conveyor, New Spindle !!

Used 2005 Haas EC-3000 3 Axis Horizontal Machining Center with Coolant Thru Spindle, 30 ATC, Geared Head, 6000 RPM, CAT 50

2005 Haas EC-3000 3 Axis Horizontal Machining Center with Coolant Thru Spindle, 30 ATC, Geared Head, 6000 RPM, CAT 50

Used 2012 Haas TM-1P

2012 Haas TM-1P

Used 2015 Milltronics ML16/40

2015 Milltronics ML16/40 8-Station Turret

Used 2012 Mori Seiki NHX4000 with Full 4th Axis Rotary Tbl. 1000 PSI CTS, Tool Probing, 60 Station Tool Changer

2012 Mori Seiki NHX4000 with Full 4th Axis Rotary Tbl. 1000 PSI CTS, Tool Probing, 60 Station Tool Changer

Used 2005 Haas VF-3YT/40 Coolant Thru the Spindle, Remote Jog Handle, 24 atc Side Mount Tool Changer, 4th Axis Pre-Wired 2-Speed Gear Box

2005 Haas VF-3YT/40 Coolant Thru the Spindle, Remote Jog Handle, 24 atc Side Mount Tool Changer, 4th Axis Pre-Wired 2-Speed Gear Box

Used 1998 Mazak VTC16B with Yuasa Indexer, Chip Conveyor, Auto Tool Length Measurement Probe, Making Parts

1998 Mazak VTC16B with Yuasa Indexer, Chip Conveyor, Auto Tool Length Measurement Probe, Making Parts

Used 2008 Mazak Variaxis 500-5X II with Pallet Changer, Trunnion Style 5 Axis Design, HSK-63A Taper, 25,000 RPM, 120 ATC, CTS

2008 Mazak Variaxis 500-5X II with Pallet Changer, Trunnion Style 5 Axis Design, HSK-63A Taper, 25,000 RPM, 120 ATC, CTS

Used 2020 DMTC CGK5112JD 2 Axis CNC VTL with 8 Station ATC, 40" 4 Jaw Manual Chk, Fanuc 0i-TF Plus Control, 47.2" Swing

2020 DMTC CGK5112JD 2 Axis CNC VTL with 8 Station ATC, 40" 4 Jaw Manual Chk, Fanuc 0i-TF Plus Control, 47.2" Swing

Used 2010 Haas TR-160 Trunnion Table

2005 Haas TR-160 4th/5th Axis Brushless Trunnion Table

Used 2022 Haas UMC-500SS

2022 Haas UMC-500SS Remote Jog Handle, Coolant Thru the Spindle, WIPS Renishaw Part & Tool Probe, Chip Conveyor

Used 1990 HEM H75A

Used 2000 Mazak Integrex 300SY

2000 Mazak Integrex 300SY with C Axis/Milling, Y Axis, Subspindle, 3" Bar Capacity, 40" Centers, Chip Conveyor, Toolsetter

Used 2004 Mazak Nexus VCN 510C

2004 Mazak Nexus VCN 510C with 4th Axis Rotary Table, Remote Jog Handle, 30 Station Side Mounted ATC

Used 2012 Mazak Integrex i-500V 5 Axis with 2 Pallet Changer, 80 Station ATC, HPC 1000 PSI, Full 4th Rotary, Probing

2012 Mazak Integrex i-500V 5 Axis with 2 Pallet Changer, 80 Station ATC, HPC 1000 PSI, Full 4th Rotary, Probing

Used 2014 Doosan Puma 400LC with 21" Hyd Chuck, 7.1" Bore w/ 6.5" Bar Capacity, Programmable Tailstock, Chip Conveyor, Toolsetter

2014 Doosan Puma 400LC with 21" Hyd Chuck, 7.1" Bore w/ 6.5" Bar Capacity, Programmable Tailstock, Chip Conveyor, Toolsetter

Used 2021 Haas VF-4 with 4th Axis Drive, Programmable Cool. Nozzle, 20 Station Umbrella Style ATC, USB Port, 1,127 Feed Cut Hours !!

2021 Haas VF-4 with 4th Axis Drive, Programmable Cool. Nozzle, 20 Station Umbrella Style ATC, USB Port, 1,127 Feed Cut Hours !!

Used 2004 Haas VF4SS with Haas HRT-A6 4th Axis Rotary Table, Coolant Thru Spindle, PCool, Auger and more

2004 Haas VF4SS with Haas HRT-A6 4th Axis Rotary Table, Coolant Thru Spindle, PCool, Auger and more

Used 2009 You Ji VTL 1000ATC

2009 You Ji VTL 1000ATC

Used 1996 Fadal VMC 15

1996 Fadal VMC 15

Used LNS Quick Load Servo S3 Barfeeder

2004 LNS Quick Load Servo S3 Barfeeder

Used 2015 Haas VF1 with 10,000 RPM, 24 Station Side Mounted ATC, Chip Auger, Extended Memory, Remote Jog Handle

2015 Haas VF1 with 10,000 RPM, 24 Station Side Mounted ATC, Chip Auger, Extended Memory, Remote Jog Handle

Used 2008 Milltronics ML40/80 14" Big Bore

2008 Milltronics ML40/80 with 14" Big Bore Spindle, 36" 4 Jaw Manual Chuck, Tailstock, Tool Post, Chip Conveyor

Used 2022 Haas ST-25 Chucker w/ Haas Barfeed with Liners, Tool Presetter, Chip Conveyor, 10" Hydraulic Chuck, Parts Catcher

2021 Haas ST-25 Chucker w/ Haas Barfeed with Liners, Tool Presetter, Chip Conveyor, 10" Hydraulic Chuck, Parts Catcher

Used 2013 Haas ST-30 with Haas Barfeed, Tailstock, Tool Presetter, Chip Conveyor, High Pressure Coolant

2013 Haas ST-30 with Haas Barfeed, Tailstock, Tool Presetter, Chip Conveyor, High Pressure Coolant

Used 1987 Mazak YMS H40Q with 2 Plt. Changer, Full 4th Rotary Tbl, 40 Pos. ATC, 5.1" Spindle Diam, Right Angle Head, 5 Face Machining

1987 Mazak YMS H40Q with 2 Plt. Changer, Full 4th Rotary Tbl, 40 Pos. ATC, 5.1" Spindle Diam, Right Angle Head, 5 Face Machining

Used 2015 Mazak Quick Turn Universal 250, 8" Hyd Chuck, 2" Bar Capacity, Chip Conveyor, Tool Eye, Tailstock, Hi Pressure Coolant

2015 Mazak Quick Turn Universal 250, 8" Hyd Chuck, 2" Bar Capacity, Chip Conveyor, Tool Eye, Tailstock, Hi Pressure Coolant

Used 2018 Mazak VC-500A-5X with 5 Axis Machining, 2 Pallet Changer, 60 Pos. ATC, Coolant Thru Spindle, Tool & Part Probing

2018 Mazak VC-500A-5X with 5 Axis Machining, 2 Pallet Changer, 60 Pos. ATC, Coolant Thru Spindle, Tool & Part Probing

Used 2014 Haas VF-9/40 with T

2014 Haas VF-9/40 with Haas TR-310 Trunnion Table, Coolant Through Spindle, Extended Z Clearance, High Speed Machining

Used 1996 Saeilo Mach 3A HMC with 2 Pallet Changer, 1 Degree Index, 10,000 RPM, 20 Station ATC, CAT40, Chip Conveyor, R/T

1996 Saeilo Mach 3A HMC with 2 Pallet Changer, 1 Degree Index, 10,000 RPM, 20 Station ATC, CAT40, Chip Conveyor, R/T

Used 2012 Victor Taichung VTurn 46 Heavy Duty CNC Lathe with 32" sw, 69" cc, 4.52" Bar Capacity, 68 HP, 15" Chuck, 4 Spd Gearbox

2012 Victor Taichung VTurn 46 Heavy Duty CNC Lathe with 32" sw, 69" cc, 4.52" Bar Capacity, 68 HP, 15" Chuck, 4 Spd Gearbox

Used 2012 Victor Taichung VTurn 46 Heavy Duty CNC Lathe with 32" sw, 69" cc, 4.52" Bar Capacity, 68 HP, 15" Chuck, 4 Spd Gearbox

2012 Victor Taichung VTurn 46 Heavy Duty CNC Lathe with 32" sw, 69" cc, 4.52" Bar Capacity, 68 HP, 15" Chuck, 4 Spd Gearbox

Used 2007 Mazak Variaxis 500-5X II with 5 Axis Trunnion Table, 40 Pos. ATC, HSK63 Taper, 12,000 RPM, HP CTS, Renishaw OMP Probe

2007 Mazak Variaxis 500-5X II with 5 Axis Trunnion Table, 40 Pos. ATC, HSK63 Taper, 12,000 RPM, HP CTS, Renishaw OMP Probe

Used 2015 Haas TM-3P, with Probing, 4th Axis Drive, Rigid Tapping, Upgraded High Flow Coolant Pump, 20 Station ATC

2015 Haas TM-3P, with Probing, 4th Axis Drive, Rigid Tapping, Upgraded High Flow Coolant Pump, 20 Station ATC

Used 2015 Haas ST-30

2015 Haas ST-30 Chucker with Haas Servo Bar 300 Barfeed, Chip Conveyor, Parts Catcher, 10" Chuck, 3" Bar Capacity

Used 2006 Haas TL-3 with Tailstock, 12" Chuck, Fully Enclosure, Coolant Tank/Pump, Just 4741 Spindle Hours !!

2006 Haas TL-3 with Tailstock, 12" Chuck, Fully Enclosure, Coolant Tank/Pump, Just 4741 Spindle Hours !!

Used 2007 Haas VF-2B

2007 Haas VF-2B

Used 2011 Haas ST-30M Chucker with Haas Barfeed, Chip Conveyor, Parts Catcher, Live Tooling, 3" Bar Cap., 10" Chuck, (5) Live Holders

2011 Haas ST-30M Chucker with Haas Barfeed, Chip Conveyor, Parts Catcher, Live Tooling, 3" Bar Cap., 10" Chuck, (5) Live Holders

Used 2010 Milltronics ML40/160 with 14" Big Bore Spindle, 31.5" 3 Jaw Manual Chuck, Tailstock, 12 Station Turret, (2) Steady Rests

2010 Milltronics ML40/160 with 14" Big Bore Spindle, 31.5" 3 Jaw Manual Chuck, Tailstock, 12 Station Turret, (2) Steady Rests

Used 2006 Mazak Nexus QTN 250 MSY with Live Milling, Subspindle, Y Axis, Barfeed, Parts Catcher, Chip Conveyor, Hydraulic Chucks

2006 Mazak Nexus QTN 250 MSY with Live Milling, Subspindle, Y Axis, Barfeed, Parts Catcher, Chip Conveyor, Hydraulic Chucks

Used 2005 Haas TL-3

Used 2002 Mazak Integrex 300-IIY/1000

2002 Mazak Integrex 300-IIY/1000

Used 2012 Mazak Nexus QTN 450-II/1000 with 6.5" Bar Capacity, Chip Conveyor, Tailstock, Toolsetter, 40" centers, 50 HP

2012 Mazak Nexus QTN 450-II/1000 with 6.5" Bar Capacity, Chip Conveyor, Tailstock, Toolsetter, 40" centers, 50 HP

Used 2015 Ganesh GT-3080CNC BB with 10" Spindle Bore

2015 Ganesh GT-3080CNC BB with 10" Spindle Bore

Used 2011 Haas ST-20

2011 Haas ST-20 with Tailstock, 8" 3 Jaw Chk, Tool Presetter, Chip Conveyor

Used 2010 Mitutoyo Bright BRT-1230 CMM with Renishaw PH20 Probe, Raven MCE Software Package, Stylus Kit

2010 Mitutoyo Bright BRT-1230 CMM with Renishaw PH20 Probe, Raven MCE Software Package, Stylus Kit

Used Haas HRT310 Brushless Type with 2 Multi Pin Cable Connections, Chuck Included

Haas HRT310 Brushless Type with 2 Multi Pin Cable Connections, Chuck Included

Used 2016 Haas UMC-750SS with Midaco 19 Pallet Changer System, Coolant Through Spindle, 15,000 RPM, Probing, 40 Position ATC

2016 Haas UMC-750SS with Midaco 19 Pallet Changer System, Coolant Through Spindle, 15,000 RPM, Probing, 30 Position ATC

Used 2002 Fadal VMC6535-50 32MP Control, Rigid Tapping, Cool Power, Remote Jog Handle, Chip Conveyor, Expanded Memory

2002 Fadal VMC6535-50 32MP Control, Rigid Tapping, Cool Power, Remote Jog Handle, Chip Conveyor, Expanded Memory

Used 2005 Mazak Nexus QTN 300/1200 with Chip Conv., 3" Bar Cap., 10" Chk, Tailstock, Tool Presetter, Fusion 640T Nexus Control

2005 Mazak Nexus QTN 300/1200 with Chip Conv., 3" Bar Cap., 10" Chk, Tailstock, Tool Presetter, Fusion 640T Nexus Control

Used 2007 Milltronics VMD-30/100 Series C

2007 Milltronics VMD-30

Used 2004 Birmingham BPV-3949 9"x49" Travel Knee Mill

2004 Birmingham BPV-3949 9"x49" Knee Mill

Used 1999 Hwacheon Mega 95/5000

1999 Hwacheon Mega 95/5000 with 9" Bar Capacity, 197" cc, Tool Post, 25" Manual Chuck, Tailstock

Used 2006 Leadwell LTC50-BL with 18" Hyd Chk, 4.6" Bar Cap., 33.5" sw, 80" cc, 1500 RPM, 50 HP, Steady Rest, Conveyor, Fanuc 0i-TC

2006 Leadwell LTC50-BL with 18" Hyd Chk, 4.6" Bar Cap., 33.5" sw, 80" cc, 1500 RPM, 50 HP, Steady Rest, Conveyor, Fanuc 0i-TC

Used 2012 YCM DCV 4025B Bridge Mill with Coolant Through the Spindle, 160"x98"x40", 120 ATC, Conveyor, Hi Spd Machining

2012 YCM DCV 4025B Bridge Mill with Coolant Through the Spindle, 160"x98"x40", 120 ATC, Conveyor, Hi Spd Machining

Used 2006 Haas VF2SS with 4th Axis Drive ONLY, Remote Jog Handle, Chip Auger, Programmable Coolant Nozzle

2006 Haas VF2SS with 4th Axis Drive ONLY, Remote Jog Handle, Chip Auger, Programmable Coolant Nozzle

Used 2013 Haas ST-10

2013 Haas ST-10 Chucker with Live Milling Capability, Barfeed, Parts Catcher, Chip Conveyor

Used 2007 Haas VF2SS with Probing, Chip Auger, Progr. Coolant Nozzle, 24 Station SMATC, Jog Handle, Stevens Fixture Plate

2007 Haas VF2SS with Probing, Chip Auger, Progr. Coolant Nozzle, 24 Station SMATC, Jog Handle, Stevens Fixture Plate

Used 2022 Doosan Puma GT-2600M with C Axis, Milling/Drilling, Collet Chuck, FMB Turbo Barfeeder, Tailstock, Chip Conveyor, Tool Eye

2022 Doosan Puma GT-2600M with C Axis, Milling/Drilling, Collet Chuck, FMB Turbo Barfeeder, Tailstock, Chip Conveyor, Tool Eye

Used 2017 Okuma MB-4000H with 6 Station Rotary Pallet Changer, Full 4th Axis Rotary Tbl, 15k RPM, HSK63 Tpr., HPC, Probing, 64 Pos ATC

2017 Okuma MB-4000H with 6 Station Rotary Pallet Changer, Full 4th Axis Rotary Tbl, 15k RPM, HSK63 Tpr., HPC, Probing, 64 Pos ATC

Used 2021 Haas VF2SS with Coolant Thru Spindle, Haas Probing Package, 30 Station ATC, HSM, 12,000 RPM

2021 Haas VF2SS with Coolant Thru Spindle, Haas Probing Package, 30 Station ATC, HSM, 12,000 RPM

Used 2024 Haas ST-15 with Tailstock, Tool Presetter, Chip Conveyor, 8.3" Hyd Chuck, Parts Catcher, 2.5" Bar Capacity

2024 Haas ST-15 with Tailstock, Tool Presetter, Chip Conveyor, 8.3" Hyd Chuck, Parts Catcher, 2.5" Bar Capacity

Used 2019 Doosan Puma TT1300SY Twin Spindle/Twin Turret, Y Axis Mill Turn Lathe, Barfeed, Parts Conveyor,

2019 Doosan Puma TT1300SY Twin Spindle/Twin Turret, Y Axis, Mill Turn Lathe, Barfeed, Parts Conveyor, Collet Chks, 1.81" Bar Cap.

Used 2016 Haas ST-30SSY with Live Milling/Drilling Cap, C Axis, Y Axis, Barfeed, Parts Catch, Chip Conv., Tailstock, C Axis, Tool Setter

2016 Haas ST-30SSY with Live Milling/Drilling Cap, C Axis, Y Axis, Barfeed, Parts Catch, Chip Conv., Tailstock, C Axis, Tool Setter

Used 2007 OKK KCV-800

2007 OKK KCV-800 with High Pressure CTS, 40 Station ATC, Conveyor, 12,000 RPM, CAT 50, Spindle Chiller, 120"x33"x28" Travels

Used 2013 Mazak Nexus QTN 450-II/3000 with 7.28" Bar Capacity, 120" Center, SMW Front Air Chuck, LNS Hyd. Steady Rest, Rear Chuck Prepped

2013 Mazak Nexus QTN 450-II/3000 with 7.28" Bar Capacity, 120" Center, SMW Front Air Chuck, LNS Hyd. Steady Rest, Rear Chuck Prepped

Used 2006 Haas VF1D with Prog. Coolant, Auto Air Gun, Auger Conveyor, Very Low Hours, USB Port

2006 Haas VF1D with Prog. Coolant, Auto Air Gun, Auger Conveyor, Very Low Hours, USB Port

Used 2010 Haas VF2SS with 24 Station SMATC, 12,000 RPM, Remote Jog Handle, USB Port Interface, High Intensity Lighting

2010 Haas VF2SS with 24 Station SMATC, 12,000 RPM, Remote Jog Handle, USB Port Interface, High Intensity Lighting

Used 2014 SMTCL EGC 2040 Bridge Style with 157"x78"x39" Travels, 50 Taper, 6000 RPM, 40 ATC, Fanuc 0i-MD Control

2014 SMTCL EGC 2040 Bridge Style with 157"x78"x39" Travels, 50 Taper, 6000 RPM, 40 ATC, Fanuc 0i-MD Control

Used 2015 Visionwide NF-3226 Bridge Style VMC with Tool & Part Probing, 1000 PSI TSC, Chip Conveyor, Chiller Unit

2015 Visionwide NF-3226 Bridge Style VMC with Tool & Part Probing, 1000 PSI TSC, Chip Conveyor, Chiller Unit

Used 2014 Southwestern Industries Trak TRL 1630SX with Prototrak SLX Control, Tailstock, Toolpost, 8" 3 Jaw Chuck, Coolant System

2014 Southwestern Industries Trak TRL 1630SX with Prototrak SLX Control, Tailstock, Toolpost, 8" 3 Jaw Chuck, Coolant System

Used 2013 Southwestern Industries Trak TRL 1630SX with Prototrak SLX Control, Tailstock, Tool Post, 10" 3 Jaw Chuck, Coolant

2013 Southwestern Industries Trak TRL 1630SX with Prototrak SLX Control, Tailstock, Tool Post, 10" 3 Jaw Chuck, Coolant

Used 2019 Haas Mini Mill 2 with Probing Package, Programmable Coolant, Auto Air Gun, Coolant System, LOW HOURS

2019 Haas Mini Mill 2 with Probing Package, Programmable Coolant, Auto Air Gun, Coolant System, LOW HOURS

Used 2012 Haas EC-400 6-Pallet Pool with 70 Pos. ATC, Probing, Full 4th Axis Pallet Rotation, Programmable Coolant

2012 Haas EC-400 6-Pallet Pool with 70 Pos. ATC, Probing, Full 4th Axis Pallet Rotation, Programmable Coolant

Used 2006 Southwestern Industries TRAK TRL 1840SX with Steady Rest, Tailstock, 8 Pos. Indexable Turret, 10" Chuck, Geared, SLX Cntrl.

2006 Southwestern Industries TRAK TRL 1840SX with Steady Rest, Tailstock, 8 Pos. Indexable Turret, 10" Chuck, Geared, SLX Cntrl.

Used 2011 Haas EC-500, 40 Pos. ATC, 1000 PSI Coolant Thru Spindle, Haas Probing, 1 Degree Pallet Indexing, 2 Pallet Changer

2011 Haas EC-500, 40 Pos. ATC, 1000 PSI Coolant Thru Spindle, Haas Probing, 1 Degree Pallet Indexing, 2 Pallet Changer

Used 2012 Haas EC-500 with 40 Pos. ATC, 1000 PSI Coolant Thru Spindle, Haas Probing Package, 1 Deg Pallet Index, 2 Pallet Changer

2012 Haas EC-500 with 40 Pos. ATC, 1000 PSI Coolant Thru Spindle, Haas Probing Package, 1 Deg Pallet Index, 2 Pallet Changer

Used 2005 Haas EC-400, Full 4th Axis Rotary Table, 300 PSI CTS, Haas Renishaw Probing, Tombstones, 40 Station ATC

2005 Haas EC-400, Full 4th Axis Rotary Table, 300 PSI CTS, Haas Renishaw Probing, Tombstones, 40 Station ATC

Used 2002 Haas VF2D with Haas Rotary Table, 24 Station Side Mount ATC, Chip Auger, Programmable Coolant

2002 Haas VF2D with 24 Station Side Mount ATC, Chip Auger, Programmable Coolant

Used 2007 Haas Mini Mill with 10 Station Tool Changer, Coolant, Can Use Either Single or Three Phase Power, 6794 Run Time Hours

2007 Haas Mini Mill with 10 Station Tool Changer, Coolant, Can Use Either Single or Three Phase Power, 6794 Run Time Hours

Used 2004 Milltronics RH33

2004 Milltronics RH33

Used 2015 Haas UMC-750

2015 Haas UMC-750 with Coolant Through Spindle, Haas Probing, 40 Station ATC, 12,000 RPM, Hi Spd Machining, Chip Conveyor

Used 2006 Visionwide VTEC VF-4000 Bridge Style VMC, 165"x90"x40", CAT50, 6000 RPM, 40 ATC, New Spindle in 2024

2006 Visionwide VTEC VF-4000 Bridge Style VMC, 165"x90"x40", CAT50, 6000 RPM, 40 ATC, New Spindle in 2024

Used 2004 Daewoo DMV3016d

2004 Daewoo DMV3016d Rigid Tapping, Remote Jog Handle, Engraving Program, Only 527 Cutting Hours

Used 1999 EZ-Spark ES-1208C EDM

1999 EZ-Spark ES-1208C EDM

Used 2006 Haas VM-2 with Haas HRT210 4th Axis Table, Prog. Coolant, Remote Jog Handle, 24 Station Side Mount ATC, High Spd Machining

2006 Haas VM-2 with Haas HRT210 4th Axis Table, Prog. Coolant, Remote Jog Handle, 24 Station Side Mount ATC, High Spd Machining

Used 2006 Mazak Integrex 100-IVS

2006 Mazak Integrex 100-IV S Multi Tasking Mill Turn Lathe, C Axis, Live Milling/Drilling, Subspindle, Y-Axis, Chip Conveyor, 40 ATC

Used 2001 Haas VF2 with 4th Axis Drive, Programmable Coolant, Chip Auger, USB Emulator, Rigid Tapping, 24 Station Side Mounted ATC

2001 Haas VF2 with 4th Axis Drive, Programmable Coolant, Chip Auger, USB Emulator, Rigid Tapping, 24 Station Side Mounted ATC

Used 2019 Haas ST-20Y with Subspindle, Milling, Y Axis, Haas Barfeeder, Chip Conveyor, Parts Catcher, LOW HOURS

2019 Haas ST-20Y with Subspindle, Milling, Y Axis, Haas Barfeeder, Chip Conveyor, Parts Catcher, LOW HOURS

Used 2015 OKK HMC-500 with Full 4th Axis, 60 Station Tool Changer, CAT40 Big Plus Spindle, High Press. Coolant Thru Spindle

2015 OKK HMC-500 with Full 4th Axis, 60 Station Tool Changer, CAT40 Big Plus Spindle, High Press. Coolant Thru Spindle

Used 2012 Hyundai-Kia SKT250TTSY Fanuc 18i-TB

2008 Hyundai-Kia SKT200TTSY with Twin Turrets, Twin Spindles, Live Tooling, Y Axis, 2.56" Bar Capacity, Chip Conveyor

Used 2016 Haas UMC-750SS WIPS Renishaw Tool & Part Probe, High-Speed Machining, Rigid Tapping, Coolant Thru the Spindle, Programmable Coolant, 1GB Memory

2016 Haas UMC-750SS WIPS Renishaw Tool & Part Probe, High-Speed Machining, Rigid Tapping, Coolant Thru the Spindle, Programmable Coolant, 1GB Memory

Used 1998 Behringer HBP-530A Automatic Horizontal Bandsaw w/ 20.8" Round Cutting Cap., Feeder Tables

1998 Behringer HBP-530A Automatic Horizontal Bandsaw w/ 20.8" Round Cutting Cap., Feeder Tables

Used 2002 Milltronics ML14

2002 Milltronics ML-15

Used 2018 Haas Mini Mill-EDU

2018 Haas Mini Mill-EDU

Used 2014 Haas ST-40 with SMW Hydraulic Steady Rest, 4" Bar Capacity, Toolsetter, Tailstock, Chip Conveyor, 44" Centers

2014 Haas ST-40 with SMW Hydraulic Steady Rest, 4" Bar Capacity, Toolsetter, Tailstock, Chip Conveyor, 44" Centers

Used 2020 Doosan Puma TT2100SYYB

2020 Doosan Puma TT2100SYYB with LNS Sprint 12' Barfeed, Parts Catcher, Chip Conveyor, Full C Axis, Y Axis, Subspindle

Used 2007 Mori Seiki SL403C/2000 with 80" cc, 6.5" Bar Capacity, 18" Air Chuck, SMW Hydr. Steady Rest, Tailstock, MSX-500III Control

2007 Mori Seiki SL403C/2000 with 80" cc, 7.3" Bar Capacity, 18" Air Chuck, SMW Hydr. Steady Rest, Tailstock, MSX-500III Control

Used 2002 Milltronics RW12

2002 Milltronics RW12

Used 1989 Quincy Model EE-5120 Electric Reciprocating Air Compressor

1989 Quincy Model EE-5120 Electric Reciprocating Air Compressor

Used 2013 Brown & Sharpe Global Advantage 555 CMM

2013 Brown & Sharpe Global Advantage 555 CMM

Used 2022 Tormach 1100M with Microarc 4th axis Rotary Table (never used), 10 Station ATC, Subplate, Tool Setter, Digital Passive Probe

2022 Tormach 1100M w/ Premium Package, Microarc 4th axis Table (never used), 10 Station ATC, Tool Setter, Digital Passive Probe

Used 1965 Bridgeport Series I with a Proto Trak SMX Control

1980 Bridgeport Series I with a Proto Trak SMX Control

Used 2019 Hyundai Wia LV1100R

2015 Hyundai Wia LV1100R

Used 2010 Doosan Puma 2600LM, 30.7" sw, 50.4" cc, C Axis, Milling/Drilling, 3" Bar Capacity, 10" Chuck, Tailstock, Chip Conveyor, Tool Eye

2010 Doosan Puma 2600LM, 30.7" sw, 50.4" cc, C Axis, Milling/Drilling, 3" Bar Capacity, 10" Chuck, Tailstock, Chip Conveyor, Tool Eye

Used 2011 Hardinge Bridgeport GX1000 OSP with 4th Axis Rotary Table

2011 Hardinge Bridgeport GX1000 OSP with 4th Axis Rotary Table, 10,000 RPM, Side Mounted ATC

Used 1996 Mazak V414/32

2000 Mazak Mazatech V414/32 with 24 Station Side Mounted ATC, Tool Length Measurement Probe, Rigid Tapping

Used 1993 Mazak Super Turbo-X510 HI-PRO-SC 2000 Watt Laser L Plus

1993 Mazak Super Turbo-X510 HI-PRO-SC 2000 Watt Laser

Used 2018 Haas Mini Mill

2018 Haas Mini Mill

Used 2019 Haas TM-1P with Haas Probing, Prog. Coolant, 10 ATC, ONLY 564 Feed Cut Hours. Very Nice Condition

2019 Haas TM-1P with Haas Probing, Prog. Coolant, 10 ATC, ONLY 564 Feed Cut Hours. Very Nice Condition

Used 2021 Haas UMC-500SS 5 Axis Universal Machining Center with Coolant Thru Spindle, Probing, HSM, Conveyor, 50 Station ATC

2021 Haas UMC-500SS 5 Axis Universal Machining Center with Coolant Thru Spindle, Probing, HSM, Conveyor, 50 Station ATC

Used 2013 Hwacheon T2-2T with Twin Spindle, Twing Turrets, Live Milling/Drilling, Parts Catcher & Conveyor, Chip Conveyor, Fanuc 0i-TD

2013 Hwacheon T2-2T with Twin Spindle, Twing Turrets, Live Milling/Drilling, Parts Catcher & Conveyor, Chip Conveyor, Fanuc 0i-TD

Used 2011 Mori Seiki NL2500/1250 with Tailstock, Tool Presetter, 12" Hyd Chuck, Chip Conveyor

2011 Mori Seiki NL2500/1250 with Tailstock, Tool Presetter, 12" Hyd Chuck, Chip Conveyor

Used 2012 Haas VM-6 with Haas Probing, Coolant Through the Spindle, 4th Axis Drive, Auger, 40 Station ATC, HSM, Boom Crane

2012 Haas VM-6 with Haas Probing, Coolant Through the Spindle, 4th Axis Drive, Auger, 40 Station ATC, HSM, Boom Crane

Used 2022 Haas UMC-500SS with Haas Probing System, Remote Jog Handle, 15,000 RPM, 30 Station ATC

2022 Haas UMC-500SS with Haas Probing System, Remote Jog Handle, 15,000 RPM, 30 Station ATC

Used 2023 DN Solutions Puma 4100LB

2023 DN Solutions Puma 4100LB

Used 2023 Haas ST-10 Chucker with Chip Conveyor, Tool Presetter, 6.5" Hyd Chuck, Under 200 Cut Hours

2023 Haas ST-10 Tool Eye, Chip Conveyor, Rigid Tapping

Used 2022 Haas UMC-500 with 15,000 RPM Spindle, Coolant Thru Spindle, Haas Probing, 30 Station ATC, High Speed Machining

2022 Haas UMC-500 with 15,000 RPM Spindle, Coolant Thru Spindle, Haas Probing, 30 Station ATC, High Speed Machining

Used 2004 Daewoo Puma 240MSB

2004 Daewoo Puma 240MSB with Milling Capability, C Axis, SMW Barfeed, Chip Conveyor, Parts Catcher

Used 2009 Mazak Nexus QTN 250-II/1500 with RARE 60" centers, Tailstock, Chip Conveyor, Toolsetter, 10" Chuck, 3" Bar Capacity

2009 Mazak Nexus QTN 250-II/1500 with RARE 60" centers, Tailstock, Chip Conveyor, Toolsetter, 10" Chuck, 3" Bar Capacity

Used 2000 Okuma Space Turn LB300

2000 Okuma Space Turn LB300, Tailstock, Chip Conveyor, 10" Hyd Chuck, NOT UNDER POWER SOLD AS IS, MAKE OFFER!!

Used 2011 Haas VF-3SS

2011 Haas VF-3SS

Used 2007 Atrump RL-3040 CNC Wheel Repair Lathe, Upgraded Lenco Operating Syst in 2015, 30" x 40", 10 HP, 2200 RPM, Geared

2007 Atrump RL-3040 CNC Wheel Repair Lathe, Upgraded Lenco Operating Syst in 2015, 30" x 40", 10 HP, 2200 RPM, Geared

Used 2013 Milltronics RH30

2010 Milltronics RH30

Used 2015 Doosan Lynx 220LC with 8" Hyd Chuck, Toolsetter, Tailstock, Parts Catcher, Chip Converyor, Barfeed Interface ONLY

2015 Doosan Lynx 220LC with 8" Hyd Chuck, Toolsetter, Tailstock, Parts Catcher, Chip Converyor, Barfeed Interface ONLY

Used 2011 Doosan Puma 2600 with 10" Chuck, Tailstock, Tool Presetter, Chip Conveyor, Fanuc 0i Control

2011 Doosan Puma 2600 with 10" Chuck, Tailstock, Tool Presetter, Chip Conveyor, Fanuc 0i Control

Used 2013 Lenco M210 Wheel Turning Lathe with Chuck, Single Phase Power, Maintenanced in 2024

2013 Lenco M210 Wheel Turning Lathe with Chuck, Single Phase Power, Maintenanced in 2024

Used 2020 Haas UMC-500

2020 Haas UMC-500, Coolant Thru Spindle, Haas Probing, 30 ATC, Chip Conveyor, 10,000 RPM, PCool, Low Hours

Used 2024 Haas EC-400 PP

2024 Haas EC-400 PP 6-Pallets, WIPS Renishaw Tool & Part Probe, Remote Jog Handle, Coolant Thru the Spindle, Full 4th Axis, Chip Conveyor

Used 2013 Haas VF2 with Chip Auger, Progr. Coolant Nozzle, Prepped for Coolant Thru Spindle, Rigid Tap, ONLY 519 Feed Cut Hours

2013 Haas VF2 with Chip Auger, Progr. Coolant Nozzle, Prepped for Coolant Thru Spindle, Rigid Tap, ONLY 519 Feed Cut Hours

Used 2009 VTEC VF-4000 Double Column Style Bridge Mill with 40 ATC, Coolant Thru Spindle, 6000 RPM, CAT50, 165"x90"x36"

2009 Visionwide VTEC VF-4000 Double Column Style Bridge Mill with 40 ATC, Coolant Thru Spindle, 6000 RPM, CAT50, 165"x90"x36"

Used 2010 Haas ST-20 with 8.3" Chuck, Chip Conveyor, Tailstock, 2" Bar Capacity

2010 Haas ST-20 with 8.3" Chuck, Chip Conveyor, Tailstock, 2" Bar Capacity

Used 2018 Haas UMC-750 5 Axis Universal Machining Center, 40 ATC, Probing, 1000 PSI CTS, Conveyor

2018 Haas UMC-750 5 Axis Universal Machining Center, 40 ATC, Probing, 1000 PSI CTS, Conveyor

Used 1996 Mitsubishi M-VS25/20 Bridge Style CNC Mill with Head Changer, 5 Sided Machining, 60 ATC

1996 Mitsubishi M-VS25/20 Bridge Style CNC Mill with Head Changer, 5 Sided Machining, 60 ATC

Used 2014 Mazak Vortex e-1060V/8 Heavy Duty 5 Axis Milling Machine with Built in Rotary Table, Tilting B Axis Head, HPC, 120 Pos. ATC

2014 Mazak Vortex e-1060V/8 Heavy Duty 5 Axis Milling Machine with Built in Rotary Table, Tilting B Axis Head, HPC, 120 Pos. ATC

Used 2020 Mazak Quick Turn 350 MY/2000 with Milling, Y Axis, 80" Centers, Tailstock, Steady Rest, 12" Chuck, 4" Bar Capacity

2020 Mazak Quick Turn 350 MY/2000 with Milling, Y Axis, 80" Centers, Tailstock, Steady Rest, 12" Chuck, 4" Bar Capacity

Used 2019 Haas EC-1600ZT with Extended Z Axis Travel, 7500 RPM, Integrated 4th Axis Platter, TSC, Renishaw Probing, 30 ATC

2019 Haas EC-1600ZT with Extended Z Axis Travel, 7500 RPM, Integrated 4th Axis Platter, TSC, Renishaw Probing, 30 ATC

Used 2020 Tormach 1100MX w/4th axis Rotary Table

2025 Tormach 1100MX w/4th axis Rotary Table

Used 2011 Mazak Integrex i-400 Mill Turn Center with Live Tooling, Y Axis, Tailstock, 60" Centers, 4" Bar Capacity, 36 Pos. ATC

2011 Mazak Integrex i-400/1500 Mill Turn Center with Live Tooling, Y Axis, Tailstock, 60" Centers, 4" Bar Capacity, 36 Pos. ATC

Used 2009 Haas TL-1

Used 2006 Mazak Nexus QTN 100-II M with Full C Axis Milling, Chip Conveyor, LNS Short Barfeed, Parts Catcher, Tailstock, Tool Eye

2006 Mazak Nexus QTN 100-II M with Full C Axis Milling, Chip Conveyor, LNS Short Barfeed, Parts Catcher, Tailstock, Tool Eye

Used 2004 Mazak Nexus QTN 200 M

2004 Mazak Nexus QTN 200 M with Live Milling, LNS Barfeed, Parts Catcher, Rear Chip Conveyor, Spindle Liners, Live Holders

Used 2000 Mazak SQT100MSY with Milling, Y Axis, Subspindle, LNS Servo S2 Barfeed, Chip Conveyor, Parts Catcher, Tooling

2000 Mazak SQT100MSY with Milling, Y Axis, Subspindle, LNS Servo S2 Barfeed, Chip Conveyor, Parts Catcher, Tooling

Used 2002 Haas VF-3B with 24 Station Side Mounted ATC, Chip Auger, Pcool, 2 Spd Gearbox, USB Port, 4th Axis Drive, Rigid Tapping

2002 Haas VF-3B with 24 Station Side Mounted ATC, Chip Auger, Pcool, 2 Spd Gearbox, USB Port, 4th Axis Drive, Rigid Tapping

Used 1973 Ransome 100P Welding Positioner

1972 Ransome 100P Welding Positioner

Used Ransome 40-P 59" Welding Positioner

1970 Ransome 40-P 59" Welding Positioner

Used 2012 Haas ST-40

2012 Haas ST-40 with 15" Hyd Chuck, 4" Bar Capacity, Tailstock, Chip Conveyor, High Pressure Coolant, Geared Headstock

Used 2015 Haas VF-2SS

2015 Haas VF-2SS, 15k rpm Spindle, 4th/5th Axis Drives, Programmable Coolant & Air, Rigid Tapping

Used 2005 Mazak Nexus QTN 350M/1200 with Full C Axis Milling, Chip Conveyor, 48" cc, 4" Bar Capacity, 15" Chuck, Tailstock

2005 Mazak Nexus QTN 350M/1200 with Full C Axis Milling, Chip Conveyor, 48" cc, 4" Bar Capacity, 15" Chuck, Tailstock

Used 2008 Haas SL-20T with Tailstock, 8" Hyd Chuck, Tool Presetter, Parts Catcher, Chip Auger, 2" Bar Cap., Cold Fire II Processor

2008 Haas SL-20T with Tailstock, 8" Hyd Chuck, Tool Presetter, Parts Catcher, Chip Auger, 2" Bar Cap., Cold Fire II Processor

Used 2014 Haas ST-35

2014 Haas ST-35 with 15" Chuck, 4" Bar Cap., Tailstock, Chip Conveyor, Tool Presetter, Hi Press Cool.

Used 2012 Haas VF-3YT/40 with Coolant Thru Spindle, Haas Probing, 40 Station SMATC, Auger, Pcool

2012 Haas VF-3YT/40 with Coolant Thru Spindle, Haas Probing, 40 Station SMATC, Auger, Pcool

Used 2007 Haas VF2 with Chip Auger, PCool, Quick Code, Floppy Drirve

2007 Haas VF2 with Chip Auger, PCool, Quick Code, Floppy Drirve

Used 2007 Mori Seiki NL2500MC/700 with 3" Bar Cap., Chip Conveyor, Tailstock, Tool Presetter, Bar Feeder, Parts Exit Conveyor

2007 Mori Seiki NL2500MC/700 with 3" Bar Cap., Chip Conveyor, Tailstock, Tool Presetter, Bar Feeder, Parts Exit Conveyor

Used 2008 Haas Mini Mill

2008 Haas Mini Mill

Used 2006 Haas VF-2D

2006 Haas VF-2D WIPS Renishaw Tool & Part Probe, Wired for 4th Axis, Macros, Programmable Coolant, 10k rpm Spindle, High-Speed Machining

Used 2007 Southwestern Industries TRAK TRL 1840V

1999 Southwestern Industries TRAK TRL 1840V

Used 2008 Haas SL-20T with Milling, Full C Axis, Tailstock, 8.3" Chuck, Chip Auger, 12 Pos. Turret, 2" Bar Capacity

2008 Haas SL-20T with Milling, Full C Axis, Tailstock, 8.3" Chuck, Chip Auger, 12 Pos. Turret, 2" Bar Capacity

Used 2004 Haas TM-1 with Haas HA-5C Collet Indexer, 4th Axis Drive, Hand Wheels, Single or Three Phase Power, NO TOOL CHANGER or Coolant Tank

2004 Haas TM-1 with Haas HA-5C Collet Indexer, 4th Axis Drive, Hand Wheels, Single or Three Phase Power, NO TOOL CHANGER or Coolant Tank

Used 2006 Haas TM-1 with Haas HA-5C Collet Indexer, 4th Axis Drive, Hand Wheels, Single or Three Phase Power, NO TOOL CHANGER or Coolant Tank

2006 Haas TM-1 with Haas HA-5C Collet Indexer, 4th Axis Drive, Hand Wheels, Single or Three Phase Power, NO TOOL CHANGER or Coolant Tank

Used 2002 Romi M27 x 120" with 4" Bar Capacity, Tailstock, 15" Chuck, 8 Station Turret, Chip Conveyor

2002 Romi M27 x 120" with 4" Bar Capacity, Tailstock, 15" Chuck, 8 Station Turret, Chip Conveyor

Used 2005 Okuma Captain L470M with C Axis, Milling Capability, 12" Hyd. Chuck, Tailstock, Tool Presetter, Chip Conveyor

2005 Okuma Captain L470M with C Axis, Milling Capability, 12" Hyd. Chuck, Tailstock, Tool Presetter, Chip Conveyor

Used 2007 Fadal VMC8030D-3HT with 24 Pos. Side Mounted ATC, Fanuc Cntrl, 80"x30"x30" travels, Absolute Positioning, 10,000 RPM

2007 Fadal VMC8030D-3HT with 24 Pos. Side Mounted ATC, Fanuc Cntrl, 80"x30"x30" travels, Absolute Positioning, 10,000 RPM

Used 2022 Haas ST-10 Chucker, Tool Presetter, Chip Conveyor, Rigid Tapping 1GB Program Memory **Only 121 Run Time Hours**

2022 Haas ST-10 Chucker, Tool Presetter, Chip Conveyor, Rigid Tap, 6.5" Hyd Chk, Royal Collet Chk, **Only 121 Run Time Hours**

Used 2012 Haas VF-11/40

2012 Haas VF-11/40, WIPS Renishaw Tool & Part Probe, Remote Jog Handle, Coolant thru the Spindle

Used 2014 Haas VF5/40 XT with Extended 60" X Axis Travel, Chip Auger, Prog. Cool, 20 Station ATC, Rigid Tap

2014 Haas VF5/40 XT with Extended 60" X Axis Travel, Chip Auger, Prog. Cool, 20 Station ATC, Rigid Tap

Used 2021 Haas UMC-500 5 Axis Universal Machining Center with Coolant Thru Spindle, Probing, 10k RPM

2021 Haas UMC-500 5 Axis Universal Machining Center with Coolant Thru Spindle, Probing, 10k RPM

Used 2004 Haas VF-2SS with Haas Probing, 24 Pos. Side Mount ATC, 12,000 RPM, CAT 40, HSM, 30 HP, PCool, Auger, Floppy Drive

2004 Haas VF-2SS with Haas Probing, 24 Pos. Side Mount ATC, 12,000 RPM, CAT 40, HSM, 30 HP, PCool, Auger, Floppy Drive

Used 2024 Haas VF-2SS, HRT210 Rotary Table w/8" 3-Jaw Chuck, WIPS Renishaw Tool & Part Probe, Thru the Spindle Coolant, High-Speed Machining, Programmable Coolant

2024 Haas VF-2SS, HRT210 Rotary Table w/8" 3-Jaw Chuck, WIPS Renishaw Tool & Part Probe, Thru the Spindle Coolant, High-Speed Machining, Programmable Coolant

Used 2008 Weiler E90/3000 with 14" Bar Capacity, (2) 31" 4 Jaw Chucks, 120" cc, Chip Conveyor, Tailstock, Steady Rest, Weiler Control

2008 Weiler E90/3000 with 14" Bar Capacity, (2) 31" 4 Jaw Chucks, 120" cc, Chip Conveyor, Tailstock, Steady Rest, Weiler Control

Used 2008 Weiler E90/2000

2008 Weiler E90/2000 with 14" Bar Capacity, (2) 31" 4 Jaw Chucks, 80" cc, Chip Conveyor, Tailstock, Steady Rest, Weiler Control

Used 2006 Southwestern Industries TRL 1840SX with Tailstock, 4 Pos. Indexable Turret, 10" Chuck, Geared, SLX Cntrl., Traking, Handwheels

2008 Southwestern Industries TRL 1840SX with Tailstock, 4 Pos. Indexable Turret, 10" Chuck, Geared, SLX Cntrl., Traking, Handwheels

Used 2015 Doosan Lynx 220LMA

2015 Doosan Lynx 220LMA

Used 2013 Haas VF-4SS w/Wired for 4th/5th axis, Remote Jog Handle, WIPS Renishaw Tool & Part Probe, Programmable Coolant Nozzle

2013 Haas VF-4 w/Wired for 4th/5th axis, TR-310 Trunnion Table, Remote Jog Handle, WIPS Renishaw Tool & Part Probe, Programmable Coolant Nozzle

Used 2018 Mazak Nexus VCN 530C-II with 4th Axis Rotary Table, Renishaw Tool Probe, Chip Conveyor, 15,000 RPM, BT40, Tooling, 30 ATC

2018 Mazak Nexus VCN 530C with 4th Axis Rotary Table, Renishaw Tool Probe, Chip Conveyor, 15,000 RPM, BT40, Tooling, 30 ATC

Used 2007 Haas VF4B with 4th Axis Drive, 24 Pos. Side Mounted ATC, 10,000 RPM, 2 Spd Gearbox, Pcool, Chip Auger, Nice Shape

2007 Haas VF4B with 4th Axis Drive, 24 Pos. Side Mounted ATC, 10,000 RPM, 2 Spd Gearbox, Pcool, Chip Auger, Nice Shape

Used 2006 Haas SL-30T with Haas Servo 300 Barfeeder, 3" Bar Capacity, 10" Chuck, Tailstock, Toolsetter, Chip Auger, 12 Pos. Block Turret

2006 Haas SL-30T with Haas Servo 300 Barfeeder, 3" Bar Capacity, 10" Chuck, Tailstock, Toolsetter, Chip Auger, 12 Pos. Block Turret

Used 2018 Haas VF-11/40, WIPS Renishaw Tool & Part Probe, Remote Jog Handle, 1000 psi Coolant thru the Spindle, 12k rpm, HRT-310 Rotary Table

2018 Haas VF-11/40, WIPS Renishaw Tool & Part Probe, Remote Jog Handle, 1000 psi Coolant thru the Spindle, 12k rpm,

Used 2023 DoAll Model DS-600SA Dual-Miter Semi-Automatic Horizontal Band Saw

2023 DoAll Model DS-600SA Dual-Miter Semi-Automatic Horizontal Band Saw

Used 2003 Mori Seiki SL-154SY

2003 Mori Seiki SL-154SY with Milling, Y Axis, Subspindle, Barfeed, Tooling, VERY NICE CONDITION !!!

Used 2008 Haas VF2D with 10,000 RPM, Chip Auger, Programmable Coolant Nozzle, USB Port, 9734 Spindle Hours

2008 Haas VF2D with 10,000 RPM, Chip Auger, Programmable Coolant Nozzle, USB Port, 9734 Spindle Hours

Used 2005 Mazak Nexus VCN-410A with Coolant Thru Spindle, Chip Conveyor, 30 Station Side Mounted ATC, 12,000 RPM

2005 Mazak Nexus VCN-410A with Coolant Thru Spindle, Chip Conveyor, 30 Station Side Mounted ATC, 12,000 RPM

Used 2015 Doosan Lynx 220LMA

2015 Doosan Lynx 220LMA Tool Eye, Parts Catcher, Live Tooling