Advanced Filters

Category

Manufacturer

By Machine Type

PRICE REDUCED!! ONLY $5950 FOB TRUCK

Used 2006 Milltronics Partner VK2

2006 Milltronics Partner VK2 2 Axis CNC Knee Mill (3 Available)with R8 Quick Change Tool Syst., Centurion 7 Cntrl. w/ Conversational

Featured

Used 1997 Hoist FKE 6 - 12,000 lb. Electric Forklift

1997 Hoist FKE 6 - 12,000 lb. Electric Forklift and Charger

ON OUR FLOOR !! ONLY $7,900 LOADED !!

Used 2005 Milltronics RW20

2005 Milltronics RW20 3 Axis VMC with 16 Pos. Side Mount ATC, Centurion 7 Control, Boxed Ways, G Code & Conversational Programming

PRICE REDUCED!! ONLY $5950 FOB TRUCK

Used 2006 Milltronics Partner VK2

2006 Milltronics Partner VK2 2 Axis CNC Knee Mill (3 Available)with R8 Quick Change Tool Syst., Centurion 7 Cntrl. w/ Conversational

Duplicate of Hardinge HC, Excellent!!

Used 2006 Cyclematic CHR68 EVS Chucker Tool Room Lathe (Hardinge HC Type)

2006 Cyclematic CHR68 EVS Chucker Tool Room Lathe (Hardinge HC Type), Heidenhain DRO, 8 Station Turret

PRICE JUST REDUCED !!! JUST $99,500

Used 2006 Hankook Protec 9NC/4000 with 10" Bar Capacity, 160" Centers, (2) 25" Manual Chucks, Fanuc 21iTB Control

2006 Hankook Protec 9NC/4000 with 10" Bar Capacity, 160" Centers, (2) 25" Manual Chucks, Fanuc 21iTB Control

PRICE JUST REDUCED !!!!

Used 2007 Okuma Captain L470M/1250 Big Bore OSP P-200L with Milling Capability and 3.5" Bar Capacity, Chip Conveyor, Tool Eye

2007 Okuma Captain L470M/1250 Big Bore OSP P-200L with Milling Capability and 3.5" Bar Capacity, Chip Conveyor, Tool Eye

CHECK OUT VIDEO!!

Used 2015 Okuma M560-V with 4th Axis Rotary Table, Renishaw Tool & Part Probing, 15k RPM, 32 Pos. ATC, Chip Claster HPC

2015 Okuma Genos M560-V with 4th Axis Rotary Table, Renishaw Tool & Part Probing, 15k RPM, 32 Pos. ATC, Chip Blaster HPC

Available Immediately !!

Used 2017 Haas ST-35 with Tailstock, Chip Conveyor, Parts Catcher, Toolsetter, 4" Bar Capacity, 31.75" sw, 26" cc, 40 HP, Geared Head

2017 Haas ST-35 with Optional 2400 RPM, 40 HP, 2 Speed, 4" Bar Cap, Tailstock, Conveyor, P/C, Toolsetter, 31.75" sw, 26" cc

Featured

Used 2013 C.R. Onsrud Model 122S18 CNC Router with 120" x 60" Table, 24,000 RPM, 18 HP, HSK63F Taper, 12 Station ATC, Very Clean!

2013 C.R. Onsrud Model 122S18 CNC Router with 120" x 60" Table, 24,000 RPM, 18 HP, HSK63F Taper, 12 Station ATC, Very Clean!

Featured

Used 2005 Mazak Nexus VCN 510C Chip Conveyor, Remote Jog Handle, Misc Tooling

2005 Mazak Nexus VCN 510C Chip Conveyor, Remote Jog Handle, Misc Tooling

Featured

Used 2008 Haas VR-8/40 5-Axis Head, WIPS Renishaw Tool & Part Probe, Coolant Thru the Spindle, Programmable Coolant, Remote Jog Handle

2008 Haas VR-8/40 5-Axis Head, WIPS Renishaw Tool & Part Probe, Coolant Thru the Spindle, Programmable Coolant, Remote Jog Handle

Featured

Used 2023 Haas VM-6 with 15,000 RPM, 30 Station Side Mount ATC, Haas Probing, PCool, Chip Auger

2023 Haas VM-6 with Haas Probing Package, 15,000 RPM, 30 Station Side Mount ATC, PCool, Chip Auger, Linear Scales

AFFORDABLE MULTI AXIS MACHINING !!

Used 2010 Mori Seiki NT1000 SZ with C Axis Spindle Rotation, Live Milling, Y Axis, B Axis Pendulum Head, Lower Turret, Barfeed, MORE !!

2010 Mori Seiki NT1000 SZ with C Axis Spindle Rotation, Live Milling, Y Axis, B Axis Pendulum Head, Lower Turret, Barfeed, MORE !!

Used 1978 Do-All C-5A

1978 Do-All C-5A

Used 2010 Kitamura HX-1000i

2010 Kitamura HX-1000i

Used 1994 LNS Hydrobar Sprint 12' Magazine Barfeed

1994 LNS Hydrobar Sprint 12' Magazine Barfeed

Used 1991 LNS HYS 7.76 3.5

1991 LNS HYS 7.76 3.5

Used 1993 LNS HYS 7.76 3.3

1993 LNS HYS 7.76 3.3

Used 1984 Mazak Megaturn A12 w/2 Pallets

1984 Mazak Megaturn A12 w/2 Pallets

Used 2003 Nakamura Tome WTS-150

2003 Nakamura Tome WTS-150

Used 2003 Okuma Ace Center MB-46VAE

2003 Okuma Ace Center MB-46VAE

Used 2007 Republic-Lagun RL-2775

2007 Republic-Lagun RL-2775

Used 1995 SMW Switcher 200S

1995 SMW Switcher 200S

Used 1950 South Bend 16 Type A Precision Tool Room Lathe

1950 South Bend 16 Type A Precision Tool Room Lathe

Used 1956 Warner & Swasey 4A-M1500 with 9.25" Big Bore Spindle

1956 Warner & Swasey 4A-M1500 with 9.25" Big Bore Spindle

Used Wotan Rapid 0

Used 1998 Hyundai Hit-30F

1998 Hyundai Hit-30F

Used 1999 Saylor-Beall 25DR Screw Type Air Compressor

1999 Saylor-Beall 25DR Screw Type Air Compressor

Used Keyence XM-M1200 CMM

2021 Keyence XM-1200 CMM

Used 2018 Okuma Genos L300-MYW

2018 Okuma Genos L300-MYW-e X500 with Milling, Subspindle, Y Axis, Parts Catcher, Chip Conveyor, Barfeed Interface ONLY

Used 2019 Weiss Technik PVH120/70/6 Temperature/Humidity Test Chamber

2019 Weiss Technik PVH120/70/6 Temperature/Humidity Test Chamber

Used Bulldozer Type 300 Ton Horizontal Hydraulic Press

Bulldozer Type 300 Ton Horizontal Hydraulic Press

Used 2008 SNK HPS-120B

2008 SNK HPS-120B

Used 2007 Matsuura H.Plus 300-PC11 Horizontal Machining Center with 11 Pallet Pool, Chip Blaster HPC, Full 4th, 120 ATC, Conveyor

2007 Matsuura H.Plus 300-PC11 Horizontal Machining Center with 11 Pallet Pool, Full 4th, 40 Station ATC, NEW Chip Conveyor & Coolant Tank

Used 1998 Hitachi Seiki HiTec-Turn 40G

1998 Hitachi Seiki HiTec-Turn 40G

Used 2003 Mazak Variaxis 630-5X 2-PC

2003 Mazak Variaxis 630-5X 2-PC

Used 2016 Haas TM-2P

2016 Haas TM-2P with 4th Axis Drive, Programmable Coolant Nozzle, Rigid Tapping

Used 2013 Okuma LT3000EX-BB2MY

2013 Okuma LT3000EX-BB2MY

Used 2018 DMG DMU 100P duoBlock

2018 DMG Mori DMU 100P duoBlock

Used 2013 Haas DS-30 Big Bore w/ Milling

2013 Haas DS-30 Big Bore w/ Milling

Used 2007 Yama Seiki TS-150

2007 Yama Seiki TS-150

Used 2009 Doosan HM-1000

2009 Doosan HM-1000

Used 2021 Okuma LB3000EXII-MYW 800 w/OGL10 Gantry Loader

2021 Okuma LB3000EXII-MYW 800 w/OGL10 Gantry Loader

Used 2008 Makino E33

2008 Makino E33

Used 1998 Piranha P90 Ironworker

1998 Piranha P90 Ironworker

Used 1999 Fadal VMC6030HT

1999 Fadal VMC6030HT

Used 1993 Fadal VMC6030HT

1993 Fadal VMC6030HT

Used 2012 Okuma Genos L400-e

2012 Okuma Genos L400-e

Used 2005 Milltronics RH15

2005 Milltronics RH15

Used 2014 Okuma MA-12500H

2014 Okuma MA-12500H

Used 1980 Hardinge TM

1980 Hardinge TM

Used Acer AGS-618

2000 Acer AGS-618

Used 2012 Haas DT-1

Used 2005 Haas TM-1P

2005 Haas TM-1P

Used 2012 Haas TL-3

Used 2011 Clausing VMC-1020SF

2011 Clausing VMC-1020SF

Used 2002 Vectrax GSN20V

2002 Vectrax GSN20V

Used 2009 Mazak SVC 2000L/200

2009 Mazak SVC 2000L/200-II High Speed VMC

Used 2014 Samsung SL-40/1500

2014 Samsung SL-40/1500 Heavy Duty CNC Lathe

Used 2006 Okuma & Howa Millac 852V w/ 4th Axis Rotary Table

2006 Okuma & Howa Millac 852V w/ 4th Axis Rotary Table

Used 2005 Toshiba BTD-110.R16 Tosnuc 888

2005 Toshiba BTD-110.R16 Tosnuc 888

Used 1993 Mazak SQT18MS w/ GL100 Gantry Loader

1993 Mazak SQT18MS w/ GL100 Gantry Loader

Used 2017 Yama Seiki GTW-1500Y Multi Axis Lathe

2017 Yama Seiki GTW-1500Y Multi Axis Lathe

Used 2016 Mazak Nexus HCN 4000-III

2016 Mazak Nexus HCN 4000-III

Used 2005 Okuma Millac 853PF-5X

2005 Okuma Millac 853PF-5X

Used 2018 Piranha C510 w/Tube Cutter

2018 Piranha C510 Plasma Table with Tube Cutter

Used 2015 DMG Mori NVL 1350MC

2015 DMG Mori NVL 1350MC

Used 2012 Allsteel 135-10 Press Brake

2000 Allsteel 135-10 Press Brake

Used 2007 Mori Seiki NL-2000/500

2007 Mori Seiki NL2000/500

Used 2007 Haas Super Mini Mill

2007 Haas Super Mini Mill

Used 2009 Mazak Nexus QTN 250-II

2009 Mazak Nexus QTN 250-II

Used 1984 Ultramatic Portaburr 5

1990 UltraMATIC Portaburr 5 Vibratory Tumbler, 5 Cubic Ft., 30 Gallons, 2 HP, Wired 230V Three Phase Power

Used 2011 Weiler E80 x 3000

2011 Weiler E80 x 3000

Used 2007 Vanguard CAK80485D 2 Axis Long Bed Shaft Lathe

2007 Vanguard CAK80485D 2 Axis Long Bed Shaft Lathe

Used 2007 Haas TM-2

Used 2004 Haas TM-2

Used 1996 Mayfran Chip Conveyor for a Mazak HTC400

1996 Mayfran Chip Conveyor for a Mazak HTC400

Used 2019 Fadal VMC 4020B-II with Factory 2 Pallet Changer

2019 Fadal VMC 4020B-II with Factory 2 Pallet Changer

Used 1986 Nakamura Tome TMC-20 2 Axis Lathe

1986 Nakamura Tome TMC-20 2 Axis Lathe

Used 2020 Econoline 101701G-A 60"x48" Abrasive Blast Cabinet

2023 Econoline 101701G-A 60"x48" Abrasive Blast Cabinet

Used 2007 Haas VF-3

2008 Haas VF-3B with Probing, 24 Station Side Mounted ATC, High Speed Machining, 4th Axis Drive

Used 2013 Mazak Nexus VCN 700E/40-II Large 3 Axis VMC

2013 Mazak Nexus VCN 700E/40-II Large 3 Axis VMC

Used 2022 Kennametal Tooling

2022 Kennametal Tooling

Used 2012 Geka Hydracrop 110 AD

2012 Geka Hydracrop 110 AD Iron Worker

Used 2008 Hurco VM-3

2008 Hurco VM-3

Used 2006 Kingston CL-38x2000

2006 Kingston CL-38x2000 with 7.3" Bar Capacity, Steady Rest, Tailstock, Dual Turret Design

Used 2011 Mazak Nexus QTN 350-II/2000 CNC Lathe with 80" Center Distance

2011 Mazak Nexus QTN 350-II/2000 CNC Lathe with 80" Center Distance

Used 2021 Keyence XM-2000 Portable CMM

2021 Keyence XM-2000 Portable CMM

Used 2004 Mazak Nexus VCN-410B w/4th Axis

2004 Mazak Nexus VCN-410B w/4th Axis

Used 2006 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, 15,000 RPM, Coolant Thru Spindle, High Speed Machining

2006 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, 15,000 RPM, Coolant Thru Spindle, High Speed Machining

Used 2011 Mori Seiki NHX-5000 with 60 ATC, HP Coolant Thru Spindle, 1 Degree Indexing

2011 Mori Seiki NHX-5000 with 60 ATC, HP Coolant Thru Spindle, 1 Degree Indexing

Used 2005 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, Chip Auger, Programmable Coolant

2005 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, Chip Auger, Programmable Coolant

Used 2007 Haas VF3B with Haas HRT210 Rotary Table, Coolant Through Spindle, Probing Package

2007 Haas VF3B with Haas HRT210 Rotary Table, Coolant Through Spindle, Probing Package

Used 2019 Haas Haas Automatic Parts Loader

2019 Haas Automatic Parts Loader

Used 2006 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, Coolant Through Spindle, Chip Auger

2006 Haas MDC-500 Mill Drill Center with 2 Pallet Changer, Coolant Through Spindle, Chip Auger

Used 2015 Haas VM-3 VMC, Probing, Coolant Through the Spindle, 4th Axis

2015 Haas VM-3 VMC, Probing, Coolant Through the Spindle, 4th Axis

Used 2006 Haas SL-20T with Tailstock, Tool Presetter, Chip Auger and 12 Station Hybrid Style Turret

2006 Haas SL-20T with Tailstock, Tool Presetter, Chip Auger and 12 Station Hybrid Style Turret

Used 2014 Haas ST-20Y with Y Axis, Live Milling, Parts Catcher, Chip Conveyor

2014 Haas ST-20Y with Y Axis, Live Milling, Parts Catcher, Chip Conveyor

Used 2020 Clausing Multi Turn CNC7000SC Lathe with 20" Chuck, 4" Bar Capacity

2020 Clausing Multi Turn CNC7000SC Lathe with 20" Chuck, 4" Bar Capacity

Used 2006 Doosan Puma MX2500ST 9 Axis Mill/Turn Center w/ Pendulum B Axis Head, Milling, Y Axis, Subspindle, Lower Turret

2006 Doosan Puma MX2500ST 9 Axis Mill/Turn Center w/ Pendulum B Axis Head, Milling, Y Axis, Subspindle, Lower Turret

Used 2008 Mazak FH-10800 2 Pallet HMC, 120 ATC, 1 Deg Indexing, Tool & Work Probing

2008 Mazak FH-10800 2 Pallet HMC, 120 ATC, 1 Deg Indexing, Tool & Work Probing

Used 2022 BLM Group Model LS5 12 KW Fiber Laser

2022 BLM Group Model LS5 12 KW Fiber Laser

Used 2018 Doosan HC400-II w/ 2 Pallet Changer, Full 4th Axis Rotary Table, 60 ATC, Coolant Through the Spindle, Probing

2018 Doosan HC400-II w/ 2 Pallet Changer, Full 4th Axis Rotary Table, 60 ATC, Coolant Through the Spindle, Probing

Used 2014 Trumpf Trubend 5230 CNC Press Brake w/ 6 Axis Back Gauge, Upper & Lower Clamping, CNC Prog Crowning, Extended Height

2014 Trumpf Trubend 5230 253 Ton CNC Press Brake w/ 6 Axis Back Gauge, Upper & Lower Clamping, CNC Prog Crowning, Ext. Height

Used 2010 Matsuura LX-0 5AX 5 Axis CNC High Speed VMC with 43,000 RPM, 30 Station ATC, BT 30 Spindle Taper, 3546 IPM RAPIDS !!

2010 Matsuura LX-0 5AX 5 Axis CNC High Speed VMC with 43,000 RPM, 30 Station ATC, BT 30 Spindle Taper, 3546 IPM RAPIDS !!

Used 2018 Hyundai Wia HD2200 with Chip Conveyor, Parts Catcher, Tailstock, Fanuc, Tool Presetter, 22" Machining Length !!!

2018 Hyundai Wia HD2200 with Chip Conveyor, Parts Catcher, Tailstock, Fanuc, Tool Presetter, 22" Machining Length !!!

Used 2007 Doosan DMV 3016Ld

2007 Doosan DMV 3016Ld

Used 2013 DMG Mori NHX-4000

2013 DMG Mori NHX-4000 with 1 Degree Pallet Indexing, 60 Station Tool Changer, Coolant Through the Spindle

Used 2005 Haas SL-30T

2005 Haas SL-30T

Used 2022 Okuma M560-V with 4th Axis Rotary Table, Coolant Through Spindle, Probe, Chip Conveyor

2022 Okuma Genos M560-V with 4th Axis Rotary Table, Coolant Through Spindle, Probe, Chip Conveyor

Used 2005 Okuma LH-55N/3000 with 12.99" Spindle Bore, Dual 24" Chucks, Chip Conveyor, Tailstock, Dual Turret Design

2005 Okuma LH-55N/3000 with 12.99" Spindle Bore, Dual 24" Chucks, Chip Conveyor, Tailstock, Dual Turret Design

Used 2017 OKK HMC-500 Full 4th Axis

2017 OKK HMC-500 with Full 4th Axis Table, 60 ATC, High Press. Cool. Thru Spindle, Tool & Part Probing, 15,000 RPM, CAT 40 Big Plus

Used 2012 Makino A51NX with Full 4th Axis, 14k RPM, Coolant Thru Spindle, 60 ATC, Chip Conveyor

2012 Makino A51NX with Full 4th Axis, 14k RPM, Coolant Thru Spindle, 60 ATC, Chip Conveyor

Used 2004 Mazak Nexus QTN 200 MY with Milling, Y Axis, Chip Conveyor, Tailstock, Tool Presetter, 8" Chuck, 2" Bar Capacity

2004 Mazak Nexus QTN 200 MY with Milling, Y Axis, Chip Conveyor, Tailstock, Tool Presetter, 8" Chuck, 2" Bar Capacity

Used 2001 Mori Seiki ZT2500Y

2001 Mori Seiki ZT2500Y

Used 2016 Okuma LB3000EXII-MYW 800 with Milling, Y Axis, Subspindle, OSP-P300LA Control

2016 Okuma LB3000EXII-MYW 800 with Milling, Y Axis, Subspindle, OSP-P300LA Control

Used 2010 Haas ST-30M

2010 Haas ST-30M with Milling, Servo Bar 300 Barfeed, Parts Catcher, Chip Conveyor, Tailstock

Used 2006 OKK HPS-500S

2006 OKK HPS-500S

Used 2006 OKK HPS-500S

2005 OKK HPS-500S

Used 2014 Haas VF-12/50 with 30 Pos. Side Mounted ATC, Wired for 4th Axis, High Pressure Coolant Thru Spindle

2014 Haas VF-12/50 with 30 Pos. Side Mounted ATC, Wired for 4th Axis, High Pressure Coolant Thru Spindle

Used 2001 Kingston CHK-3000 w/12.5" Bore

2001 Kingston CHK-3000 w/12.5" Bore

Used 2023 Haas ST-10 Chucker with Chip Conveyor, Tool Presetter, 6.5" Hyd Chuck, Under 200 Cut Hours

2023 Haas ST-10 Chucker with Chip Conveyor, Tool Presetter, 6.5" Hyd Chuck, Under 200 Cut Hours

Used 2022 Haas EC-1600ZT-5AX with Ext. Z travel, 4th Axis Table, 50 ATC, CAT 50, TSC, Renishaw Probing, ONLY 140 FEED CUT HOURS

2022 Haas EC-1600ZT-5AX with Ext. Z travel, 4th Axis Table, 50 ATC, CAT 50, TSC, Renishaw Probing, ONLY 140 FEED CUT HOURS

Used 1989 Kingston HJ-1700

1989 Kingston HJ-1700

Used 1996 Haas VF-2B with Haas HRT-210 4th Axis Rotary Table, Newer Spindle, Newer LCD Monitor and Lube System

1996 Haas VF-2B with Haas HRT-210 4th Axis Rotary Table, Newer Spindle, Newer LCD Monitor and Lube System

Used 1997 Wasino LG-7 CNC Gang Style Lathe with Auto Loader

1997 Wasino LG-7 CNC Gang Style Lathe with Auto Loader

Used 2006 Haas TM-1 w/ 4th Axis Drive, Coolant Syst., Single or Three Phase from Tech School

2006 Haas TM-1 w/ 4th Axis Drive, Coolant Syst., Single or Three Phase from Tech School

Used 2012 Haas VF-7/50 with Coolant Thru Spindle, Probing, CAT 50 Tpr, 4th Axis Drive, 7500 RPM

2012 Haas VF-7/50 with Coolant Thru Spindle, Probing, CAT 50 Tpr, 4th Axis Drive, 7500 RPM

Used 2001 Daewoo Puma 250B with 12" Hyd. Chuck, Chip Conveyor, Tool Presetter, Tailstock, ONLY 7848 Cutting Hours

1997 Daewoo Puma 250B with 12" Hyd. Chuck, Chip Conveyor, Tool Presetter, Tailstock, ONLY 7848 Cutting Hours

Used 2014 DMG Mori NTX2000-1500SZM Mill/Turn Center, Pendulum B Axis, Y Axis, Lower Turret Milling, 8" Chucks Both Spindles

2014 DMG Mori NTX2000-1500SZM Mill/Turn Center, Pendulum B Axis, Y Axis, Lower Turret Milling, 8" Chucks Both Spindles

Used 1994 Mazak QT35N/1000

1994 Mazak QT35N/1000, with 40" centers, 12" Hydraulic Chuck, Tailstock, Tool Presetter, Chip Conveyor, Mazatrol T32-2 Color Control

Used 1998 Mazak QT40/1500

1998 Mazak QT40/1500 with 60" centers, 15" Hydraulic Chuck, Tailstock, Tool Presetter, 3" Bar Capacity, Mazatrol TPlus Control

Used 2014 Haas TM-2P with Haas Probing Package, 6,000 RPM, Chip Auger, USB Port, 1841 Spindle Hours

2014 Haas TM-2P with Haas Probing Package, 6,000 RPM, Chip Auger, 1841 Spindle Hrs., Can be wire either single or three phase power

Used 2021 Hwacheon Hi-Tech 230BL YSMC w/ Milling, Y Axis, Subspindle, Chip Conv., Parts Catcher, 10" Chk 3.19" Bar Capacity

2021 Hwacheon Hi-Tech 230BL YSMC w/ Milling, Y Axis, Subspindle, Chip Conv., Parts Catcher, 10" Chk 3.19" Bar Capacity

Used 2006 Haas SL-20TAPL

2006 Haas SL-20TAPL, Auto Parts Loader, 5k rpm Spindle Option, Remote Jog Handle, Chip Auger

Used 2006 Romi M33 x 80" Oilfield Type Hollow Spindle Lathe with 10.5" Bore, Steady Rest, Chip Conveyor, Tailstock

2006 Romi M33 x 80" Oilfield Type Hollow Spindle Lathe with 10.5" Bore, Steady Rest, Chip Conveyor, Tailstock

Used 2014 Haas VF8/40 with Haas Probing Package (needs probe repaired), 24 Station Side Mount ATC, 8100 RPM, CAT 40

2014 Haas VF8/40 with Haas Probing Package (needs probe repaired), 24 Station Side Mount ATC, 8100 RPM, CAT 40

Used 2003 Romi M-170

Used 2011 Mazak Quick Turn Smart 100S

2011 Mazak Quick Turn Smart 100S

Used 2023 Haas ST-20Y with Haas Barfeed, Milling, Y Axis, Chip Conveyor, Tailstock, Low Hours

2023 Haas ST-20Y with Haas Barfeed, Milling, Y Axis, Chip Conveyor, Tailstock, Low Hours

Used 2007 Haas SL-20T with Tailstock, Tool Presetter, High Pressure Pump, Chip Conveyor, New Spindle !!

2007 Haas SL-20T with Tailstock, Tool Presetter, High Pressure Pump, Chip Conveyor, New Spindle !!

Used 2005 Haas EC-3000 3 Axis Horizontal Machining Center with Coolant Thru Spindle, 30 ATC, Geared Head, 6000 RPM, CAT 50

2005 Haas EC-3000 3 Axis Horizontal Machining Center with Coolant Thru Spindle, 30 ATC, Geared Head, 6000 RPM, CAT 50

Used 2012 Haas TM-1P

2012 Haas TM-1P with 10 Station Tool Changer, Coolant, USB, Can be wired either single or three phase power

Used 2015 Milltronics ML16/40

2015 Milltronics ML16/40 8-Station Turret

Used 2012 Mori Seiki NHX4000 with Full 4th Axis Rotary Tbl. 1000 PSI CTS, Tool Probing, 60 Station Tool Changer

2012 Mori Seiki NHX4000 with Full 4th Axis Rotary Tbl. 1000 PSI CTS, Tool Probing, 60 Station Tool Changer

Used 2007 Mori Seiki NT-4300/1500S w/ B Axis Pend. Head, C Axis-Both Spndls., Milling, Y Axis, 240 ATC, (2) 12" Chks, 3.5" Bar Cap

2007 Mori Seiki NT-4300/1500S w/ B Axis Pend. Head, C Axis-Both Spndls., Milling, Y Axis, 240 ATC, (2) 12" Chks, 3.5" Bar Cap

Used 1998 Mazak VTC16B with Yuasa Indexer, Chip Conveyor, Auto Tool Length Measurement Probe, Making Parts

1998 Mazak VTC16B with Yuasa Indexer, Chip Conveyor, Auto Tool Length Measurement Probe, Making Parts

Used 2008 Mazak Variaxis 500-5X II with Pallet Changer, Trunnion Style 5 Axis Design, HSK-63A Taper, 25,000 RPM, 120 ATC, CTS

2008 Mazak Variaxis 500-5X II with Pallet Changer, Trunnion Style 5 Axis Design, HSK-63A Taper, 25,000 RPM, 120 ATC, CTS

Used 2020 DMTC CGK5112JD 2 Axis CNC VTL with 8 Station ATC, 40" 4 Jaw Manual Chk, Fanuc 0i-TF Plus Control, 47.2" Swing

2020 DMTC CGK5112JD 2 Axis CNC VTL with 8 Station ATC, 40" 4 Jaw Manual Chk, Fanuc 0i-TF Plus Control, 47.2" Swing

Used 1990 HEM H75A

Used 2009 You Ji VTL 1000ATC

2009 You Ji VTL 1000ATC

Used 2015 Haas VF1 with 10,000 RPM, 24 Station Side Mounted ATC, Chip Auger, Extended Memory, Remote Jog Handle

2015 Haas VF1 with 10,000 RPM, 24 Station Side Mounted ATC, Chip Auger, Extended Memory, Remote Jog Handle

Used 2022 Haas ST-25 Chucker w/ Haas Barfeed with Liners, Tool Presetter, Chip Conveyor, 10" Hydraulic Chuck, Parts Catcher

2021 Haas ST-25 Chucker w/ Haas Barfeed with Liners, Tool Presetter, Chip Conveyor, 10" Hydraulic Chuck, Parts Catcher

Used 1987 Mazak YMS H40Q with 2 Plt. Changer, Full 4th Rotary Tbl, 40 Pos. ATC, 5.1" Spindle Diam, Right Angle Head, 5 Face Machining

1987 Mazak YMS H40Q with 2 Plt. Changer, Full 4th Rotary Tbl, 40 Pos. ATC, 5.1" Spindle Diam, Right Angle Head, 5 Face Machining

Used 2018 Mazak VC-500A-5X with 5 Axis Machining, 2 Pallet Changer, 60 Pos. ATC, Coolant Thru Spindle, Tool & Part Probing

2018 Mazak VC-500A-5X with 5 Axis Machining, 2 Pallet Changer, 60 Pos. ATC, Coolant Thru Spindle, Tool & Part Probing

Used 2014 Haas VF-9/40 with T

2014 Haas VF-9/40 with Haas TR-310 Trunnion Table, Coolant Through Spindle, Extended Z Clearance, High Speed Machining

Used 2012 Victor Taichung VTurn 46 Heavy Duty CNC Lathe with 32" sw, 69" cc, 4.52" Bar Capacity, 68 HP, 15" Chuck, 4 Spd Gearbox

2012 Victor Taichung VTurn 46 Heavy Duty CNC Lathe with 32" sw, 69" cc, 4.52" Bar Capacity, 68 HP, 15" Chuck, 4 Spd Gearbox

Used 2012 Victor Taichung VTurn 46 Heavy Duty CNC Lathe with 32" sw, 69" cc, 4.52" Bar Capacity, 68 HP, 15" Chuck, 4 Spd Gearbox

2012 Victor Taichung VTurn 46 Heavy Duty CNC Lathe with 32" sw, 69" cc, 4.52" Bar Capacity, 68 HP, 15" Chuck, 4 Spd Gearbox

Used 2007 Mazak Variaxis 500-5X II with 5 Axis Trunnion Table, 40 Pos. ATC, HSK63 Taper, 12,000 RPM, HP CTS, Renishaw OMP Probe

2007 Mazak Variaxis 500-5X II with 5 Axis Trunnion Table, 40 Pos. ATC, HSK63 Taper, 12,000 RPM, HP CTS, Renishaw OMP Probe

Used 2006 Haas TL-3 with Tailstock, 12" Chuck, Fully Enclosure, Coolant Tank/Pump, Just 4741 Spindle Hours !!

2006 Haas TL-3 with Tailstock, 12" Chuck, Fully Enclosure, Coolant Tank/Pump, Just 4741 Spindle Hours !!

Used 2011 Haas ST-30M Chucker with Haas Barfeed, Chip Conveyor, Parts Catcher, Live Tooling, 3" Bar Cap., 10" Chuck, (5) Live Holders

2011 Haas ST-30M Chucker with Haas Barfeed, Chip Conveyor, Parts Catcher, Live Tooling, 3" Bar Cap., 10" Chuck, (5) Live Holders

Used 2006 Mazak Nexus QTN 250 MSY with Live Milling, Subspindle, Y Axis, Barfeed, Parts Catcher, Chip Conveyor, Hydraulic Chucks

2006 Mazak Nexus QTN 250 MSY with Live Milling, Subspindle, Y Axis, Barfeed, Parts Catcher, Chip Conveyor, Hydraulic Chucks

Used 2005 Haas TL-3

Used 2002 Mazak Integrex 300-IIY/1000

2002 Mazak Integrex 300-IIY/1000

Used 2012 Mazak Nexus QTN 450-II/1000 with 6.5" Bar Capacity, Chip Conveyor, Tailstock, Toolsetter, 40" centers, 50 HP

2012 Mazak Nexus QTN 450-II/1000 with 6.5" Bar Capacity, Chip Conveyor, Tailstock, Toolsetter, 40" centers, 50 HP

Used 2015 Ganesh GT-3080CNC BB with 10" Spindle Bore

2015 Ganesh GT-3080CNC BB with 10" Spindle Bore

Used 2016 Haas UMC-750SS with Midaco 19 Pallet Changer System, Coolant Through Spindle, 15,000 RPM, Probing, 40 Position ATC

2016 Haas UMC-750SS with Midaco 19 Pallet Changer System, Coolant Through Spindle, 15,000 RPM, Probing, 30 Position ATC

Used 2002 Fadal VMC6535-50 32MP Control, Rigid Tapping, Cool Power, Remote Jog Handle, Chip Conveyor, Expanded Memory

2002 Fadal VMC6535-50 32MP Control, Rigid Tapping, Cool Power, Remote Jog Handle, Chip Conveyor, Expanded Memory

Used 2005 Mazak Nexus QTN 300/1200 with Chip Conv., 3" Bar Cap., 10" Chk, Tailstock, Tool Presetter, Fusion 640T Nexus Control

2005 Mazak Nexus QTN 300/1200 with Chip Conv., 3" Bar Cap., 10" Chk, Tailstock, Tool Presetter, Fusion 640T Nexus Control

Used 2007 Milltronics VMD-30/100 Series C

2007 Milltronics VMD-30

Used 2012 YCM DCV 4025B Bridge Mill with Coolant Through the Spindle, 160"x98"x40", 120 ATC, Conveyor, Hi Spd Machining

2012 YCM DCV 4025B Bridge Mill with Coolant Through the Spindle, 160"x98"x40", 120 ATC, Conveyor, Hi Spd Machining

Used 2019 Doosan Puma TT1300SY Twin Spindle/Twin Turret, Y Axis Mill Turn Lathe, Barfeed, Parts Conveyor,

2019 Doosan Puma TT1300SY Twin Spindle/Twin Turret, Y Axis, Mill Turn Lathe, Barfeed, Parts Conveyor, Collet Chks, 1.81" Bar Cap.

Used 2007 OKK KCV-800

2007 OKK KCV-800 with High Pressure CTS, 40 Station ATC, Conveyor, 12,000 RPM, CAT 50, Spindle Chiller, 120"x33"x28" Travels

Used 2013 Mazak Nexus QTN 450-II/3000 with 7.28" Bar Capacity, 120" Center, SMW Front Air Chuck, LNS Hyd. Steady Rest, Rear Chuck Prepped

2013 Mazak Nexus QTN 450-II/3000 with 7.28" Bar Capacity, 120" Center, SMW Front Air Chuck, LNS Hyd. Steady Rest, Rear Chuck Prepped

Used 2010 Haas VF2SS with 24 Station SMATC, 12,000 RPM, Remote Jog Handle, USB Port Interface, High Intensity Lighting

2010 Haas VF2SS with 24 Station SMATC, 12,000 RPM, Remote Jog Handle, USB Port Interface, High Intensity Lighting

Used 2014 SMTCL EGC 2040 Bridge Style with 157"x78"x39" Travels, 50 Taper, 6000 RPM, 40 ATC, Fanuc 0i-MD Control

2014 SMTCL EGC 2040 Bridge Style with 157"x78"x39" Travels, 50 Taper, 6000 RPM, 40 ATC, Fanuc 0i-MD Control

Used 2015 Visionwide NF-3226 Bridge Style VMC with Tool & Part Probing, 1000 PSI TSC, Chip Conveyor, Chiller Unit

2015 Visionwide NF-3226 Bridge Style VMC with Tool & Part Probing, 1000 PSI TSC, Chip Conveyor, Chiller Unit

Used 2013 Southwestern Industries Trak TRL 1630SX with Prototrak SLX Control, Tailstock, Tool Post, 10" 3 Jaw Chuck, Coolant

2013 Southwestern Industries Trak TRL 1630SX with Prototrak SLX Control, Tailstock, Tool Post, 10" 3 Jaw Chuck, Coolant

Used 2011 Haas EC-500, 40 Pos. ATC, 1000 PSI Coolant Thru Spindle, Haas Probing, 1 Degree Pallet Indexing, 2 Pallet Changer

2011 Haas EC-500, 40 Pos. ATC, 1000 PSI Coolant Thru Spindle, Haas Probing, 1 Degree Pallet Indexing, 2 Pallet Changer

Used 2012 Haas EC-500 with 40 Pos. ATC, 1000 PSI Coolant Thru Spindle, Haas Probing Package, 1 Deg Pallet Index, 2 Pallet Changer

2012 Haas EC-500 with 40 Pos. ATC, 1000 PSI Coolant Thru Spindle, Haas Probing Package, 1 Deg Pallet Index, 2 Pallet Changer

Used 2007 Haas Mini Mill with 10 Station Tool Changer, Coolant, Can Use Either Single or Three Phase Power, 6794 Run Time Hours

2007 Haas Mini Mill with 10 Station Tool Changer, Coolant, Can Use Either Single or Three Phase Power, 6794 Run Time Hours

Used 2004 Milltronics RH33

2004 Milltronics RH33

Used 2006 Visionwide VTEC VF-4000 Bridge Style VMC, 165"x90"x40", CAT50, 6000 RPM, 40 ATC, New Spindle in 2024

2006 Visionwide VTEC VF-4000 Bridge Style VMC, 165"x90"x40", CAT50, 6000 RPM, 40 ATC, New Spindle in 2024

Used 2006 Haas VM-2 with Haas HRT210 4th Axis Table, Prog. Coolant, Remote Jog Handle, 24 Station Side Mount ATC, High Spd Machining

2006 Haas VM-2 with Haas HRT210 4th Axis Table, Prog. Coolant, Remote Jog Handle, 24 Station Side Mount ATC, High Spd Machining

Used 2015 OKK HMC-500 with Full 4th Axis, 60 Station Tool Changer, CAT40 Big Plus Spindle, High Press. Coolant Thru Spindle

2015 OKK HMC-500 with Full 4th Axis, 60 Station Tool Changer, CAT40 Big Plus Spindle, High Press. Coolant Thru Spindle

Used 2012 Hyundai-Kia SKT250TTSY Fanuc 18i-TB

2008 Hyundai-Kia SKT200TTSY with Twin Turrets, Twin Spindles, Live Tooling, Y Axis, 2.56" Bar Capacity, Chip Conveyor

Used 1998 Behringer HBP-530A Automatic Horizontal Bandsaw w/ 20.8" Round Cutting Cap., Feeder Tables

1998 Behringer HBP-530A Automatic Horizontal Bandsaw w/ 20.8" Round Cutting Cap., Feeder Tables

Used 2002 Milltronics ML14

2002 Milltronics ML-15

Used 2002 Milltronics RW12

2002 Milltronics RW12

Used 1989 Quincy Model EE-5120 Electric Reciprocating Air Compressor

1989 Quincy Model EE-5120 Electric Reciprocating Air Compressor

Used 2013 Brown & Sharpe Global Advantage 555 CMM

2013 Brown & Sharpe Global Advantage 555 CMM

Used 2022 Tormach 1100M with Microarc 4th axis Rotary Table (never used), 10 Station ATC, Subplate, Tool Setter, Digital Passive Probe

2022 Tormach 1100M w/ Premium Package, Microarc 4th axis Table (never used), 10 Station ATC, Tool Setter, Digital Passive Probe

Used 1965 Bridgeport Series I with a Proto Trak SMX Control

1980 Bridgeport Series I with a Proto Trak SMX Control

Used 1996 Mazak V414/32

2000 Mazak Mazatech V414/32 with 24 Station Side Mounted ATC, Tool Length Measurement Probe, Rigid Tapping

Used 1993 Mazak Super Turbo-X510 HI-PRO-SC 2000 Watt Laser L Plus

1993 Mazak Super Turbo-X510 HI-PRO-SC 2000 Watt Laser

Used 2018 Haas Mini Mill

2018 Haas Mini Mill

Used 2019 Haas TM-1P with Haas Probing, Prog. Coolant, 10 ATC, ONLY 564 Feed Cut Hours. Very Nice Condition

2019 Haas TM-1P with Haas Probing, Prog. Coolant, 10 ATC, ONLY 564 Feed Cut Hours. Very Nice Condition

Used 2021 Haas UMC-500SS 5 Axis Universal Machining Center with Coolant Thru Spindle, Probing, HSM, Conveyor, 50 Station ATC

2021 Haas UMC-500SS 5 Axis Universal Machining Center with Coolant Thru Spindle, Probing, HSM, Conveyor, 50 Station ATC

Used 2013 Hwacheon T2-2T with Twin Spindle, Twing Turrets, Live Milling/Drilling, Parts Catcher & Conveyor, Chip Conveyor, Fanuc 0i-TD

2013 Hwacheon T2-2T with Twin Spindle, Twing Turrets, Live Milling/Drilling, Parts Catcher & Conveyor, Chip Conveyor, Fanuc 0i-TD

Used 2011 Mori Seiki NL2500/1250 with Tailstock, Tool Presetter, 12" Hyd Chuck, Chip Conveyor

2011 Mori Seiki NL2500/1250 with Tailstock, Tool Presetter, 12" Hyd Chuck, Chip Conveyor

Used 2023 DN Solutions Puma 4100LB

2023 DN Solutions Puma 4100LB

Used 2023 Haas ST-10 Chucker with Chip Conveyor, Tool Presetter, 6.5" Hyd Chuck, Under 200 Cut Hours

2023 Haas ST-10 Chucker (not tailstock), Tool Eye, Chip Conveyor, Rigid Tapping

Used 2022 Haas UMC-500 with 15,000 RPM Spindle, Coolant Thru Spindle, Haas Probing, 30 Station ATC, High Speed Machining

2022 Haas UMC-500 with 15,000 RPM Spindle, Coolant Thru Spindle, Haas Probing, 30 Station ATC, High Speed Machining

Used 2009 Mazak Nexus QTN 250-II/1500 with RARE 60" centers, Tailstock, Chip Conveyor, Toolsetter, 10" Chuck, 3" Bar Capacity

2009 Mazak Nexus QTN 250-II/1500 with RARE 60" centers, Tailstock, Chip Conveyor, Toolsetter, 10" Chuck, 3" Bar Capacity

Used 2007 Atrump RL-3040 CNC Wheel Repair Lathe, Upgraded Lenco Operating Syst in 2015, 30" x 40", 10 HP, 2200 RPM, Geared

2007 Atrump RL-3040 CNC Wheel Repair Lathe, Upgraded Lenco Operating Syst in 2015, 30" x 40", 10 HP, 2200 RPM, Geared

Used 2015 Doosan Lynx 220LC with 8" Hyd Chuck, Toolsetter, Tailstock, Parts Catcher, Chip Converyor, Barfeed Interface ONLY

2015 Doosan Lynx 220LC with 8" Hyd Chuck, Toolsetter, Tailstock, Parts Catcher, Chip Converyor, Barfeed Interface ONLY

Used 2013 Lenco M210 Wheel Turning Lathe with Chuck, Single Phase Power, Maintenanced in 2024

2013 Lenco M210 Wheel Turning Lathe with Chuck, Single Phase Power, Maintenanced in 2024

Used 2024 Haas EC-400 PP

2024 Haas EC-400 PP 6-Pallets, WIPS Renishaw Tool & Part Probe, Remote Jog Handle, Coolant Thru the Spindle, Full 4th Axis, Chip Conveyor

Used 2009 VTEC VF-4000 Double Column Style Bridge Mill with 40 ATC, Coolant Thru Spindle, 6000 RPM, CAT50, 165"x90"x36"

2009 Visionwide VTEC VF-4000 Double Column Style Bridge Mill with 40 ATC, Coolant Thru Spindle, 6000 RPM, CAT50, 165"x90"x36"

Used 2014 Mazak Vortex e-1060V/8 Heavy Duty 5 Axis Milling Machine with Built in Rotary Table, Tilting B Axis Head, HPC, 120 Pos. ATC

2014 Mazak Vortex e-1060V/8 Heavy Duty 5 Axis Milling Machine with Built in Rotary Table, Tilting B Axis Head, HPC, 120 Pos. ATC

Used 2019 Haas EC-1600ZT with Extended Z Axis Travel, 7500 RPM, Integrated 4th Axis Platter, TSC, Renishaw Probing, 30 ATC

2019 Haas EC-1600ZT with Extended Z Axis Travel, 7500 RPM, Integrated 4th Axis Platter, TSC, Renishaw Probing, 30 ATC

Used 2006 Mazak Nexus QTN 100-II M with Full C Axis Milling, Chip Conveyor, LNS Short Barfeed, Parts Catcher, Tailstock, Tool Eye

2006 Mazak Nexus QTN 100-II M with Full C Axis Milling, Chip Conveyor, LNS Short Barfeed, Parts Catcher, Tailstock, Tool Eye

Used 2004 Mazak Nexus QTN 200 M

2004 Mazak Nexus QTN 200 M with Live Milling, LNS Barfeed, Parts Catcher, Rear Chip Conveyor, Spindle Liners, Live Holders

Used 2000 Mazak SQT100MSY with Milling, Y Axis, Subspindle, LNS Servo S2 Barfeed, Chip Conveyor, Parts Catcher, Tooling

2000 Mazak SQT100MSY with Milling, Y Axis, Subspindle, LNS Servo S2 Barfeed, Chip Conveyor, Parts Catcher, Tooling

Used 2008 Haas SL-20T with Tailstock, 8" Hyd Chuck, Tool Presetter, Parts Catcher, Chip Auger, 2" Bar Cap., Cold Fire II Processor

2008 Haas SL-20T with Tailstock, 8" Hyd Chuck, Tool Presetter, Parts Catcher, Chip Auger, 2" Bar Cap., Cold Fire II Processor

Used 2014 Haas ST-35

2014 Haas ST-35 with 15" Chuck, 4" Bar Cap., Tailstock, Chip Conveyor, Tool Presetter, Hi Press Cool.

Used 2012 Haas VF-3YT/40 with Coolant Thru Spindle, Haas Probing, 40 Station SMATC, Auger, Pcool

2012 Haas VF-3YT/40 with Coolant Thru Spindle, Haas Probing, 40 Station SMATC, Auger, Pcool

Used 2007 Mori Seiki NL2500MC/700 with 3" Bar Cap., Chip Conveyor, Tailstock, Tool Presetter, Bar Feeder, Parts Exit Conveyor

2007 Mori Seiki NL2500MC/700 with 3" Bar Cap., Chip Conveyor, Tailstock, Tool Presetter, Bar Feeder, Parts Exit Conveyor

Used 2008 Haas Mini Mill

2008 Haas Mini Mill

Used 2006 Haas VF-2D

2006 Haas VF-2D WIPS Renishaw Tool & Part Probe, Wired for 4th Axis, Macros, Programmable Coolant, 10k rpm Spindle, High-Speed Machining

Used 2007 Southwestern Industries TRAK TRL 1840V

1999 Southwestern Industries TRAK TRL 1840V

Used 2008 Haas SL-20T with Milling, Full C Axis, Tailstock, 8.3" Chuck, Chip Auger, 12 Pos. Turret, 2" Bar Capacity

2008 Haas SL-20T with Milling, Full C Axis, Tailstock, 8.3" Chuck, Chip Auger, 12 Pos. Turret, 2" Bar Capacity

Used 2002 Romi M27 x 120" with 4" Bar Capacity, Tailstock, 15" Chuck, 8 Station Turret, Chip Conveyor

2002 Romi M27 x 120" with 4" Bar Capacity, Tailstock, 15" Chuck, 8 Station Turret, Chip Conveyor

Used 2005 Okuma Captain L470M with C Axis, Milling Capability, 12" Hyd. Chuck, Tailstock, Tool Presetter, Chip Conveyor

2005 Okuma Captain L470M with C Axis, Milling Capability, 12" Hyd. Chuck, Tailstock, Tool Presetter, Chip Conveyor

Used 2007 Fadal VMC8030D-3HT with 24 Pos. Side Mounted ATC, Fanuc Cntrl, 80"x30"x30" travels, Absolute Positioning, 10,000 RPM

2007 Fadal VMC8030D-3HT with 24 Pos. Side Mounted ATC, Fanuc Cntrl, 80"x30"x30" travels, Absolute Positioning, 10,000 RPM

Used 2022 Haas ST-10 Chucker, Tool Presetter, Chip Conveyor, Rigid Tapping 1GB Program Memory **Only 121 Run Time Hours**

2022 Haas ST-10 Chucker, Tool Presetter, Chip Conveyor, Rigid Tap, 6.5" Hyd Chk, Royal Collet Chk, **Only 121 Run Time Hours**

Used 2021 Haas UMC-500 5 Axis Universal Machining Center with Coolant Thru Spindle, Probing, 10k RPM

2021 Haas UMC-500 5 Axis Universal Machining Center with Coolant Thru Spindle, Probing, 10k RPM

Used 2008 Weiler E90/2000

2008 Weiler E90/2000 with 14" Bar Capacity, (2) 31" 4 Jaw Chucks, 80" cc, Chip Conveyor, Tailstock, Steady Rest, Weiler Control

Used 2015 Doosan Lynx 220LMA

2015 Doosan Lynx 220LMA

Used 2018 Haas VF-11/40, WIPS Renishaw Tool & Part Probe, Remote Jog Handle, 1000 psi Coolant thru the Spindle, 12k rpm, HRT-310 Rotary Table

2018 Haas VF-11/40, WIPS Renishaw Tool & Part Probe, Remote Jog Handle, 1000 psi Coolant thru the Spindle, 12k rpm,

Used 2023 DoAll Model DS-600SA Dual-Miter Semi-Automatic Horizontal Band Saw

2023 DoAll Model DS-600SA Dual-Miter Semi-Automatic Horizontal Band Saw

Used 2003 Mori Seiki SL-154SY

2003 Mori Seiki SL-154SY with Milling, Y Axis, Subspindle, Barfeed, Tooling, VERY NICE CONDITION !!!

Used 2005 Mazak Nexus VCN-410A with Coolant Thru Spindle, Chip Conveyor, 30 Station Side Mounted ATC, 12,000 RPM

2005 Mazak Nexus VCN-410A with Coolant Thru Spindle, Chip Conveyor, 30 Station Side Mounted ATC, 12,000 RPM

Used 1997 Haas VF-9/40

1997 Haas VF-9/40 with Tool Probe, Chip Auger, Programmable Coolant, Remote Jog Handle

Used 2012 Southwestern Industries TRAK TRL 1845SX

2012 Southwestern Industries TRAK TRL 1845SX

Used 2010 Edge Technologies FMB MiniMag 20/3800 A/D Barfeed, .078" - .787" Diameter, Up to 12' 5" Length

2010 Edge Technologies FMB MiniMag 20/3800 A/D Barfeed, .078" - .787" Diameter, Up to 12' 5" Length

Used 2010 Mazak VTC800E/30-SR

2010 Mazak VTC800E/30-SR 5 Axis with Pendulum B Axis Head, 4th Axis Prep, 120" X Axis, 48 Pos. ATC, Chip Conv., Rotary Tbl Avail. at Add'l Cost

Used 2013 Mazak Nexus VCN 700E/40-II

2013 Mazak Nexus VCN 700E/40-II with 4th Axis Prepped, 12,000 RPM, 48 Station ATC, Chip Conveyor, Rotary Table Avail at Additional Cost

Used 2011 Miyano DNA-42 DHY, Twin Turret Design, Twin Spindles, Y Axis on Upper Turret, Milling Capability, Barfeed, Chip Conveyor

2011 Miyano DNA-42 DHY, Twin Turret Design, Twin Spindles, Y Axis on Upper Turret, Milling Capability, Barfeed, Chip Conveyor

Used 2012 Omax 80160 Water Jet Cutting Machine with 50 HP Enduromax Pump, 60,000 PSI Cut Pressure, Solid Removal Syste

2012 Omax 80160 Water Jet Cutting Machine with 50 HP Enduromax Pump, 60,000 PSI Cut Pressure, Solid Removal Syste

Used 2007 Mazak Integrex 400-IV/1500, 40 atc, Chip Conveyor, Tooling

2007 Mazak Integrex 400-IV/1500 Turn Mill Center w/ C Axis, Y Axis, Tailstock, 60" cc, 15" Chk, 4" Bar Cap., 40 ATC, Chip Conv., Tooling

Used 2012 Mazak QTN 450MY-II

2012 Mazak QTN 450MY-II/3000 with Full C Axis Milling, Y Axis Capability, 120" Centers, 7.3" Bar Cap, 18" Air Chuck, Hyd S/R

Used Scothman 9012-24M 90 Ton Iron Worker2004

Scotchman 9012-24M 90 Ton Iron Worker

Used 1983 Mori Seiki SL-3A with Fanuc 6TB Control, 10" 3 Jaw Hyd Chuck, Tailstock, Under Power Holding Tolerance

1983 Mori Seiki SL-3A with Fanuc 6TB Control, 10" 3 Jaw Hyd Chuck, Tailstock, Under Power Holding Tolerance

Used 2005 Haas HRT210 with Tailstock, Brush Type

2005 Haas HRT210 with Tailstock, Brush Type

Used 2012 Chevalier FBL-530C with 12.59" Bore, 32" 4 Jaw Manual Front Chk, 28" Rear Air Chk, Tailstock, 118" cc, 500 RPM, Conveyor

2012 Chevalier FBL-530C with 12.59" Bore, 32" 4 Jaw Manual Front Chk, 28" Rear Air Chk, Tailstock, 118" cc, 500 RPM, Conveyor

Used 2005 Sheffield Endeavor 9.9.7 Coordinate Measuring Machine

2005 Sheffield Endeavor 9.9.7 Coordinate Measuring Machine

Used 2014 Weiler E50/2000

2014 Weiler E50/2000

Used 2000 Mazak VTC200B with Chip Conveyor, 30 Station Side Mounted Tool Changer, Very Nice Condition, Located in Ontario, Canada

2000 Mazak VTC200B with Chip Conveyor, 30 Station Side Mounted Tool Changer, Very Nice Condition, Located in Ontario, Canada

Used 2002 Charmilles Robofil 240 CNC Wire EDM

2002 Charmilles Robofil 240 CNC Wire EDM

Used 2015 Omax Maxiem Water Jet Cutting Machine with 30 HP Pump, 50,000 PSI Cut Pressure, 600 lb. Bulk Abrasive Delivery System

2015 Omax Maxiem Water Jet Cutting Machine with 30 HP Pump, 50,000 PSI Cut Pressure, 600 lb. Bulk Abrasive Delivery System

Used 2013 Romi C-510 Combination Teach Type CNC Lathe, 10" Chuck, 2.6" Bar Cap., 60" cc, Tool Post, Tailstock, Hand Wheels

2013 Romi C-510 Combination Teach Type CNC Lathe, 10" Chuck, 2.6" Bar Cap., 60" cc, Tool Post, Tailstock, Hand Wheels

Used 1982 Shizuoka Millmaster B-5V

1985 Shizuoka Millmaster B-5V

Used 2022 DMC DL22LA

2022 DMC DL22LA with 8" Hyd Chk, 2" Bar Capacity, Tailstock, Chip Conveyor, Parts Catcher

Used 2005 Awea BM-1600 with Chip Conveyor, 24 Station Side Mount ATC, RJH, Boxed Ways, Fanuc Control

2005 Awea BM-1600 with Chip Conveyor, 24 Station Side Mount ATC, RJH, Boxed Ways, Fanuc Control

Used 2004 Takumi V-22 with Coolant Thru Spindle, Conveyor, 24 Pos. Side Mount ATC, RJH, Boxed Ways, Fanuc Control

2004 Takumi V-22 with Coolant Thru Spindle, Conveyor, 24 Pos. Side Mount ATC, RJH, Boxed Ways, Fanuc Control

Used 2017 Haas ST-15 with Tool Presetter, Tailstock, 8" Chuck, Chip Conveyor, A/C for Cabinet, 12"x16" Capacity, 5500 Spindle Hours

2017 Haas ST-15 with Tool Presetter, Tailstock, 8" Chuck, Chip Conveyor, A/C for Cabinet, 12"x16" Capacity, 5500 Spindle Hours

Used 2015 Fryer MC-30 with

2015 Fryer MC-30 with Remote Jog Handle, NO coolant system, NO Tool Changer

Used 1997 Hitachi Seiki Hi-Cell 40

1997 Hitachi Seiki Hi-Cell 40, 90 Station ATC, 15" Hyd Chuck, 4" Bar Cap., Tool Presetter, Chip Conveyor, Aprx 150 Tool Holders

Used 2014 Southwestern Industries Trak TRL 1630SX with Prototrak SLX Control, Tailstock, Toolpost, 8" 3 Jaw Chuck, Coolant System

2014 Southwestern Industries Trak TRL 1630SX with Prototrak SLX Control, Tailstock, Toolpost, 8" 3 Jaw Chuck, Coolant System

Used 26 Haas EC-1600-4X with 5 Axis Capability, Built In 4th Table, Removable 5th Axis Rotary Table, 50 ATC, Probing, Cool. Thru Spindle

2006 Haas EC-1600-4X with 5 Axis Capability, Built In 4th Table, Removable 5th Axis Rotary Table, 50 ATC, Probing, Cool. Thru Spindle

Used 2007 Haas SL-40T with Tailstock, Chip Conveyor, 15" Hydraulic Chuck, 4" Bar Capacity, Tool Presetter, Aux Coolant Filter

2007 Haas SL-40T with Tailstock, Chip Conveyor, 15" Hydraulic Chuck, 4" Bar Capacity, Tool Presetter, Aux Coolant Filter

Used 2012 Haas ST-20 with Tailstock, Chip Conveyor, Tool Presetter, Part Probing, 8.3" Chuck, 12 Station BOT Turret, Recently Rebuilt

2012 Haas ST-20 with Tailstock, Chip Conveyor, Tool Presetter, Part Probing, 8.3" Chuck, 12 Station BOT Turret, Recently Rebuilt

Used 2015 Fanuc Robodrill Alpha-D21LiA5 with 2 Pallet Changer, 24,000 RPM Spindle, 21 Pos. ATC, Tool Probe, ONLY 755 CUT HOURS !!

2015 Fanuc Robodrill Alpha-D21LiA5 with 2 Pallet Changer, 24,000 RPM Spindle, 21 Pos. ATC, Tool Probe, ONLY 755 CUT HOURS !!

Used 2007 Mazak Nexus QTN 450-II/1000 Big Bore with Chip Conveyor, 18" Air Chuck, 7" Bar Cap., Tailstock, Prep for Rear Chuck, EIA Programming

2007 Mazak Nexus QTN 450-II/1000 Big Bore with Chip Conveyor, 18" Air Chuck, 7" Bar Cap., Tailstock, Prep for Rear Chuck, EIA Programming

Used 2011 Haas VF4D with Progr. Coolant, Chip Auger, Direct Drive, 8100 RPM, CAT 40, USB Port, From a Tech School - ONLY 1942 Power On Hours

2011 Haas VF4D with Progr. Coolant, Direct Drive, 8100 RPM, CAT 40, USB Port, From a Tech School - ONLY 1942 Power On Hours

Used 2001 Mori Seiki ZT2500Y

2001 Mori Seiki ZT2500Y

Used 2005 Fanuc Robodrill Alpha T-21iDL w/ Pallet Changer, 10,000 RPM, 21 Station ATC, Fanuc 16iMB, 2834 Run Hours

2005 Fanuc Robodrill Alpha T-21iDL w/ Pallet Changer, 10,000 RPM, 21 Station ATC, Fanuc 16iMB, 2834 Run Hours

Used 2010 Haas TL-2 Full Enclosure, Tailstock, Tool Post, 10" Chuck, Only 177 Feed Cut Hours

2010 Haas TL-2 with 3" Bore, Full Enclosure, Tailstock, Tool Post, 10" Chuck, Only 177 Feed Cut Hours

Used 2010 Haas VF-3 with Haas Probing, Programmable Coolant, Chip Auger, High-Intensity Lighting, Only 448 Feed Cut Hours

2010 Haas VF-3 with Haas Probing, Programmable Coolant, Chip Auger, High-Intensity Lighting, Only 448 Feed Cut Hours

Used 2012 Doosan Puma TT1800SY

2012 Doosan Puma TT1800SY, LNS S2 Barfeed, LNS Blaze Air Unloader, Tool Presetter, Parts Catcher High Pressue Chip Blaster Coolant System

Used 2004 LNS Quick Load Servo S3 Barfeeder

2004 LNS Quick Load Servo S3 Barfeeder

Used 2014 Haas ST-40 with Tailstock, Chip Conveyor, 15" Hydraulic Chuck, Tool Presetter, Remote Jog Handle, 3,278 Feed Cut Hours

2014 Haas ST-40 with Tailstock, Chip Conveyor, 15" Hydraulic Chuck, Tool Presetter, Remote Jog Handle, 3,278 Feed Cut Hours

Used 2017 Haas VF2 with Chip Auger, Rigid Tapping, 8100 RPM, 20 Station Umbrella ATC, ONLY 3,429 Feed Cutting Hours !!

2017 Haas VF2 with Chip Auger, Rigid Tapping, 8100 RPM, 20 Station Umbrella ATC, ONLY 3,429 Feed Cutting Hours !!

Used 2013 Edge Technologies Patriot 338 Barfeed

2013 Edge Technologies Patriot 338 Barfeed

Used 2013 Haas VF2 with Haas/Renishaw Probing, 4th Axis Drive & Wiring, Prepped for Coolant Thru Spindle, Chip Auger

2013 Haas VF2 with Haas/Renishaw Probing, 4th Axis Drive & Wiring, Prepped for Coolant Thru Spindle, Chip Auger

Used 2007 Mazak Nexus QTN 250-II with Tailstock, Tool Presetter, Chip Conveyor, 10" Chuck, 3" Bar Capacity,

2007 Mazak Nexus QTN 250-II with Tailstock, Tool Presetter, Chip Conveyor, 10" Chuck, 3" Bar Capacity,

Used 2021 Bodor Model P3015T6 3 KW IPG Laser Cutting Machine with Tube Cutter

2021 Bodor Model P3015T6 3 KW IPG Laser Cutting Machine with Tube Cutter

Used 2019 Haas EC-1600ZT with Extended Z Axis Travel, 7500 RPM, Integrated 4th Axis Platter, TSC, Renishaw Probing, 30 ATC

2019 Haas EC-1600ZT with Extended Z Axis Travel, 7500 RPM, Integrated 4th Axis Platter, TSC, Renishaw Probing, 30 ATC

Used 2022 Haas HRT310 NEW-NEVER USED with 2 Multi Pin Cable Connections, 9" Manual Tailstock, Adapter Plate for Tooling Block

2022 Haas HRT310 NEW-NEVER USED with 2 Multi Pin Cable Connections, 9" Manual Tailstock, Adapter Plate for Tooling Block

Used 2011 You-Ji YV1200 ATC

2011 You-Ji YV1200 ATC Remote Jog Handle, Chip Conveyor

Used 2016 Haas UMC-750 with Haas Probing, 30 Station Tool Changer, ONLY 500 Cutting Hours

2016 Haas UMC-750 with Haas Probing, 30 Station Tool Changer, ONLY 500 Cutting Hours

Used 1977 Hardinge HC Super Precision Chucker Tool Room Lathe

1977 Hardinge HC Super Precision Chucker Tool Room Lathe

Used 2010 Haas ST-30M with Haas Barfeed, C Axis, Milling Capability, Tailstock, Chip Conveyor, Parts Catcher, Tool Presetter

2010 Haas ST-30M with Haas Barfeed, C Axis, Milling Capability, Tailstock, Chip Conveyor, Parts Catcher, Tool Presetter

Used 2013 JMT Model PBF 2560 Hydraulic Press Brake

2013 JMT Model PBF 2560 Hyd. Press Brake w/ 66 Ton Cap., 100" Bend Length, Back Gauge, Punches & Dies, Delem DA-52S Cntrl.

Used 2011 Haas SL-40T with 15" Hyd. Chuck, Tool Presetter, Tailstock, Chip Conveyor, Geared Head, Block Style Turret, 7700 Spindle Hrs.

2011 Haas SL-40T with 15" Hyd. Chuck, Tool Presetter, Tailstock, Chip Conveyor, Geared Head, Block Style Turret, 7700 Spindle Hrs.

Used 2018 Haas UMC-750SS with Probing, Coolant Thru Spindle, 15,000 RPM, 40 ATC, Chip Conveyor, less than 7,400 Cutting Hours

2018 Haas UMC-750SS with Probing, Coolant Thru Spindle, 15,000 RPM, 40 ATC, Chip Conveyor, less than 7,400 Cutting Hours

Used 2014 Haas TL-3B Big Bore with 8.5" Bar Capacity, (2) 24" Manual Chucks, Aloris Tool Post, Hand Wheels

2014 Haas TL-3B Big Bore with 8.5" Bar Capacity, (2) 24" Manual Chucks, Aloris Tool Post, Hand Wheels

Used 2003 Hurco VM2 with 16 Pos. Side Mounted ATC, Remote Jog Handle, Rigid Tap, Floppy Drive, Ulti-Pockets, Extended Memory

2003 Hurco VM2 with 16 Pos. Side Mounted ATC, Remote Jog Handle, Rigid Tap, Floppy Drive, Ulti-Pockets, Extended Memory

Used 2016 Haas UMC-750SS with Coolant Thru Spindle, 15,000 RPM, Haas Probing, 30 ATC, HSM, Extended Memory, 1 Owner Machine

2016 Haas UMC-750SS with Coolant Thru Spindle, 15,000 RPM, Haas Probing, 40 ATC, HSM, Extended Memory, 1 Owner Machine

Used 2011 Haas VF-7/40, 24 Station Side Mounted ATC, 4th Axis Drive, TSC Prepped, High Speed Machining, 7500 RPM

2011 Haas VF-7/40, 24 Station Side Mounted ATC, 4th Axis Drive, TSC Prepped, High Speed Machining, 12k rpm

Used 2006 Haas VF-7/40, 24 Station Side Mounted ATC, 4th Axis Drive, TSC Prepped, High Speed Machining, 7500 RPM

2006 Haas VF-7/40, 24 Station Side Mounted ATC, 4th Axis Drive, TSC Prepped, High Speed Machining, 7500 RPM

Used 2013 Doosan Puma 700A with 18" Hyd. Chuck, 6.5" Bar Capacity, 63" cc, Tailstock, Chip Conveyor, Tool Presetter, Fanuc 32i Cntrl

2013 Doosan Puma 700A with 18" Hyd. Chuck, 6.5" Bar Capacity, 63" cc, Tailstock, Chip Conveyor, Tool Presetter, Fanuc 32i Cntrl

Used 2012 Doosan Puma 400MB with C Axis, Milling Capable, 15" Hyd. Chk, 4.5" Bar Cap., 41.3" cc, Tailstock, Conveyor, Live Tooling

2012 Doosan Puma 400MB with C Axis, Milling Capable, 15" Hyd. Chk, 4.5" Bar Cap., 41.3" cc, Tailstock, Conveyor, Live Tooling

Used 2009 Southwestern Industries TRAK TRL 1840SX with Tailstock, 8 Pos. Indexable Turret, Collet Chuck, Geared, SLX Control

2009 Southwestern Industries TRAK TRL 1840SX with Tailstock, 8 Pos. Indexable Turret, Collet Chuck, Geared, SLX Control

Used 2010 Haas VF8/50 with Haas Probing, 30 Station Side Mounted ATC, High Pressure Coolant, High Speed Machining, 50 Taper Option

2010 Haas VF8/50 with Haas Probing, 30 Station Side Mounted ATC, High Pressure Coolant, High Speed Machining, 50 Taper Option

Used 2012 Southwestern Industries TRAK TRL 1840SX with Tailstock, Tool Post, Geared, SLX Series Control

2012 Southwestern Industries TRAK TRL 1840SX with Tailstock, Tool Post, Geared, SLX Series Control

Used 2008 Haas GT-10 Chucker with 5" Chuck, 8 Station Turret, Coolant Tank & Pump,

2008 Haas GT-10 Chucker with 5" Chuck, 8 Station Turret, Coolant Tank & Pump,

Used 2012 Doosan Puma 700L with 24" Hyd. Chk, 6.5" Bar Cap., 126" Turn Length, SMW Steady Rest, Tailstock, Conveyor, Tool Eye

2012 Doosan Puma 700L with 24" Hyd. Chk, 6.5" Bar Cap., 126" Turn Length, SMW Steady Rest, Tailstock, Conveyor, Tool Eye

Used 2012 Haas VF-6/40

2012 Haas VF-6/40 with 24 Station Side Mounted ATC, Haas WIPS Renishaw Part & Tool Probe, Program. Coolant, Jog Handle

Used 2019 Tormach 1100MX w/4th axis Rotary Table

2019 Tormach 1100M with 12 Pos. ATC, Draw Bar, Manual Speeder, Tool Presetter, Digitizing Probe, Vise, Tooling, LOW USE !!

Used 2019 Haas VF-5/50 XT

2019 Haas VF-5/50 XT with Coolant Thru Spindle, Haas Probing, 50 Taper, Extended X 60" Travel, 7500 RPM, 60 HP, 30 ATC

Used 2011 Haas VF-7/40, 24 Station Side Mounted ATC, 4th Axis Drive, Programmable Coolant, Remote Jog Handle, 7500 RPM

2011 Haas VF-7/40, 24 Station Side Mounted ATC, 4th Axis Drive, Programmable Coolant, Remote Jog Handle, 7500 RPM

Used Hwacheon Mega T130 CNC T-Lathe with 51.18" Swing, 35.83" Max Cut Diam., 400 RPM, 6.1" Bore, 50" Chuck, 12 Station Turret, Fanuc

Hwacheon Mega T130 CNC T-Lathe w/ 51.18" Swing, 35.83" Max Cut Diam., 400 RPM, 6.1" Bore, 40" Chuck, 4 Pos. Trt., Siemens Cntrl

Used 2003 Chiron DZ-12K S High Speed 5 Axis VMC, Fixed Table Design, Twin Spindle, Rotary/Tilt Type Table

2003 Chiron DZ-12K S High Speed 5 Axis VMC, Rotary/Tilt Type Table, Dual 15,000 RPM Spindles, (2) 16 Station Tool Changers

Used 2011 Mazak Nexus VCN 510C II with Tool Probing, 4th Axis Drive, Chip Conveyor, 30 Station ATC

2011 Mazak Nexus VCN 510C II with Tool Probing, 4th Axis Drive, Chip Conveyor, 30 Station ATC

Used Cincinnati Hydraulic Press Brake Model 60CBII, 60 Ton, 4 ft., 8" Stroke

Cincinnati Hydraulic Press Brake Model 60CBII, 60 Ton, 4 ft., 8" Stroke

Used 2020 Haas VF-2SS

2020 Haas VF-2SS, 4th Axis Rotary Table, Tailstock, Side Mount Tool Changer, Auto Door

Used 2013 Mazak Nexus VCN 510C II with Prepped for Coolant Thru Spindle, 4th Axis Drive, Chip Conveyor, 30 Station ATC

2013 Mazak Nexus VCN 510C II with Prepped for Coolant Thru Spindle, 4th Axis Drive, Chip Conveyor, 30 Station ATC

Used 2004 Haas VF8/50 with 50 Taper Spindle, 10,000 RPM Geared Head, Coolant Thru Spindle, Probe Ready, PCool, Auger, Side Mounted ATC

2004 Haas VF8/50 with 50 Taper Spindle, 10,000 RPM Geared Head, Coolant Thru Spindle, Probe Ready, PCool, Auger, Side Mounted ATC

Used 2020 Haas TR-160 4th/5th Axis Brushless Trunnion Table

Haas TR-160 4th/5th Axis Brushless Trunnion Table

Used Hwacheon Mega 95/3000 with 48.4" Max Turn Diameter, 118" Max Length, 6" Bar Capacity, Steady Rest, Tailstock, 24" 3 Jaw Chuck

Hwacheon Mega 95/3000 with 48.4" Max Turn Diameter, 118" Max Length, 6" Bar Capacity, Steady Rest, Tailstock, 24" 3 Jaw Chuck

Used 2020 DMG DMU 50

2020 DMG DMU 50 5 Axis VMC with Probing, CTS, 20,000 RPM, Rotary Tilt Type Table

Used 2006 Doosan Puma 700LM with C Axis & Milling, 32" 4 Jaw Man. Chk, 6.5" Bar Cap., 126" Turn Length, SMW Steady Rest, Tailstock, Conveyor

2006 Doosan Puma 700LM with C Axis & Milling, 32" 4 Jaw Man. Chk, 6.5" Bar Cap., 126" Turn Length, SMW Steady Rest, Tailstock, Conveyor

Used 2006 Doosan Puma 700L with 24" Hyd. Chk, 6.5" Bar Cap., 126" Turn Length, SMW Steady Rest, Tailstock, Conveyor, Tool Eye

2006 Doosan Puma 700L with 24" Hyd. Chk, 6.5" Bar Cap., 126" Turn Length, SMW Steady Rest, Tailstock, Conveyor, Tool Eye

Used 2015 Doosan Puma 800LM with C Axis & Milling, 31.5" 3 Jaw Rohn Air Chk, 12.6" Bar Cap., 126" Turn Length, New RIP Steady Rest, Tailstock, Conveyor

2015 Doosan Puma 800LM with C Axis & Milling, 31.5" 3 Jaw Rohn Air Chk, 12.6" Bar Cap., 126" Turn Length, New RIP Steady Rest, Tailstock, Conveyor

Used 2015 Doosan Puma 800LM with C Axis & Milling, 32" 4 Jaw Manual Chk, 12.6" Bar Cap., 126" Turn Length, New RIP Steady Rest, Tailstock, Conveyor

2015 Doosan Puma 800LM with C Axis & Milling, 32" 4 Jaw Manual Chk, 12.6" Bar Cap., 126" Turn Length, New RIP Steady Rest, Tailstock, Conveyor

Used 2004 Yama Seiki GS-460L Heavy Duty Lathe with 24" SMW Air Chuck, 8" Bar Cap, 29" sw, 79" cc, 60 HP, Steady Rest, Chip Conveyor

2004 Yama Seiki GS-460L Heavy Duty Lathe with 24" SMW Air Chuck, 8" Bar Cap, 29" sw, 79" cc, 60 HP, Steady Rest, Chip Conveyor

Used 2017 Haas VF-6SS

2017 Haas VF-6SS, WIPS Renishaw Tool & Part Probe, Remote Jog Handle, Programmable Coolant, Rigid Tapping

Used 2012 Haas VF8/50 with Coolant Thru Spindle, Probe Ready, 4th Axis Table, CAT 50, 7500 RPM, 30 Station Tool Changer,

2012 Haas VF8/50 with Coolant Thru Spindle, Haas HRT-310 4th Axis Table, Probe Ready, CAT 50, 7500 RPM, 30 Station ATC, MORE !!

Used 1987 Oliver Model 876/6 Non-Ferrous Precision Automatic Plate Saw with 6" Plate Thickness, 12' x 12' Table, Backgauge, AB Panelview 550

1987 Oliver Model 876/6 Non-Ferrous Precision Automatic Plate Saw with 6" Plate Thickness, 12' x 12' Table, Backgauge, AB Panelview 550

Used 2015 Doosan HC400-II, Coolant Thru Spindle, 60 ATC, 1 Degree Pallet Indexing, Manual Guide i Conversational, Fanuc i Series Control

2015 Doosan HC400-II, Coolant Thru Spindle, 60 ATC, 1 Degree Pallet Indexing, Manual Guide i Conversational, Fanuc i Series Control

Used 2007 Mazak Nexus QTN 450-IIM/3000 with Full C Axis Spindle Rotation, Milling Capable, 18" Hyd Chuck, 6" Bar Capacity, 120" cc

2007 Mazak Nexus QTN 450-IIM/3000 with Full C Axis Spindle Rotation, Milling Capable, 18" Hyd Chuck, 6" Bar Capacity, 120" cc

Used 2007 SNK-Ikegai NB130 PE3.5 Table Type CNC Horizontal Boring Mill,

2007 SNK-Ikegai NB130 PE3.5 Table Type CNC Horizontal Boring Mill, Rotary Table, 60 Station ATC, Coolant Thru Spindle, Low Hours

Used 1998 Haas VF-EXT with Flood Coolant,

1998 Haas VF-EXT with Flood Coolant, Belt Driven, CAT 40, 7500 RPM 30" X Axis Travel, 20 Station ATC, Well Cared For

Used 2007 Mazak Integrex 100-IIIST, Parts Catcher, Chip Conveyor, Fire Suppression System

2007 Mazak Integrex 100-IIIST, Parts Catcher, Chip Conveyor, Fire Suppression System

Used 2009 Haas VF2YT with Extended Y Axis Travel, Chip Auger, Rigid Tapping, 2 Spd Gearbox, 7500 RPM, 20 ATC

2009 Haas VF2YT with Extended Y Axis Travel, Chip Auger, Rigid Tapping, 2 Spd Gearbox, 7500 RPM, 20 ATC

Used Haas TR-210 2 Axis Trunnion Style

Haas TR-210 2 Axis Trunnion Style

Used 2012 Haas ST-40 Chucker with 15" Hydr. Chuck, Tool Presetter, Chip Conveyor, 4" Bar Capacity, Some Tool Holders (no tailstock)

2012 Haas ST-40 Chucker with 15" Hydr. Chuck, Tool Presetter, Chip Conveyor, 4" Bar Capacity, Some Tool Holders (no tailstock)

Used 2006 Awea BM-1200 with Chip Conveyor, 24 Station Side Mount ATC, RJH, Boxed Ways, Fanuc Control

2006 Awea (Toyoda) BM-1200 with Chip Conveyor, 24 Station Side Mount ATC, RJH, Boxed Ways, Fanuc Control

Used 2007 HE & M Model V100HLM-3 Automatic Vertical Bandsaw with Upgraded Hydraulic Package, 18" x 22" Cutting Capacity

2007 HE & M Model V100HLM-3 Semi-Automatic Vertical Bandsaw w/ Upgraded Hydr. Package, 18" x 22" Cutting Capacity

Used 2015 Haas TL-2 Big Bore

2015 Haas TL-2 Big Bore

Used 2003 Haas VF-7B/40, 24 Station Side Mounted ATC, High Speed Machining, Prog. Coolant, 7500 RPM, Chip Auger, Quick Code

2003 Haas VF-7B/40, 24 Station Side Mounted ATC, High Speed Machining, Prog. Coolant, 7500 RPM, Chip Auger, Quick Code

Used 2021 Haas VF-5SS

2021 Haas VF-5SS, HRT-160 Rotary Table w/Tailstock, WIPS Renishaw Tool & Part Probe, Rigid Tapping, Coolant Thru the Spindle, Programmable Coolant, 15k RPM Spindle

Used 2017 Haas VF-3YT/40

2017 Haas VF-3YT/40, WIPS Renishaw Tool & Part Probe, Rigid Tapping, High Speed Machining

Used 2020 Haas VF-3SSYT

2020 Haas VF-3SSYT

Used 1967 Boyar-Schultz 612 Deluxe Manual Surface Grinder

1967 Boyar-Schultz 612 Deluxe Manual Surface Grinder, 1 HP, (2) 7" x .25" x 1.25" Grinding Wheels

Used 1970 Bridgeport Series I Manual Knee Mill with 1 HP Motor,

1970 Bridgeport Series I Manual Knee Mill with 1 HP Motor,

Used 2006 Explorer SA45-V22/2200 CNC Big Bore Lathe with 21.06" Bore,

2006 Vantage Explorer SA45-V22/2200 CNC Big Bore Lathe with 21.06" Bore,

Used 2013 Haas VF-2TR

2013 Haas VF-2TR with Haas TR160 Trunnion Table, WIPS Renishaw Tool & Part Probe, CTS, PCool, HSM, Remote Jog Handle

Used 2010 Milltronics ML40/160

2010 Milltronics ML40/160

Used 2018 Haas VM-6

2018 Haas VM-6, WIPS Renishaw Tool & Part Probe, Prewired for 4th axis, Coolant thru the Spindle, PCool, Hi-Spd Machining

Used 2020 Haas Mini Mill 2 with 4th Axis Drive, Haas Probing, 10k RPM Spindle, HSM, PCool

2020 Haas Mini Mill 2 with 4th Axis Drive, Haas Probing, 10k RPM Spindle, HSM, PCool

Used 2007 Johnford ST-60FH with 10" Bar Capacity, 31.49" Turn Diam., 54" Turn Length, Fanuc Cntrl.

2007 Johnford ST-60FH with 10" Bar Capacity, 31.49" Turn Diam., 54" Turn Length, Fanuc Cntrl.

Used 1990 Mori Seiki SL-8B with Updated Fanuc 0i-TD Control, 24" 3 Jaw Hydraulic Chuck, 10.2" Spindle Bore

1990 Mori Seiki SL-8B with Updated Fanuc 0i-TD Control, 24" 3 Jaw Hydraulic Chuck, 10.2" Spindle Bore

Used 2016 Mazak Nexus QTN 450-II/1000 with 7.2" Spindle Bore, 6.5" Bar Capacity, 40.2" cc, Rear Chuck Prep, Chip Conveyor, Tailstk, Tool Presetter

2016 Mazak Nexus QTN 450-II/1000 with 7.2" Spindle Bore, 6.5" Bar Capacity, 40.2" cc, Rear Chuck Prep, Chip Conveyor, Tailstk, Tool Presetter

Used 2015 Haas ST-30

2015 Haas ST-30 with 10" Chuck, 3" Bar Cap., Chip Conveyor, Tailstock, Tool Presetter, 21" x 32.5" Capacity,

Used 2021 Mazak QT-EZ 10MY

2022 Mazak QT-EZ 10MY with C Axis, Milling/Drilling Capable, Y Axis, Chip Conveyor, 10" Chuck, 3" Bar Capacity, Tailstock, Tool Presetter