2012 Doosan Puma 400MC with C Axis, Milling Capable, 21" Chuck, 6.5" Bar Capacity, Tailstock, Conveyor, Live Tool Holder
No disponible
2012 Doosan Puma 400MC with C Axis, Milling Capable, 21" Chuck, 6.5" Bar Capacity, Tailstock, Conveyor, Live Tool Holder
Ubicación:Míchigan
Descripción
Full C Axis Spindle Rotation
Live Milling / Drilling Capability
Chip Conveyor
21" 3 Jaw Hydraulic Chuck
6.5" Bar Capacity
Tailstock - Tow Along with Hydraulic Quill
Tool Presetter
USB Port Interface
Hard Disk Interface
RS 232 Port Interface
Coolant System with Tank & Pump
Boxed Way Construction on Slant Bed
Geared Headstock
Wired 200/220V Electrics
Chuck and Tailstock Foot Pedals
All Available Tooling Includes:
-(1) Boring Bar Holder
-(3) Turning Tool Holders
-(1) Eppinger Straight/Radial Collet Drilling Live Tool Holder #R789752A
All Available Manuals
**Able to add Fanuc Manual Guide i Conversational programming**
**ONLY 3673 Run Time Hours**
Especificaciones
| Fabricante | Doosan |
| Modelo | Puma 400MC |
| Año | 2012 |
| Condición | Usado |
| Número de Stock | 120053 |
| Control | Fanuc i Series Control |
| Chuck Size | 21" Hydraulic Chuck |
| Maximum Swing | 30.31" |
| Maximum Turning Diameter | 21.7" |
| Maximum Turning Length | 38.5" |
| Maximum Bar Capacity | 6.5" |
| X-Axis Travel | 14.1" |
| Z-Axis Travel | 43.5" |
| C Axis Spindle Rotation | .001 Degree |
| Spindle Nose / Spindle Bore | A1-15" / 7.1" |
| Spindle Speeds | 1 - 1,500 RPM |
| Spindle Motor | 50 HP - 2 Speed Gearbox |
| Rotary Tool Motor | 15 HP |
| Number of Turret Positions | 12 Position Turret - BMT 75 Type |
| Rapid Traverse Rates X/Z | 630 IPM / 790 IPM |
| Tailstock Quill Diameter / Center | 4.7" / MT #6 |
| Tailstock Quill Travel | 4.7" |
| Machine Dimensions | 211.1" x 74.02" (97.64" with electrical cabinet allowance) x 90.75" this includes chip conveyor |
| Machine Weight | 18,250 lbs. |