2005 Hurco TM-6
Vendido
2005 Hurco TM-6
$17.950 (USD)
Ubicación:Texas
Descripción
6" 3 Jaw Hydraulic Chuck
Tailstock
Parts Catcher
Machine Status Lights
(2) Foot Pedals
Chip Pan/Coolant Tank with Pump
USB Port Interface
3.5" Floppy Disk Interface
RS 232 Port Interface
Capable of both Conversational and G Code Programming
(6) Boring Holders
(3) Facing Holders
(3) Sets Turning Wedges
**7,137 Spindle On Hours**
**New Spindle Bearings Installed in 2021**
Especificaciones
| Fabricante | Hurco |
| Modelo | TM-6 |
| Año | 2005 |
| Condición | Usado |
| Número de Stock | 117537 |
| Machine Control | Hurco Max |
| Chuck Size | 6" 3-Jaw Hydraulic |
| Maximum Swing | 16" |
| Maximum Turning Diameter | 12.4" |
| Distance Between Centers | 15.8" |
| Maximum Machining Length | 13.2" |
| X-Axis Travel | 7" |
| Z-Axis Travel | 14" |
| Spindle Nose / Bore / Bar Capacity | A2-5"/2.2"/1.77" |
| Spindle Motor | 15 HP |
| Spindle Speed | 6,000 RPM |
| Number of Turret Positions | 12 |
| Rapid Traverse Rates X/Z | 750 IPM / 945 IPM |
| Machine Dimensions LxWxH | 82" x 60" x 77" |
| Machine Weight | 7,010 LBS |