2006 Doosan/Daewoo Puma 2500LSY
Vendido
2006 Doosan/Daewoo Puma 2500LSY
$69.500 (USD)
Ubicación:Dundee, FL
Descripción
Subspindle
Full C Axis Spindle Rotation - Both Spindles
Live Milling/Drilling Capability
Y Axis Capability
LNS Quick Load Servo S3 Short Barfeeder
Parts Catcher
Parts Exit Conveyor
ATS S30TLS Collet Chuck on Main Spindle
6" 3 Jaw Samchully HS-06 Hyd. Chk Subspindle
ATS 3JTLS Collet Chuck for Subspindle
Long Bed Design Option
PCMCIA Card Interface
Ethernet Interface
RS 232 Port Interface
Boxed Ways
All Available Static Tooling
Some Collets
(3) Live Tool Holders - (2) Axial & (1) Radial
All Available Manuals
Machine had new subspindle draw tube/actuator done on it recently
Regularly Maintained
21,332 Cutting Hours
Especificaciones
| Fabricante | Doosan/Daewoo |
| Modelo | Puma 2500LSY |
| Año | 2006 |
| Condición | Usado |
| Número de Stock | 117420 |
| Control | Fanuc 18i-TB |
| Chuck Sizes Main / Subspindle | S30 Collet / 3J & 6" Hyd. |
| Maximum Swing over Bed | 23.6" |
| Maximum Cutting Diameter | 13" |
| Maximum Machining Length | 29.5" |
| Maximum Bar Capacity - Main / Subspindle | 3" / 1.375" |
| X-axis travel | 9.8" |
| Y-Axis Travel | 3.94" |
| Z-Axis Travel | 32.6" |
| B-Axis Travel (Subspindle) | 22.8" |
| C1 Axis Spindle Rotation/C2 Axis Spindle Rotation | .001 / .001 Degree |
| Spindle Nose / Spindle Bore | A2-8" / 3.54" |
| Spindle Speeds - Main | 35 - 3,500 RPM |
| Spindle Motor - Main | 30 HP |
| Subspindle Nose / Subspindle Bore | A2-5" / 1.77" |
| Subspindle Speed / Subspindle Motor | 6,000 RPM / 10 HP |
| Rotary Tool Speed / Rotary Motor | 6,000 RPM / 5 HP |
| Number of Turret Positions | 12 Station Turret |
| Rapid Traverse Rates X/Z/Y/B | 790 / 945 / 295 / 787 IPM |
| Machine Dimensions | 125" x 67" |
| Machine Weight | 11,670 lbs. |