2010 Haas TL-2 Full Enclosure, Tailstock, Tool Post, 10" Chuck, Only 177 Feed Cut Hours
2010 Haas TL-2 Full Enclosure, Tailstock, Tool Post, 10" Chuck, Only 177 Feed Cut Hours
Contáctenos para conocer el precio
Ubicación:Carolina del Norte
o
Llamar (863) 439-6066
Descripción
Full Enclosure
Tool Post
Tailstock
10" 3 Jaw Chuck
Manual Hand Wheels
Coolant System with Tank & Pump
Integral Chip-Flow Channel
USB Port Interface
RS 232 Port Interface
Vector Drive Spindle
Machine Can Run Either 240V Single Phase or 208V Three Phase Power
**Only 177 Feed Cut Hours**
Especificaciones
| Fabricante | Haas |
| Modelo | TL-2 |
| Año | 2010 |
| Condición | Usado |
| Número de Stock | 120770 |
| Control | Haas CNC Control |
| Chuck Size | 10" 3-Jaw Chuck |
| Maximum Swing over Bed | 20" |
| Maximum Swing Over Cross Slide | 11" |
| Maximum Cutting Diameter | 16" |
| Maximum Machining Length | 48" |
| X-axis travel | 8" |
| Z-Axis Travel | 48" |
| Spindle Nose / Spindle Bore | A2-6" / 3" |
| Spindle Speeds | 1,800 RPM |
| Spindle Motor | 10 HP |
| Number of Turret Positions | Tool Post |
| Rapid Traverse Rates X/Z | 450 IPM / 450 IPM |
| Machine Dimensions | 100" x 55" x 80" |
| Machine Weight | 5,000 lbs. |