2007 Mazak Integrex 400-IV/1500 Turn Mill Center w/ C Axis, Y Axis, Tailstock, 60" cc, 15" Chk, 4" Bar Cap., 40 ATC, Chip Conv., Tooling
2007 Mazak Integrex 400-IV/1500 Turn Mill Center w/ C Axis, Y Axis, Tailstock, 60" cc, 15" Chk, 4" Bar Cap., 40 ATC, Chip Conv., Tooling
Contáctenos para conocer el precio
Ubicación:Georgia
o
Llamar (863) 439-6066
Descripción
Y Axis Capability
B Axis Pendulum Head
Full "C" Axis Spindle Rotation
Live Milling/Drilling Capability
15" 3 Jaw Hydraulic Chuck
40 Tool Magazine
Programmable Tailstock
High-Pressure Coolant Pump
Coolant Thru Mill Head
Chip Conveyor
Automatic Tool Eye
IC Memory Card Interface
Cardbus Interface - 2 Slots
LAN Port Interface
USB Port Interface
Multi Tap Transformer 230/460 Volt
Set Up For Tool Probe (Probe not included)
All Available Manuals
Misc. Tooling Mill Holders, ER-40 Collet Holders, Boring Bars, Grooving, Threading
Especificaciones
| Fabricante | Mazak |
| Modelo | Integrex 400-IV/1500 |
| Año | 2007 |
| Condición | Usado |
| Número de Stock | 120703 |
| Control | Mazatrol Matrix |
| Chuck Sizes Main / Subspindle | 15" Hydraulic Chuck |
| Maximum Swing / Using Y Axis | 34" / 26"-30" |
| Maximum Cutting Length | 60" |
| Distance Between Centers | 60" |
| X-Axis Travel | 24.8" |
| Y-Axis Travel | +/- 4.53" |
| Z-Axis Travel | 62.41" |
| B-Axis Tilt Movement | 225 Degrees in .001 Increment |
| C Axis Spindle Rotation | .0001 Degree |
| Spindle Nose / Bore / Bar Capacity | A2-8" / 4.4" / 4.0" |
| Spindle Speeds | 35 - 3,300 RPM |
| Spindle Motor | 40 HP |
| Rotary Tool Speed / Rotary Motor | 12,000 RPM / 25 HP |
| Tool Magazine Capacity | 40 Position ATC - Capto C6 |
| Rapid Traverse Rates (X, Y, Z) | 1496 IPM, 1024 IPM, 1496 IPM |
| Machine Dimensions | 202" x 93" x 115" |
| Machine Weight | 28,500 lbs. |