2006 Mazak Nexus QTN 100-II M with Full C Axis Milling, Chip Conveyor, LNS Short Barfeed, Parts Catcher, Tailstock, Tool Eye
2006 Mazak Nexus QTN 100-II M with Full C Axis Milling, Chip Conveyor, LNS Short Barfeed, Parts Catcher, Tailstock, Tool Eye
$49.900 (USD)
Ubicación:Nueva Jersey
o
Llamar (863) 439-6066
Descripción
Full C Axis Spindle Rotation
Live Milling / Drilling Capability
LNS Quick Load Servo S3 Short Bar Feeder
Automatic Tool Eye
Parts Catcher
Rear Exit Chip Conveyor
Tailstock
6" 3 Jaw Hydraulic Chuck
Mist Collector
Background Tool Path Check
Milling Spindle Synchronous Tapping
Automatic Chuck Jaws Open/Close
Chuck Air Blast
Complete Coolant System w/ Tank & Pump
Memory Card Interface
Network Interface
3.5" Floppy Disk Drive Interface
RS 232 Port Interface
(14) Static Holders
(4) Live Tool Holders
(11) Spindle Lineres
All Available Manuals
**Very Low Hours**
Especificaciones
| Fabricante | Mazak |
| Modelo | Nexus QTN 100-II M |
| Año | 2006 |
| Condición | Usado |
| Número de Stock | 120626 |
| Control | Mazatrol Matrix Nexus Control |
| Chuck Size | 6" 3-Jaw Hydraulic |
| Maximum Swing | 21.6" |
| Maximum Cutting Diameter | 11" |
| Maximum Cutting Length | 12.1" |
| Maximum Bar Capacity | 1.625" |
| X-Axis Travel | 15.12" |
| Z-Axis Travel | 13" |
| Spindle Nose / Spindle Bore / Bar Capacity | A2-5" / 2.4" / 2" |
| Spindle Speeds | 6,000 RPM |
| Spindle Motor | 15 HP |
| Live Tooling Speed / Live Tooling Motor | 4,500 RPM / 5 HP |
| Number of Turret Positions | 12 Station Turret |
| Rapid Traverse Rates X / Z | 1181 IPM / 1299 IPM |
| Machine Dimensions | 92" x 84" x 70" machine only |
| Machine Weight | 8,500 lbs. |