1998 Mazak QT40/1500 with 60" Centers, 15" Hyd Chuck, Tailstock, Chip Conveyor, Tool Eye, 2.84" Bar Capacity
1998 Mazak QT40/1500 with 60" Centers, 15" Hyd Chuck, Tailstock, Chip Conveyor, Tool Eye, 2.84" Bar Capacity
Contáctenos para conocer el precio
Ubicación:Luisiana
o
Llamar (863) 439-6066
Descripción
15" Hydraulic Chuck
Automatic Tool Eye
Chip Conveyor
Programmable Tailstock
Complete Coolant System with Tank & Pump
RS 232 Port Interface
All Available Tooling
All Available Manuals
Wired 200/220V Electrics
**Machine is being decommissioned December 11, 2025 and replaced with a newer machine with milling and Y axis ability, no longer under power**
**Hours in photos are likely not accurate, but machine has been well taken care of and runs great**
Especificaciones
| Fabricante | Mazak |
| Modelo | QT40/1500 |
| Año | 1998 |
| Condición | Usado |
| Número de Stock | 120530 |
| Control | Mazatrol Tplus Control |
| Chuck Size | 15" Hydraulic Chuck |
| Maximum Swing | 20" |
| Maximum Cutting Diameter | 15.75" |
| Maximum Machining Length | 59.3" |
| Maximum Bar Capacity | 2.84" |
| X-Axis Travel | 11" |
| Z-Axis Travel | 61.3" |
| Spindle Nose / Spindle Bore | A2-8" / 3.15" |
| Spindle Speeds | 30 - 3,000 RPM |
| Spindle Motor | 40 HP |
| Transmission | 3 Ranges - 1,063 ft/lbs Torque |
| Number of Turret Positions | 12 Sided/24 Positions |
| Rapid Traverse Rates X/Z | 472 IPM / 709 IPM |
| Tailstock Quill Diameter / Center | 3.94" / MT #5 |
| Machine Dimensions | 165.5" x 81" x 74.2" |
| Machine Weight | 16,280 lbs. |