2007 Haas TL-3 Rigid Tapping, Quick Code, Intuitive Programming, Wired for Brushless Barfeed, 12" 6-Jaw Manual Chuck
2007 Haas TL-3 Rigid Tapping, Quick Code, Intuitive Programming, Wired for Brushless Barfeed, 12" 6-Jaw Manual Chuck
$36.500 (USD)
Ubicación:Florida
o
Llamar (863) 439-6066
Descripción
12" Bison 6 Jaw Chuck “Adjust-Tru” Type - (Self Centering)
Tailstock
Rigid Tapping
Visual Quick Code Programming
Brushless Barfeed Interface
Haas Intuitive Programming System
Manual Hand Wheels
Coolant Tank & Pump
Wired 208/230 Volts
DNC Ability
RS 232 Port Interface
**In Motion Hours 12,472**
**Spindle Run Hours 5,963**
Especificaciones
| Fabricante | Haas |
| Modelo | TL-3 Rigid Tapping, Quick Code, Intuitive Programming, Wired for Brushless Barfeed, 12" 6-Jaw Manual Chuck |
| Año | 2007 |
| Condición | Usado |
| Número de Stock | 120526 |
| Machine Control | Haas CNC Control |
| Chuck Size | 12" 6-Jaw Manual Chuck |
| Maximum Swing | 20" |
| Maximum Swing Over Cross Slide | 13" |
| Maximum Machining Diameter | 20" |
| Distance Between Centers | 60" |
| X-axis travel | 12" |
| Z-Axis Travel | 60" |
| Spindle Speeds | 0 - 1,800 RPM |
| Spindle Nose / Bore / Bar Capacity | A2-6" / 3.5" / 3" |
| Spindle Motor | 18 HP |
| Rapid Traverse Rates X/Z | 75 IPM / 150 IPM |
| Tailstock Bore Taper | #5 MT |
| Machine Dimensions LxWxH | 123" x 77" x 87" |
| Machine Weight | 9,624 lbs |