2006 Leadwell LTC50-BL with 18" Hyd Chk, 4.6" Bar Cap., 33.5" sw, 80" cc, 1500 RPM, 50 HP, Steady Rest, Conveyor, Fanuc 0i-TC
2006 Leadwell LTC50-BL with 18" Hyd Chk, 4.6" Bar Cap., 33.5" sw, 80" cc, 1500 RPM, 50 HP, Steady Rest, Conveyor, Fanuc 0i-TC
$85.000 (USD)
Ubicación:Nueva York, NY
o
Llamar (863) 439-6066
Descripción
18" 3 Jaw Hydraulic Chuck
Chip Conveyor
Programmable Tailstock
Schmidt RIP-218-FT 3 Point Turn Through Steady Rest
Mist Away Mist Collector
Complete Coolant System with Tank & Pump
Multi Part Program Storage Capability
RS 232 Port Interface
3 Color Machine Status Condition Lights
Heavy Boxed Ways and Slant Bed
Coolant System with Tank & Pump
Wired 480V / 3 PH Electrics
All Available Tooling
All Available Manuals
**Control Shows 1,956 Run Time Hours**
Especificaciones
| Fabricante | Leadwell |
| Modelo | LTC50-BL |
| Año | 2006 |
| Condición | Usado |
| Número de Stock | 120456 |
| Machine Control | Fanuc 0i-TC |
| Chuck size | 18" 3 Jaw Hydraulic Chuck |
| Maximum Swing over Bed | 33.46" |
| Maximum Machining Diameter | 31.49" |
| Maximum Machining Length | 80.11" |
| Maximum Bar Capacity | 4.6" |
| X-Axis Travel | 16.73" |
| Z-Axis Travel | 82.67" |
| Spindle Nose / Spindle Bore | A2-11" / 5.59" |
| Spindle Speed | 15 - 1,500 RPM |
| Spindle Motor | 50 HP - 2 Ranges |
| Number of Turret Positions | 12 Station Block Turret |
| Rapid Traverse Rates X / Z | 393 IPM / 472 IPM |
| Machine Dimensions | 288" x 102" x 98" |
| Machine Weight | 45,000 lbs. |