2006 Haas VM-2 Programmable Coolant, 4th Axis Pre Wire, Remote Jog Handle, Rigid Tapping
2006 Haas VM-2 Programmable Coolant, 4th Axis Pre Wire, Remote Jog Handle, Rigid Tapping
Contáctenos para conocer el precio
Ubicación:Florida
o
Llamar (863) 439-6066
Descripción
Programmable Coolant Nozzle
Remote Jog Handle
4th Axis Drive & Wiring
Rigid Tapping
DNC
Rotation & Scaling
Quick Code Programming
M19 Spindle Orientation
Advanced Tool Management
High-Speed Machining
24+1 Position Side Mounted Tool Changer
Auger Style Chip Conveyor
3 1/2" Floppy Disk Interface
RS 232C Port Interface for DNC Operation
Coolant System with Tank and Coolant Pump
230 Volt 3-Phase
All Available Manuals
Especificaciones
| Fabricante | Haas |
| Modelo | VM-2 Programmable Coolant, 4th Axis Pre Wire, Remote Jog Handle, Rigid Tapping |
| Año | 2006 |
| Condición | Usado |
| Número de Stock | 120158 |
| Table size | 36" x 18" |
| Table load capacity | 3,500 lbs |
| X-axis travel | 30" |
| Y-axis travel | 20" |
| Z-axis travel | 20" |
| Spindle taper | CT 40 |
| Spindle speed | 12,000 RPM |
| Spindle motor 30 min. / cont. | 30 HP |
| Tool magazine capacity-side mount | 24 + 1 Position ATC |
| Tool change time | 3.6 seconds |
| Max. tool diameter / length | 5" / 11" |
| Rapid traverse rates | 710 IPM |
| Machine dimensions lxwxh | 111"x91"x91" |
| Machine weight | 7,900 lbs. |