2010 Haas Super Mini Mill 2 w/24+1 Side Mount Tool Changer, Coolant Thru the Spindle
2010 Haas Super Mini Mill 2 w/24+1 Side Mount Tool Changer, Coolant Thru the Spindle
$27.950 (USD)
Ubicación:Illinois
o
Llamar (863) 439-6066
Descripción
Through the Spindle Coolant
24+1 Side Mount Tool Changer
Auger Style Chip Conveyor
Rigid Tapping
3.5" Floppy Disk Drive
RS 232 Port Interface
Coolant System with Tank & Pump
Lincoln Spindle Motor
Wired 260-480V Electrics Three Phase Power Only
**ONLY 141 Spindle Run Hours**
Especificaciones
| Fabricante | Haas |
| Modelo | Super Mini Mill 2 w/24+1 Side Mount Tool Changer, Coolant Thru the Spindle |
| Año | 2010 |
| Condición | Usado |
| Número de Stock | 120110 |
| Machine Control | Haas CNC Control |
| Table Size | 40"x14" |
| Maximum Table Load | 500 lbs |
| X-Axis Travel | 20" |
| Y-Axis Travel | 16" |
| Z-Axis Travel | 14" |
| Spindle Taper | CAT 40 |
| Spindle Speed | 10,000 RPM |
| Spindle Motor | 15 HP |
| Rapid Traverse Rates | 1200 IPM |
| Tool Magazine Capacity | 24+1 Side Mount ATC |
| Distance Spindle Nose to Table Top | 4" - 18" |
| Maximum Tool Diameter / Length / Weight | 3.5" / NA / 12 lbs |
| Machine Dimensions LxWxH | 91"x88"x100" |
| Machine Weight | 6,000 lbs |