2006 Haas TL-1 with Tailstock, Tool Post, Hand Wheels, Both Single & Three Phase Ability
2006 Haas TL-1 with Tailstock, Tool Post, Hand Wheels, Both Single & Three Phase Ability
$17.500 (USD)
Ubicación:Nueva York, NY
o
Llamar (863) 439-6066
Descripción
Tool Post
Tailstock
Rigid Tapping
Coolant Tank with Pump System
Integral Chip-Flow Channel
Flip Down Safety Enclosure
1 MB Program Memory
Manual Hand Wheels
RS 232 Port Interface
Haas Intuitive Turning System
Vector Drive Spindle
Single Phase Power at 240V or Three Phase Power at 208V
Especificaciones
| Fabricante | Haas |
| Modelo | TL-1 |
| Año | 2006 |
| Condición | Usado |
| Número de Stock | 120014 |
| Control | Haas CNC Control |
| Chuck Size | 8" 3 Jaw Chuck |
| Maximum Swing over Bed | 16" |
| Maximum Swing Over Cross Slide | 8.5" |
| Maximum Cutting Diameter | 16" |
| Maximum Machining Length | 30" |
| X-axis travel | 8" |
| Z-Axis Travel | 30" |
| Spindle Nose / Spindle Bore | A2-5" / 2.31" |
| Spindle Speeds | 1,800 RPM |
| Spindle Motor | 7.5 HP |
| Number of Turret Positions | Toolpost |
| Rapid Traverse Rates X/Z | 75 IPM / 150 IPM |
| Machine Dimensions | 84" x 55" x 78" |
| Machine Weight | 4,000 lbs. |