2006 Doosan Puma 300C 2 Axis CNC Lathe - 4" Bar Capacity !!
Vendido
2006 Doosan Puma 300C 2 Axis CNC Lathe - 4" Bar Capacity !!
$36.500 (USD)
Ubicación:Texas
Descripción
12" Kitagawa B-21215X 3 Jaw Hydraulic Chuck
Programmable Tailstock
Tool Presetter
Chip Conveyor
Coolant System with Tank & Pump
3.5" Floppy Disk Drive Interface
RS 232 Port Interface
Wired 200/220V Electrics
All Available Tooling
All Available Manuals
**Total Cutting Hours 9,453 (note, display shows in minutes)**
Especificaciones
| Fabricante | Doosan |
| Modelo | Puma 300C |
| Año | 2006 |
| Condición | Usado |
| Número de Stock | 119597 |
| Control | Fanuc 21i-TB |
| Chuck Size | 12" 3 Jaw Chuck |
| Maximum Swing over Bed | 23" |
| Maximum Swing Over Cross Slide | 14.5" |
| Maximum Turning Diameter | 15.7" |
| Maximum Turning Length | 24.8" |
| Maximum Bar Capacity | 4.0 |
| X-Axis Travel | 11.3" |
| Z-Axis Travel | 26.8" |
| Spindle Nose / Spindle Bore | A2-11" / 4.53" |
| Spindle Speeds | 28 - 2,800 RPM |
| Spindle Motor | 35 HP |
| Transmission | 2 Speed Gearbox |
| Number of Turret Positions | 12 Position Turret |
| Rapid Traverse Rates X/Z | 787 IPM / 945 IPM |
| Tailstock Quill Diameter / Travel | 3.94" / 3.94" |
| Machine Dimensions | 135" x 77" x 80" |
| Machine Weight | 13,892 lbs. |