2000 Miyano MTV-C410 Vertical Machining Center w/ 2 Pallet Changer, (42) BT40 Tool Holders, Rigid Tapping
2000 Miyano MTV-C410 Vertical Machining Center w/ 2 Pallet Changer, (42) BT40 Tool Holders, Rigid Tapping
$9.900 (USD)
Ubicación:Florida
o
Llamar (863) 439-6066
Descripción
180 Degree Fast 2 Pallet Changer System
Rigid Tapping (maximum tapping speed 5,000 rpm)
10 Station Tool Changer
RS 232 Port Interface
Flood Coolant System
Air Blow on Spindle
Coolant Tank with Pump
Wired 230V Electrics
All Available Manuals
(42) BT 40 Tool Holders Included (Kennemetal, Nikken, Etc.)
Especificaciones
| Fabricante | Miyano |
| Modelo | MTV-C410 Vertical Machining Center w/ 2 Pallet Changer |
| Año | 2000 |
| Condición | Usado |
| Número de Stock | 118129 |
| Control | Yasnac i-80 Control |
| Table Size | 19" x 14.25" (2) Pallets |
| Maximum Table Load | 220 lbs. |
| Table Indexing Time | 2.3 seconds |
| Distance Spindle Nose to Table Top | 9.85" - 21.67" |
| X-Axis Travel | 15.76" |
| Y-Axis Travel | 11.82" |
| Z-Axis Travel | 11.82" |
| Spindle Taper | BT #40 |
| Spindle Speed | 8,000 rpm |
| Spindle Motor | 7.3 HP |
| Tool Magazine Capacity | 10 Station Tool Changer |
| Maximum Tool Diameter / Length / Weight | 3.15" / 7.88" / 8.8 lbs. |
| Tool Change Time Chip to Chip | 2.5 seconds |
| Tool Change Time Tool to Tool | 1.2 seconds |
| Rapid Traverse Rates X, Y / Z | 1891 IPM / 1418 IPM |
| Machine Dimensions LxWxH | 104" x 60" x 89" |
| Machine Weight | 6,820 lbs. |