2017 Haas TL-2
Vendido
2017 Haas TL-2
$32.500 (USD)
Ubicación:Maine
Descripción
10" 3 Jaw Manual Chuck
Tailstock with Live Center
Upgraded A2-6" Spindle Nose with 3" Bore and 2,500 RPM
Dorian Quick Change Tool Post - 3/4" Type
Coolant System with Tank & Pump
Rigid Tapping
Haas Intuitive Programming System
Spindle Orientation
Full Machine Chip Enclosure Doors
Work Light
USB Port Interface
RS 232 Port Interface
1 GB Program Memory
Vector Drive Spindle
Machine Set at 220V Three Phase Power
Includes Approximately (8) Tool Holders
Cycle Start Hours 2,193
Feed Cutting Hours 1,804
Manufactured New in March 2017
Lists New as Equipped at $50,765
Especificaciones
| Fabricante | Haas |
| Modelo | TL-2 |
| Año | 2017 |
| Condición | Usado |
| Número de Stock | 118074 |
| Control | Haas CNC Control |
| Chuck Size | 10" 3 Jaw Chuck |
| Maximum Swing over Bed | 20" |
| Maximum Swing Over Cross Slide | 11" |
| Maximum Cutting Diameter | 16" |
| Maximum Machining Length | 48" |
| X-axis travel | 8" |
| Z-Axis Travel | 48" |
| Spindle Nose / Spindle Bore / Bar Capacity | A2-6" / 3.0" / 3.0" |
| Spindle Speeds | 2,500 RPM |
| Spindle Motor | 10 HP |
| Number of Turret Positions | Tool Post |
| Rapid Traverse Rates X/Z | 450 IPM / 450 IPM |
| Tailstock Bore Taper | MT #4 |
| Machine Dimensions | 100" x 55" x 80" |
| Machine Weight | 5,000 lbs. |