2011 Doosan Puma 2600 with 10" Chuck, Tailstock, Tool Presetter, Chip Conveyor, Fanuc 0i Control
2011 Doosan Puma 2600 with 10" Chuck, Tailstock, Tool Presetter, Chip Conveyor, Fanuc 0i Control
$47.950 (USD)
Ubicación:Carolina del Norte
o
Llamar (863) 439-6066
Descripción
10" 3 Jaw Hydraulic Chuck
Tool Presetter
Chip Conveyor
Tailstock
3 Color Machine Status Condition Lights
PCMCIA Card Interface
Ethernet Interface
RS 232 Port Interface
Boxed Ways
All Available Tooling
**Run Time Hours 9,909**
**Estimated Spindle Run Hours 4,000**
Especificaciones
| Fabricante | Doosan |
| Modelo | Puma 2600 |
| Año | 2011 |
| Condición | Usado |
| Número de Stock | 120604 |
| Control | Fanuc 0i Series Control |
| Chuck Size | 10" 3 Jaw Hydraulic Chuck |
| Maximum Swing over Bed | 30.7" |
| Maximum Cutting Diameter | 18.9" |
| Maximum Machining Length | 29.9" |
| Maximum Bar Capacity | 2.99" |
| X-Axis Travel | 10.24" |
| Z-Axis Travel | 32.7" |
| Spindle Nose / Spindle Bore | A2-8" / 3.54" |
| Spindle Speeds - Main | 4,000 RPM |
| Spindle Motor - Main | 25 HP |
| Number of Turret Positions | 12 Station Turret |
| Rapid Traverse Rates | 1182 IPM |
| Machine Dimensions | 142" x 74" x 75" |
| Machine Weight | 12,100 lbs. |