2015 Doosan Lynx 220LC with 8" Hyd Chuck, Toolsetter, Tailstock, Parts Catcher, Chip Converyor, Barfeed Interface ONLY
2015 Doosan Lynx 220LC with 8" Hyd Chuck, Toolsetter, Tailstock, Parts Catcher, Chip Converyor, Barfeed Interface ONLY
$49,950 (USD)
Location:Illinois
or
Call (863) 439-6066
Description
8" Samchully 3 Jaw Hydraulic Chuck
Turbo Chip Conveyor
Tailstock
Tool Pre-Setter
Parts Catcher
Barfeed Interface
Coolant System with Tank & Pump
Embedded Ethernet
64 Pairs Tool Offsets
Card Interface
RS 232 Port Interface
Miscellaneous Tool Blocks
Wired 220V Electrics
**Run Time Hours 5,677**
**Cutting Time Hours 3,983**
Specifications
| Manufacturer | Doosan |
| Model | Lynx 220LC |
| Year | 2015 |
| Condition | Used |
| Stock Number | 120603 |
| Machine Control | Fanuc i Series Control |
| Chuck size | 8" Hydraulic Chuck |
| Maximum Swing | 20.08" |
| Maximum turning diameter | 12.6" |
| Maximum turning length | 20.7" |
| X-axis travel | 6.89" |
| Z-axis travel | 21.65" |
| Spindle Nose / Bore / Bar Capacity | A2-6" / 2.99" / 2.6" |
| Spindle speed | 40 - 4,000 RPM |
| Spindle motor | 20 HP |
| Turret type | 12 Position Turret |
| Rapid traverse rates x, z | 1181 PM / 1417 IPM |
| Tailstock Quill Diameter / Center | 2.6" / MT #4 |
| Machine Dimensions LxWxH | 90"x72"x65" |
| Machine weight | 7,780 lbs |