2007 Mazak Nexus QTN 200-II MSY with Milling, Y Axis, Subspindle, Barfeed Interface, Chip Conveyor and Parts Catcher
2007 Mazak Nexus QTN 200-II MSY with Milling, Y Axis, Subspindle, Barfeed Interface, Chip Conveyor and Parts Catcher
$37,500 (USD)
Location:Michigan
or
Call (863) 439-6066
Description
Y Axis Capability (Off Center)
Subspindle with .001 Degree Index
Full C Axis Spindle Rotation
Live Milling / Drilling Capability
Collet Chuck on Main Spindle
6" 3 Jaw Hydraulic Chuck on Subspindle
Automatic Tool Eye
Chip Conveyor
Parts Catcher
Mill Spindle Synchronous Tapping
RS 232 Port Interface
3.5" Floppy Disk Drive Interface
Chuck Air Blast - Second Spindle
EIA/ISO Input Function for G Code Programming
Multi Tap Transformer
Coolant System with Tank & Pump
**There is NO TOOLING with this machine**
**MachIne has issues with spindle, subspindle, mill drive. See inspection report for full overview**
**LNS Hydrobar Barfeed and Mist Collector Available for Additional Cost**
Specifications
| Manufacturer | Mazak |
| Model | Nexus QTN 200-II MSY |
| Year | 2007 |
| Condition | Used |
| Stock Number | 119788 |
| Control | Mazatrol Matrix Nexus |
| Chuck Sizes | Collet on Main Spindle/6" Hyd on Subspindle |
| Maximum Swing/Over Carriage | 26.5" / 14" |
| Maximum Cutting Diameter | 14.75" |
| Maximum Cutting Length | 21.27" |
| X-Axis Travel | 9.055" |
| Y-Axis Travel | 4" (+/- 2.0") |
| Z-Axis Travel | 22.63" |
| C1 Axis Spindle Rotation/C2 Axis Spindle Rotation | .001 / .001 Degree |
| B-Axis Travel (Subspindle) | 23.0" |
| Spindle Nose / Spindle Bore / Bar Capacity | A2-6" / 3.0" / 2.0" |
| Spindle Speed / Sub Spindle Speed | 5,000 RPM / 6,000 RPM |
| Spindle Motor / Sub Spindle Motor | 35 HP / 15 HP |
| Rotary Tool Speed / Rotary Motor | 4,500 RPM / 7.5 HP |
| Number of Turret Positions | 12 Station Turret |
| Rapid Traverse Rates X, B / Z | 1181 IPM / 1299 IPM |
| Machine Dimensions | 107" x 74" x 73" |
| Machine Weight | 10,802 lbs. |