2011 Okuma MB-5000H
2011 Okuma MB-5000H
$99,950 (USD)
Location:Georgia
orCall (863) 439-6066
Description
2 Pallet Changer System
Full 4th Axis Rotary Table .001 Degree
Renishaw OMI-2 Tool Setter Probe
Renishaw OMP400MA Tool Part Probe
146 Station Tool Changer - Matrix Type
Coolant Thru the Spindle - 1,000 PSI
MP Systems Coolant Unit
15,000 RPM Spindle
Tool Breakage Detection
Coolant Filtration System
Chip Conveyor - Mayfran Concept 2000
Dual Chip Augers
Mist Collector
Expanded Capacity Coolant Tank
Rigid Tapping
Remote Jog Handle
3.5" Floppy Disk Interface
RS 232 Port Interface
All Available Manuals
**NC Running Time 28,176 hours**
**Spindle Run Time 19,413**
**Cutting Time 16,610**
**Coming out of aerospace facility. Same shop has a second 2016 unit equipped identically for $149,950**
Specifications
| Manufacturer | Okuma |
| Model | MB-5000H |
| Year | 2011 |
| Condition | Used |
| Stock Number | 119411 |
| Machine Control | Okuma OSP P-200M Control |
| Table Size / Number of Pallets | 19.7" x 19.7" / 2 Pallet Changer |
| Maximum Table Load | 1,100 lbs. |
| Pallet Indexing | .001 Degrees Full 4th |
| X-Axis Travel | 29.9" |
| Y-Axis Travel | 29.9" |
| Z-Axis Travel | 29.9" |
| Spindle Speed | 15,000 RPM |
| Spindle Taper | CAT 40 |
| Spindle Motor | 40 HP |
| Tool Magazine Capacity | 146 Station Tool Changer |
| Tool Change Time Tool to Tool | 1.1 Seconds |
| Rapid Traverse Rates | 2,362 IPM |
| Machine Dimensions LxWxH | 106" x 186" x 114" |
| Machine Weight | 27,800 lbs |