2007 Mazak Nexus QTN 100-II MS
2007 Mazak Nexus QTN 100-II MS
$93,500 (USD)
Oregon
orCall (863) 439-6066
Description
Subspindle
Full C Axis Spindle Rotation - Both Spindles
Live Milling / Drilling Capability
(2) Collet Chucks on Spindles
LNS Quickload Servo S3 Barfeeder Parts Catcher Automatic Tool Eye
(2) Foot Pedals 3-D Solid Modeling
Background Tool Path Check
Milling Spindle Synchronous Tapping
Automatic Chuck Jaws Open/Close
Chuck Air Blast Complete Coolant System w/ Tank & Pump
Memory Card Interface
Network Interface
3.5" Floppy Disk Drive Interface RS 232 Port Interface Multi Tap Transformer - Currently Wired 220V All Available Tooling
Miscellaneous Collets and Spindle Liners All Available Manuals
**Machine Hours Taken as of July 2023**
Power on: 34,229
Auto Operation: 18,198
Auto Cut: 17,781
Total Cut: 11,187
Total Time: 34,229
Specifications
| Manufacturer | Mazak |
| Model | Nexus QTN 100-II MS |
| Year | 2007 |
| Condition | Used |
| Stock Number | 118967 |
| Control | Mazatrol Matrix Nexus |
| Chuck Size | Collet Chuck / Collet Chuck |
| Maximum Swing | 21.6" |
| Maximum Cutting Diameter | 11" |
| Maximum Cutting Length | 12.1" |
| Maximum Bar Capacity | 1.625" |
| X-Axis Travel | 15.12" |
| Z-Axis Travel | 13" |
| Spindle Nose / Spindle Bore | A2-5" / 2.4" |
| Spindle Speeds | 6,000 RPM |
| Spindle Motor | 15 HP |
| Subspindle Speed | 6,000 RPM |
| Subspindle Motor | 10 HP |
| Live Tooling Speed / Live Tooling Motor | 4,500 RPM / 5 HP |
| Number of Turret Positions | 12 Station Turret |
| Rapid Traverse Rates X / Z | 1181 IPM / 1299 IPM |
| Machine Dimensions | 92" x 84" x 70" machine only |
| Machine Weight | 9,500 lbs. |