2021 Doosan DNM 5700S
No longer available
2021 Doosan DNM 5700S
$89,900 (USD)
Location:California
Description
Renishaw Part Probing
-Spindle Mounted Probe is NOT included
15,000 RPM Spindle - Big Plus
Chip Conveyor - LNS Turbo
Coolant Through the Spindle - 300 PSI
40 Station Side Mounted Tool Changer
Rigid Tapping
Remote Jog Handle
Flood Coolant System
Work Light
USB Port Interface
RS 232 Port Interface
Coolant System with Tank & Pump
Chiller Unit
Wired 220V Electrics
**Run Time Hours only 4,619**
**Cutting Time Hours only 3,569**
Specifications
| Manufacturer | Doosan |
| Model | DNM 5700S |
| Year | 2021 |
| Condition | Used |
| Stock Number | 118762 |
| Machine Control | Fanuc i Series Plus Control |
| Table size | 51.2" x 22.44" |
| Maximum Table Load | 1,300 lbs. |
| X-Axis Travel | 41.3" |
| Y-Axis Travel | 22.44" |
| Z-Axis Travel | 20.08" |
| Spindle Taper | CAT #40 Big Plus |
| Spindle Speeds | 15,000 RPM |
| Spindle Motor | 25 HP |
| Number of Tool Positions | 40 Station Side Mounted ATC |
| Tool Change Time Tool to Tool | 1.3 Seconds |
| Rapid Traverse Rates X, Y / Z | 1653 IPM / 1417 IPM |
| Cutting Feedrates | 590 IPM |
| Machine Dimensions | 122.4" x 95" x 117.5" |
| Machine Weight | 14,330 lbs. |