2006 Doosan Puma 700LM with C Axis & Milling, 32" 4 Jaw Man. Chk, 6.5" Bar Cap., 126" Turn Length, SMW Steady Rest, Tailstock, Conveyor
2006 Doosan Puma 700LM with C Axis & Milling, 32" 4 Jaw Man. Chk, 6.5" Bar Cap., 126" Turn Length, SMW Steady Rest, Tailstock, Conveyor
$189.500 (USD)
Ubicación:Texas
o
Llamar (863) 439-6066
Descripción
32" 4 Jaw Manual Chuck
6.5" Bar Capacity
SMW Autoblok Hydraulic Steady Rest
Tailstock
Chip Conveyor
Tool Presetter
High Pressure Coolant System
12 Station Bolt On Style Turret
Coolant System with Tank & Pump
RS 232 Port Interface
Card Interface
Wired 200/220V Electrics
All Available Manuals
All Available Tooling (NO Perishable Tooling is Included, Only Tool Holders)
Will Include Some Live Tool Holders
Especificaciones
| Fabricante | Doosan |
| Modelo | Puma 700LM |
| Año | 2006 |
| Condición | Usado |
| Número de Stock | #120860 |
| Machine Control | Fanuc Series 21i-TB Control |
| Chuck size | 32" 4 Jaw Manual Chuck |
| Maximum Swing over Bed | 40.6" |
| Maximum turning diameter | 31.5" |
| Maximum Distance Between Centers | 126" |
| Maximum Bar Capacity | 6.5" |
| X axis travel | 18.5" |
| Z axis travel | 133.8" |
| C Axis Spindle Rotation | .001 Degree |
| Spindle Nose / Spindle Bore / Bar Capacity | A1-15" / 7.12" / 6.5" |
| Spindle speed | 3 - 1500 RPM (3 Ranges) |
| Spindle motor (30 min / cont) | 60 / 50 HP |
| Rotary Tool Speed / Rotary Motor | 30 - 3,000 RPM / 15 HP |
| Turret type | 12 Position Bolt on Style Turret |
| Rapid traverse rates x, z | 472 IPM / 397 IPM |
| Tailstock Quill Diameter / Quill Travel / Taper | 6.3" / 5.9" / #5 MT |
| Machine dimensions | 290" x 104" x 102" (355" length with chip conveyor in place) |
| Machine weight | 48,400 lbs. |