2013 Mazak Nexus VCN 510C II with Prepped for Coolant Thru Spindle, 4th Axis Drive, Chip Conveyor, 30 Station ATC
2013 Mazak Nexus VCN 510C II with Prepped for Coolant Thru Spindle, 4th Axis Drive, Chip Conveyor, 30 Station ATC
$52.000 (USD)
Ubicación:Kentucky
o
Llamar (863) 439-6066
Descripción
4th Axis Ready
Quad Auger Chip Removal System
Chip Conveyor - External Belt Type
30 Station Side Mounted Tool Changer
Automatic Tool Length Measurement Probe
Remote Hand Held MPG
Coordinate Rotation & Scaling
Rigid Tapping
EIA/ISO Input Function
Mazzac2D Software G-61.1
PCMCIA Interface 2 Slots
USB Port Interface
3.5" Floppy Disk Drive Interface
RS-232 Port Interface
Multi Tap Transformer
Coolant System with Tank & Pump
Wired 208V Electrics
**Total Cutting Hours 4,232**
Especificaciones
| Fabricante | Mazak |
| Modelo | Nexus VCN 510C II |
| Año | 2013 |
| Condición | Usado |
| Número de Stock | #120853 |
| Control | Mazatrol Matrix Nexus |
| Table Size | 51.18" x 21.65" |
| Maximum Table Load | 2,646 lbs. |
| X-Axis Travel | 41.3" |
| Y-Axis Travel | 20" |
| Z-Axis Travel | 20" |
| Spindle Taper | CAT #40 |
| Spindle Speeds | 12,000 RPM |
| Spindle Motor | 25 HP |
| Distance Spindle Nose to Table Top | 5.9" - 25.98" |
| Number of Tool Positions | 30 Station Tool Changer - Side Mounted |
| Maximum Tool Diameter / Length / Weight | 4.92" / 13.8" / 17 lbs. |
| Tool Change Time Tool to Tool | 1.3 seconds |
| Rapid Traverse Rates | 1,417 IPM |
| Machine Dimensions | 113" x 111" x 113" |
| Machine Weight | 15,200 lbs. |