2012 Doosan Puma 400MB with C Axis, Milling Capable, 15" Hyd. Chk, 4.5" Bar Cap., 41.3" cc, Tailstock, Conveyor, Live Tooling
2012 Doosan Puma 400MB with C Axis, Milling Capable, 15" Hyd. Chk, 4.5" Bar Cap., 41.3" cc, Tailstock, Conveyor, Live Tooling
$109.500 (USD)
Ubicación:Florida
o
Llamar (863) 439-6066
Descripción
Full C Axis Spindle Rotation
Live Milling / Drilling Capability
Chip Conveyor
15" 3 Jaw Hydraulic Chuck
4.5" Bar Capacity
Tailstock
Tool Presetter
USB Port Interface
Card Interface
RS 232 Port Interface
Coolant System with Tank & Pump
Oil Skimmer
Boxed Way Construction on Slant Bed
Geared Headstock
Chuck and Tailstock Foot Pedals
Leveling Pads
All Available Tooling Includes (3) Live Tool Holders
All Available Manuals
Wired 200/220V Electrics
**Manufactured New in November 2012, Delivered New in 2013**
(Machine Time in Photo is Displayed in Minutes)
**Power On Hours 11,637**
**Operation Hours 4,119**
**Cutting Hours 2,808**
Especificaciones
| Fabricante | Doosan |
| Modelo | Puma 400MB |
| Año | 2012 |
| Condición | Usado |
| Número de Stock | #120818 |
| Control | Fanuc i Series Control |
| Chuck Size | 15" Hydraulic Chuck |
| Maximum Swing | 30.31" |
| Maximum Turning Diameter | 21.7" |
| Maximum Turning Length | 41.3" |
| Maximum Bar Capacity | 4.5" |
| X-Axis Travel | 14.3" |
| Z-Axis Travel | 43.5" |
| C Axis Spindle Rotation | .001 Degree |
| Spindle Nose / Spindle Bore | A2-11" / 5.2" |
| Spindle Speeds | 2 - 2,000 RPM |
| Spindle Motor | 50 HP - 2 Speed Gearbox |
| Rotary Tool Motor | 15 HP |
| Number of Turret Positions | 12 Position Turret |
| Rapid Traverse Rates X/Z | 630 IPM / 790 IPM |
| Tailstock Quill Diameter / Center | 4.7" / MT #6 |
| Tailstock Quill Travel | 4.7" |
| Machine Dimensions | 170" x 86" x 92" |
| Machine Weight | 24,550 lbs. |