2003 Hurco VM2 with 16 Pos. Side Mounted ATC, Remote Jog Handle, Rigid Tap, Floppy Drive, Ulti-Pockets, Extended Memory
2003 Hurco VM2 with 16 Pos. Side Mounted ATC, Remote Jog Handle, Rigid Tap, Floppy Drive, Ulti-Pockets, Extended Memory
$4.500 (USD)
Ubicación:Texas
o
Llamar (863) 439-6066
Descripción
Rigid Tapping
Remote Jog Handle
16 Position Side Mounted Dual Arm ATC
Conversational Programming
Ulti-Pockets
Ramp/Helical Entry
Graphics
Extended HDD
Extended Program Memory
Flood Coolant System w/ Tank & Pump
3.5" Floppy Disk Drive
RS 232 Port Interface
Work Light
Machine Status Lights
Wired 230V Electrics
Especificaciones
| Fabricante | Hurco |
| Modelo | VM2 |
| Año | 2003 |
| Condición | Usado |
| Número de Stock | #120811 |
| Control | Hurco Max Control |
| Table Size | 46" x 20" |
| Maximum Table Load | 1,200 lbs. |
| X-Axis Travel | 40" |
| Y-Axis Travel | 18" |
| Z-Axis Travel | 18" |
| Spindle Taper | CAT 40 |
| Spindle Speeds | 8,000 RPM |
| Spindle Motor | 20 HP |
| Spindle Torque | 75 ft./lbs. @ 1,450 RPM |
| Number of Tool Positions | 16 Station Side Mounted Tool Changer |
| Rapid Traverse Rates X, Y / Z | 945 IPM / 750 IPM |
| Machine Dimensions | 100" x 81" x 92" |
| Machine Weight | 9,000 lbs. |