1997 Daewoo Puma 250B with 12" Hyd. Chuck, Chip Conveyor, Tool Presetter, Tailstock, ONLY 7848 Cutting Hours
1997 Daewoo Puma 250B with 12" Hyd. Chuck, Chip Conveyor, Tool Presetter, Tailstock, ONLY 7848 Cutting Hours
$22.500 (USD)
Ubicación:California
o
Llamar (863) 439-6066
Descripción
12" 3 Jaw Hydraulic Chuck
Tool Presetter
Chip Conveyor
Hydraulic Tailstock
RS 232 Port Interface
Boxed Ways
Coolant Tank with Pump
All Available Static Tooling
All Available Manuals
Wired 220V Electrics
**ONLY 7,848 Cutting Hours**
Especificaciones
| Fabricante | Daewoo |
| Modelo | Puma 250B |
| Año | 1997 |
| Condición | Usado |
| Número de Stock | 120159 |
| Control | Fanuc 18T Control |
| Chuck Size | 12" 3 Jaw Hydraulic Chuck |
| Maximum Swing over Bed | 22.4" |
| Maximum Cutting Diameter | 147.5" |
| Maximum Machining Length | 27.2" |
| Maximum Bar Capacity | 3.03" |
| X-Axis Travel | 11.1" |
| Z-Axis Travel | 26.8" |
| Spindle Nose / Spindle Bore | A2-8" / 3.54" |
| Spindle Speeds - Main | 35 - 3,500 RPM |
| Spindle Motor - Main | 30 HP |
| Number of Turret Positions | 12 Station Turret |
| Rapid Traverse Rates | 1181 IPM |
| Tailstock Quill Diameter / Quill Travel / Taper | 3.9" / 3.9" / MT #5 |
| Machine Dimensions | 170" x 71" x 72" |
| Machine Weight | 12,000 lbs. |