2006 Doosan Puma MX2500ST 9 Axis Mill/Turn Center w/ Pendulum B Axis Head, Milling, Y Axis, Subspindle, Lower Turret
2006 Doosan Puma MX2500ST 9 Axis Mill/Turn Center w/ Pendulum B Axis Head, Milling, Y Axis, Subspindle, Lower Turret
$59.950 (USD)
Ubicación:Texas
o
Llamar (863) 439-6066
Descripción
9-Axis Capability
Pendulum Style B-Axis Head
Live Milling Capability on Upper Head
Y-Axis Capability on Upper Head
Sub Spindle
10" 3 Jaw Hydraulic Chuck on Main Spindle
8" 3 Jaw Hydraulic Chuck on Subspindle
40 Station Tool Changer Magazine
12 Station Lower Turret with All Locations Capable of Live
Automatic Tool Eye
Chip Conveyor
Parts Exit Conveyor System
Complete Coolant System with Tank & Pump
3 Color Machine Status Condition Lights
Card Interface
RS 232 Port Interface
All Available Manuals
All Available Tooling
**Run Time Hours Upper Turret 5,851**
**Run Time Hours Lower Turret 445**
Especificaciones
| Fabricante | Doosan |
| Modelo | Puma MX2500ST |
| Año | 2006 |
| Condición | Usado |
| Número de Stock | 119870 |
| Machine Control | Fanuc 18i-TB Control |
| Chuck Sizes Main / Subspindle | 10" 3 Jaw / 8" 3 Jaw |
| C-Axis Rotation | .001 Degrees Main & Subspindle |
| Maximum Swing | 29.5" |
| Maximum Swing over Bed | 29.5" |
| Maximum Turning Diameter | 9.84" |
| Maximum Turning Length | 40.2" |
| X-axis travel | 21.9" |
| Z-Axis Travel | 43.1" |
| Y-Axis Travel | 6.3" Head Travel |
| Spindle Nose / Bore / Bar Capacity | A2-8" / 2.99" / 2.6" |
| Main Spindle Speed / Sub Spindle Speed | 5,000 RPM / 5,000 RPM |
| Milling Spindle Speed | 10,000 RPM |
| Main Spindle Motor / Sub Spindle Motor | 35 HP / NA |
| Tool Magazine Capacity | 40 Position ATC |
| Lower Turret Tools Position | 12 Position Turret |
| Rapid Traverse Rates X, Y / Z | 1417 ipm, 1024 ipm / 1417 ipm |
| Machine Dimensions LxWxH | 178"x91"x102" |
| Machine Weight | 28,500 lbs |