ABL Technology

(863) 439 6066


2012 Mazak Integrex i-200ST Mazatrol Matrix 2

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:

Specifications

Chuck Size (2) 8" Hyd Chk
Maximum Swing 25.91"
Maximum Cutting Diameter 25.91"
X-Axis Travel - X1 / X2 24.21 / 9.05"
Y-Axis Travel 9.84"
Z-Axis Travel Z1 & Z2 62" / 54.65"
B-Axis Travel 30 Degree-210 Degree
Spindle Nose / Spindle Bore / Bar Cap. A2-6" / 2.99" / 2.5"
C-Axis Movement Main & Subspindle 0.0001 Degree
W Axis Movement (2nd spindle) 60.59"
Spindle Speed (Both) 5,000 RPM
Milling Spindle Speed 1,200 RPM
Tool Shank HSK-A63
Tool Capacity 36 atc
Lower Turret 9 Postions
Spindle motor (Main & Sub) 30 HP / 20 HP
Rotary Tool Spindle Speed 12,000 RPM
Rotary Tool Spindle HP 30 HP
Rapid Traverse Rates 1575 IPM
Magazine Capacity 36 Pos. Capto ATC
Maximum Tool Diameter/Length/Weight 3.54"/8.27"/11lbs.
Machine Dimensions 193"x110"x107"
Machine Weight 36,596 lbs
Machine Dimensions 118" x 96"

Equiped with

Twin Spindle Design
Y Axis Capable
Full C Axis Spindle Rotation - Both Spindles
Live Milling/Drilling Capability on B Axis Head
Pendulum Type B Axis Head - 240 Degrees
.0001 Degree Contouring on B Axis
(2) 8" 3 Jaw Hydraulic Chucks on Both Spindles
36 Station Tool Changer w/ HSK-A63
Chip Conveyor
Programmable Tool Eye Both Sides
Scale Feedback on X, Y, Z Axis'
User Macro 600 Pairs
Mazak Tapping/Boring Tornado (EIA/ISO)
3-D Coordinate Conversion
B Mazacc-2D Software (Shape Compensation)
Polar Cooridantes input (EIA)
EIA Dynamic Compensation 1
Shape Compensation for Rotary Axes
Ball Screw Coolers (X-Axis)
Coolant Thru Milling Head (Upper Turret)
Low hours

Condition

Very Good