2007 Doosan Puma 280 with Chip Conveyor, Fanuc Cntrl, 10" Chuck, 3" Bar Capcity, Tailstock
2007 Doosan Puma 280 with Chip Conveyor, Fanuc Cntrl, 10" Chuck, 3" Bar Capcity, Tailstock
Contáctenos para conocer el precio
Ubicación:Texas
o
Llamar (863) 439-6066
Descripción
10" 3 Jaw Hydraulic Chuck
Chip Conveyor
Tailstock w/ Live Center
Barfeed Interface
Card Slot Interface
RS 232 Port Interface
Boxed Ways
Coolant Tank with Pump
All Available Static Tooling
All Available Manuals
Wired 200-220V Electrics
**7057 Total Cutting Hours**
Especificaciones
| Fabricante | Doosan |
| Modelo | Puma 280 |
| Año | 2007 |
| Condición | Usado |
| Número de Stock | 120241 |
| Control | Fanuc 21i-TB Control |
| Chuck Size | 10" 3 Jaw Hydraulic Chuck |
| Maximum Swing over Bed | 24.8" |
| Maximum Cutting Diameter | 17.7" |
| Maximum Machining Length | 24.8" |
| Distance Between Centers | 27.8" |
| Maximum Bar Capacity | 3.03" |
| X-Axis Travel | 9.52" |
| Z-Axis Travel | 26.8" |
| Spindle Nose / Spindle Bore | A2-8" / 3.54" |
| Spindle Speeds - Main | 35 - 3,500 RPM |
| Spindle Motor - Main | 30 HP |
| Number of Turret Positions | 12 Station Turret |
| Rapid Traverse Rates | 1181 IPM |
| Tailstock Quill Diameter / Quill Travel / Taper | 3.1" / 4.7" / MT #4 |
| Machine Dimensions | 130" x 77" x 80" |
| Machine Weight | 10,400 lbs. |