1997 Mazak QT10 with 6" Hyd Chuck, Tool Presetter, Tailstock, Chip Conveyor, Parts Catcher, 12 Station Turret, Tplus Control
1997 Mazak QT10 with 6" Hyd Chuck, Tool Presetter, Tailstock, Chip Conveyor, Parts Catcher, 12 Station Turret, Tplus Control
$9.500 (USD)
Ubicación:Nueva York, NY
o
Llamar (863) 439-6066
Descripción
6" Kitagawa 3 Jaw Hydraulic Chuck
Automatic Parts Catcher
Chip Conveyor - (On/Off Switch Needs Repair)
Optional 12 Station Turret
Automatic Tool Eye
Tailstock
Coolant System with Tank & Pump
RS-232 Port Interface
All Available Manuals
All Available Tooling
Wired 230V Electrics
**Good Running Machine, Just Decommissioned in April 2025**
**Manufactured New in February of 1997**
Especificaciones
| Fabricante | Mazak |
| Modelo | QT10 |
| Año | 1997 |
| Condición | Usado |
| Número de Stock | 120037 |
| Control | Mazatrol T-Plus Control |
| Chuck Size | 6" 3-Jaw Hydraulic |
| Maximum Swing | 19.25" |
| Maximum Cutting Diameter | 6.3" |
| Maximum Machining Length | 11.2" |
| X-Axis Travel | 3.75" |
| Z-Axis Travel | 11.4" |
| Spindle Nose / Bore / Bar Capacity | A2-5" / 1.97" / 1.57" |
| Spindle Speeds | 60 - 6,000 RPM |
| Spindle Motor | 10 HP |
| Spindle Torque | 70 ft. lbs |
| Number of Turret Positions | 12 Position Turret |
| Rapid Traverse Rates X/Z | 1200 IPM / 1300 IPM |
| Tailstock Quill Diameter / Center | 2.17" / #4 MT |
| Tailstock Body Travel / Quill Travel | 12.8" / NA |
| Machine Dimensions LxWxH | 104" x 78" x 88" |
| Machine Weight | 5,720 lbs |