2003 Mazak Nexus VCN 510C II w/ 2 Pallet Changer, Coolant Through Spindle, Tool Probe, Part Probe Ready
2003 Mazak Nexus VCN 510C II w/ 2 Pallet Changer, Coolant Through Spindle, Tool Probe, Part Probe Ready
$19.950 (USD)
Ubicación:Florida
o
Llamar (863) 439-6066
Descripción
2-Pallet Changer System
Automatic Tool Length Measurement Probe
213 PSI Coolant Thru the Spindle
Renishaw Part Probe Ready
Chip Conveyor
30 Station Side Mounted Tool Changer
Remote Hand Held MPG
Workpiece Air Blast
Rigid Tapping
G-00 Slope Constant
Additional EIA Functions
Mazzac2D Software G-61.1
PCMCIA Interface 2 Slots
LAN Port Interface
USB Port Interface
3.5" Floppy Disk Drive Interface
RS-232 Port Interface
Multi Tap Transformer
**Machine is not under power and has a hard drive issue. Was running fine upwards of 6 month ago, but was not being used with pallet changer**
Especificaciones
| Fabricante | Mazak |
| Modelo | Nexus VCN 510C II w/2 Pallets |
| Año | 2003 |
| Condición | Usado |
| Número de Stock | 117740 |
| Control | Mazatrol Fusion 640T |
| Table Size | 51.18" x 21.65" |
| Maximum Table Load | 2,646 lbs. |
| X-Axis Travel | 41.3" |
| Y-Axis Travel | 20" |
| Z-Axis Travel | 20" |
| Spindle Taper | CAT #40 |
| Spindle Speeds | 12,000 RPM |
| Spindle Motor | 25 HP |
| Distance Spindle Nose to Table Top | 5.9" - 25.98" |
| Number of Tool Positions | 48 Station Tool Changer - Side Mounted |
| Maximum Tool Diameter / Length / Weight | 4.92" / 13.8" / 17 lbs. |
| Tool Change Time Tool to Tool | 1.3 seconds |
| Rapid Traverse Rates | 1,417 IPM |
| Machine Dimensions | 240"x144"x122" |
| Machine Weight | 20,700 lbs. |