ABL Technology

(863) 439 6066


2007 Daewoo MX 2500ST Fanuc 18iTB

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:

Specifications

Chuck Size (2) 12" Hyd.
Maximum Swing Over Bed 29.5"
Maximum Swing Over Saddle 23.6"
Max. Turning Diameter Main / Subspdl 21.7" / 8"
Maximum Cut Length 59.9"
X Axis Travel Upper / Lower 21.85" / 7.48"
Y Axis Travel 6.3"
Z Axis Travel Upper / Lower 43.1" / 44.9"
B Axis Pendulum Travel 120 Degr.
W Axis Subspindle n/a
Main Spindle Nose/Spindle Bore A2-8" / 3.89"
C Axis Rotation - .001 increment 360,000 Deg
Spindle Speed - Both Spindles 5,000 RPM
Spindle Motor HP - Main / Subspindle 35 HP / 25 HP
Subspindle Nose / Bore A2-6" / 2.99"
Rotary Tool Spindle Nose n/a
Rotary Tool Speed Upper / Lower Trt 10,000 /4000 RPM
Rotary Tool Motor Upper / Lower Trt. 20 / 7.5 HP
Bar Capacity Main Spindle / Subspindle 3.5" / 2.625"
Magazine Capacity 40 Pos. ATC
Number of Lower Positions 12 Pos. Trt.
Rapid Traverse Rates X, Z/Y/W 945/630/787 IPM
Machine Dimensions 180"x91"x100"
Machine Weight 28,000 lbs.

Equiped with

Chip Conveyor
Parts Catcher
Y Axis Control
B Axis Pendulum Head
Lower 12 Station Turret
Full C Axis on Main Spindle
Live Tooling Main & SubTurret
All Available Manuals/Tooling
(2) 12" Hydraulic Chucks
Automatic Tool Eye
40 Station Tool Changer
RS-232C Port for DNC Interface
3.5" Floppy Disk Drive
High Pressure Coolant
Rigid Tapping
ONLY 3500 Cut Hours

Condition

Very Good