ABL Technology

(863) 439 6066


1997 Mazak Dualturn 20 w/ GL100C Gantry Loader Mazatrol Tplus

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:

Specifications

Chuck Size (2) 8" Hyd. Chks.
Maximum Swing 12.6"
Standard Cutting Diameter 10"
Maximum Cutting Length 5.91"
Distance Between Spindle Faces 49.21"
X Axis Travel - Both Turrets 9.06" / 9.06"
Z Axis Travel - Both Turret 19.69" / 19.69"
Spindle Motor 30 min / Continuous 20 HP / 15 HP
Spindle Torque 246 ft./lbs.
Spindle Speed 35 - 5,000 RPM
Spindle Nose/Spindle Bore/Bar Capacity A2-6" / 2.4" / 2.0"
Type of Turrets (2) 12 Posit. Drums
Rapid Traverse X Axis / Z Axis 1200 / 1300 IPM
Max Cutting Feedrate X / Z Axis 197" / 197" IPM
Machine Dimensions (machine only) 142"x73"x81"
Machine Weight (machine only) 14,520 lbs.

Equiped with

GL100C Gantry Robot Loader
6 Pallet Pitch Feed Conveyor
D3 Loading Hand w/ A&B Jaws
Rear Exit Chip Conveyor
Auto. Top Doors Open/Close
Turret Air Blast (both)
Additional Cool. Nozzle (both)
Tool Life Monitoring (2) 8" Hydraulic Chucks
Twin Spindle Design
Twin Turret Design
Auto Power Off
Automatic Tool Eye (both)
Color Graphics Control
Chuck Air Blast (both)
Chuck Jaws Open/Close (both)

Condition

Very Good