ABL Technology

(863) 439 6066


2003 Okuma Ace Center MF-46VA OSP-E100M

Description

The Okuma Ace Center MF-46VA adopts a powerful double column structure together with an integral rotary 2-APC for high accuracy and high production in a compact footprint. Okuma’s Thermo-Friendly Concept is standard on this machine for unrivaled dimensional stability over long continuous runs.  The Okuma MF-46V is equipped with a high speed; high power 8,000 rpm spindle with a 15 hp VAC liquid cooled integral motor. This model incorporates a six-second rotary two pallet and a high-speed 20 position automatic tool changer and a 1,574 ipm rapid traverse, resulting in a powerful production capability.
 
As machines become more complex, there is more room for human error.  Okuma’s Collision Avoidance System (CAS) integrates 3D modeling of their machines, blanks and tooling with the power of the THINC-OSP Control to create a virtual machine. By running the real-time virtual application seconds ahead of the actual cutting, problems can be detected early and the machine stopped before a costly collision.
 
CAS generates the actual and exact shape of the materials milliseconds ahead of a cut to confirm that no interference take place.  Virtual Modeling requires exacting dimensions and definitions that only Okuma can deliver.
 
Chatter if fairly common in the world of CNC machining.  Okuma Machining Navi chooses and optimal speed(s) at which the machine can avoid chatter, thereby saving operator time and maximizing productivity.  Okuma invented Machining Navi, an optional function that uses the THINC-OSP control and sensors to monitor chatter.  If chatter is detected, the function then either recommends spindle speed changes or automatically makes the spindle speed adjustments.
 
Okuma’s Thermo-Friendly Concept combines control technology and machine design to both minimize the amount of heat generated and deal with the heat that cannot be eliminated. Coupled with extremely accurate thermal deformation compensation, the benefit is unrivaled dimensional stability over long, continuous runs.  You no longer waste time and money warming machines up, thus requiring manual adjustments for temperature changes.
 
The Okuma Ace Center MF-46VA with the OSP-E100M control is a very fast compact designed two pallet machining center that is equipped with multiple safety and friendly features to satisfy your production requirements.

Specifications

Table Size / Number of Pallets 29.95" x 18.12" / 2 Pallets
Table Load Capacity 880 lbs.
X-Axis Travel 30.05"
Y-Axis Travel 18.11"
Z-Axis Travel 18.11"
Spindle Taper CAT #40
Spindle Speeds 50 - 15,000 RPM
Spindle Motor 30 minutes/continuous 35 / 25 HP
Maximum Spindle Torque 147 ft./lbs.
Tool Magazine Capacity 32 Position ATC
Tool Change Time 2.4 seconds
Maximum Tool Diam./Length/Weight 5.98"/11.81/26.4 lbs.
Rapid Traverse Rates X, Y / Z 1574/1260 IPM
Maximum Cutting Feedrate 1260 IPM
Machine Dimensions 129" x 92"
Machine Weight 21,340 lbs.

Equiped with

Integrated 180 Degee 2 Pallet Changer
Chip Conveyor
15,000 RPM Spindle Option
High Pressure Coolant Thru the Spindle
Renishaw Probing
32 Position Side Mount Tool Changer
Hand Held Remote Jog Handle
Machine Status Condition Lights
RS-232 Port Interface
Rigid Tapping
3.5" Floppy Disk Drive Interface
Helical Interpolation
Multi Tap Transformer
Shower Coolant System
Stevens Engineering Tooling Plates
Smog Hog Air Mist Collector
Hydraulic Work Holding Package w/ Foot Pedal
New Spindle Chiller in late 2017
Just Over 4,000 Spindle Run Hours

Condition

Very Good

Price

Please call us for pricing on this machine at (863) 439-6066.

Please enter your email address below to login & get pricing information.
*RETURNING CUSTOMERS ONLY NEED ENTER EMAIL ADDRESS FOR PRICING*