ABL Technology

(863) 439 6066

2017 Haas VF6/40 with TR310 Trunnion Haas 32 BIT

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:


Table Size 64" x 28"
Table Load Capacity 4,000 lbs.
X-Axis Travel 64"
Y-Axis Travel 32"
Z-Axis Travel 30"
Spindle Taper CAT 40
Spindle Speed 0 - 10,000 RPM
Spindle Motor 20 HP
Spindle Torque 450 ft./lbs.
Transmission 2 Speed Geared
Spindle Nose to Table 12" - 42"
Tool Magazine Capacity - Side Mount 30+1 Position ATC
Max. Tool Diameter/Length/Weight 3.5"/16"/30 lbs.
Rapid Traverse Rates 600 IPM
Cutting Feedrates 500 IPM
Machine Dimensions 156"x123"x129"
Machine Weight 21,500 lbs.

Equiped with

Haas TRT 310 5th Axis Trunnion Table
4th Axis Drive & Wiring
5th Axis Drive & Wiring
Coolant Through the Spindle - 300 PSI
Haas Wireless Probing Package
10,000 RPM Spindle
30 + 1 Side Mount Tool Changer
Through the Tool Air Blast
Spindle Orientation
Coordinate Rotation & Scaling
User Definable Macros
1 GB Expanded Memory
Remote Jog Handle
Chip Auger Conveyor System
High Speed Machining with Look Ahead
Dynamic Work Offsets & Tool Center Point Cntl
VPS Editing
Compensation Tables
Rigid Tapping
Flood Coolant System w/ Tank & Pump
Auxilliary Coolant Filter System
Haas Coolant Oil Skimmer
Wireless Networking Interface
RS 232 Port Interface
All Available Manuals
Wired 195-260 Voltage
Power On Hours 7,706
Cycle Start Hours 2,555
Feed Cut Hours 2,143
New as equipped just under $210,000
Used almost exclusively on Aluminum


Very Good