ABL Technology

(863) 439 6066

2016 Hyundai-Wia L2100SY Fanuc I Series


Chuck Size Main / Sub Spindle 8" Hyd / 6" Hyd.
Maximum Swing Over Bed 21.7"
Maximum Turning Diameter 13.2"
Maximum Machining Length 17.8"
Maximum Bar Capacity Main 2.6"
X Axis Travel 8.3"
Y Axis Travel 3.9"
Z Axis Travel 22.8"
C Axis Indexing Main / Subspindle 0.001 Deg. / .001 Deg
B Axis Travel (2nd spindle) 19.7"
Spindle Nose/Spindle Bore A2-6"/3.07"
Spindle Speeds 500 - 4,500 RPM
Spindle Motor 30 min. / continuous 20 / 15 HP
Subspindle Nose/Bore/Bar Capacity A2-5"/2.1"/ 1.4"
Subspindle Speeds / Motor 6,000 RPM / 10 HP
Milling Tool Speeds / Motor HP 5,000 RPM / 5 HP
Live Tooling Style BMT 55P
Number of Turret Positions 12 Position Turret
Rapid Traverse Rates X / Z, B / Y 708 / 944 / 472 IPM
C Axis Rapid 100 RPM
Machine Dimensions 133" x 67" x 74"
Machine Weight 10,000 lbs.

Equiped with

Full C Axis on Main Spindle
Live Milling/Drilling Capability
Y Axis Capability
8" 3 Jaw Hydraulic Chuck on Main Spindle
6" 3 Jaw Hydraulic Chuck on Subspindle
Barfeed Interface
CNC Indexing & Feeding Technologies model V-65LE Short Magazine Barfeed
Automatic Parts Catcher
Parts Ejector for Subspindle
Manual Tool Presetter
High Pressure Coolant (6 bar)
Chip Conveyor
Spindle Load Meter
Work Counter B
Chuck Open/Close Confirmation
RS 232 Port Interface
Flash Drive Interface
8.4" Color LCD Monitor
Boxed Way Design
Belt Driven Spindle
Complete Coolant System w/ Tank & Pump
Front Door Interlock
Work Light
Operation Status Light
All Available Static Tooling
Approximately (8) Live Tool Holders Included
Miscellaneous Barfeed Spindle Liners
All Available Manuals
Hours as of 11/20/19 when last checked
Power On 6,342
Run Time 2,475
Cutting Time 1,354
Used little since
*Collet Chucks in pictures DO NOT go with the machine


Very Good


Please call us for pricing on this machine at (863) 439-6066.

Please enter your email address below to login & get pricing information.