ABL Technology

(863) 439 6066


2012 Doosan/Daewoo Puma MX2600ST Fanuc 31i-A5

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:

Specifications

Chuck Size 10" Hydraulic Chuck
Swing Over Bed 39.37"
Swing Over Cross Slide 27.56"
Maximum Cutting Diameter 29.92"
Maximum Machining Length 60.63"
Maximum Bar Capacity Left / Right 3.03" / 2.95"
X-Axis Travel 24.8"
Z-Axis Travel 62.4"
Y- Axis Travel 9.05"
B Axis Movement / B Axis Increment 240 Degrees (+/- 120) / 5 Deg.
C Axis Spindle Movement - Both Spndl .001 Degree
Spindle Nose / Spindle Bore / Bar Cap. A2-8" / 3.38" / 3.0"
Spindle Speed 4,000 RPM
Spindle Motor 35 HP
B Axis Speed / HP 12,000 RPM / 30 HP
Lower Turret Rotary Tool Speed 4,000 RPM
Turret Type 40 Station ATC - CAPTO-C6
Number Of Lower Turret Positions 12 Position Turret
Rapid Traverse Rates (X & Z / Y) 1417 IPM / 1024 IPM
Machine Dimensions LxWxH 202"x103"x119"
Machine Weight 34,171 lbs

Equiped with

Pendulum Style B Axis Head
Full C Axis Spindle Movement Both Spindles
Sub Turret with 12 Positions
Live Milling/Drilling Capability Upper & Lower
Y Axis Capability
Subspindle
LNS Steady Rest w/ Rotary Coupling
(2) 10" 3 Jaw Hydraulic Chucks
Chip Conveyor
Automatic Tool Presetter
40 Station Tool Changer
(2) Units Chip Blaster K-CHBL-D30-MX High Pressure Coolant
Renishaw Part Probe-Radio Wave
Parts Catcher
Refrigerated Temperature Control (both spdls)
Y & Z Axis Glass Scales
Rigid Tapping
Tool Breakage Detection
Tool Life Monitoring
RS 232 Port Inteface
3.5" Floppy Disk Interface
All Available Manuals
Miscellaneous Tooling
ONLY 1897 Running Hours
ONLY 103 Cutting Hours

Condition

Very Good