ABL Technology

(863) 439 6066


2010 Nakamura Tome Super NTM3 Fanuc 16iTB

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:

Specifications

Chuck Size (2) 8" 3-Jaw
Maximum Turning Diameter 7.48"
Max. Turning Length using Upper Turret 8.07"
Max. Turning Length using Lower Turret 25.2"
Bar Capacity (Left / Right) 2.6" / 2.05"
X Axis Travel X1/X2/X3 6.594" all
Y Axis Travel Y1, Y2 4.015" both
Z Axis Travel Z1,Z2/Z3 9.842"/9.842"/26.968"
B Axis Travel - Subspindle 29.921"
C Axis Movement - Both Spindles .001 Deg.
Spindle Nose Main / Subspindle A2-6" / A2-5"
Spindle Bore - Main / Subspindle 3.15" / 2.48"
Spindle Speed - Main / Subspindle 4,500 / 5,000 RPM
Spindle Motor - Main / Subspindle 20 / 15 HP
Live Tooling Speeds / Motor 6,000 RPM / 5 HP
Number of Turrets 3 Turrets
Number of Tool Positions (per turret) 24 Dodecagonal Drum Turret
Rapid Traverse Rates X Axis 630 IPM all
Rapid Traverse (Y-Axis) 235 IPM
Rapid Traverse Z 1575 IPM all
Machine Dimensions 144"x91"x82"
Machine Weight 26,400 lbs

Equiped with

Dual Spindles (facing each other)
(3) 24 Station Turrets - 2 upper / 1 lower
All 3 Turrets Capable of Live tooling
Y Axis Capability on both Upper Turrets
Workpiece Take Off Conveyor
Chip Conveyor
LNS Quick Load Servo S3 Bar Feeder
High Pressure Coolant
All Available Tooling
All Available Manuals
4,563 Cutting Hours

Condition

Good