ABL Technology

(863) 439 6066


2001 Tsugami TMA8-II Model C Tsugami Fanuc LH2

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:

Specifications

Chuck Size Main / Subspindle BZ65 Collet / BZ65Collet
Maximum Work Diameter 8.668"
Maximum Work Length 22.852"
Maximum Bar Capacity Main 2.56"(only 2" w/ current chk)
X Axis Travel 16.94"
Y Axis Travel 5.122"
Z Axis Travel 24.23" (15.76"+8.47")
B Axis Pendulum Travel -15 Deg - 195 Deg (210 Deg)
B Axis Pendulum Head .001 Degree Increment
C Axis Rotation - Both .001 Degree
Subspindle Travel 29.55"
Spindle Nose / Spindle Bore - main 190mm Flat Nose / 2.876"
Main Spindle Speed / Motor 5,000 RPM / 25 HP
Subspindle Speed / Motor 6,000 RPM / 10 HP
Milling Spindle Speed / Motor 10,000 RPM / 7.4 HP
Tool Changer Positions 60 Station ATC
Tool Shank Configuration KM 40
Tool Change Time - tool - tool .8 Seconds
Rapid Traverse Rates (X,Y/Z) 945 IPM / 1260 IPM
Machine Dimensions LxWxH 142"x84"x89"
Machine Weight 15,400 lbs.

Equiped with

Twin Spindle Design with facing spindles
Full C Axis Spindle Rotation - both spindles
Live Milling/Drilling Capabilty
Y Axis Capability for off center line work
B Axis Pendulum Style Head
Chip Conveyor
Parts Catcher
Tool Presetter
(2) BZ65 Microcentric Collet Chucks (2" bar)
8" & 6" 3 Jaw Chucks
Current Collet Chucks only Allow for 2" bar cap.
60 Station Tool Changer
RemCool Model 2400 Hi-Press. Coolant-350 PSI
10.4" LCD Monitor
X Axis Liner Scale
Rigid Tapping
RS 232 Port Interface
3.5" Floppy Disk Drive Interface
All Available Tooling
All Available Manuals
Spindle Liners
Spare Parts
75 to 100 Tool Holders
ONLY 6,120 Run Hours doing Medical Work

Condition

Very Good