ABL Technology

(863) 439 6066


2000 Doosan/Daewoo Puma 300C Fanuc 21iT

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:

Specifications

Chuck Size 12" 3-Jaw Hyd Chk
Swing Over Bed / Swing Over Saddle 23" / 14.5"
Maximum Turning Diameter 15.7"
Maximum Turning Length 25"
Maximum Bar Capacity 4"
X-Axis Travel 11.1"
Z-Axis Travel 26.8"
Spindle Nose / Spindle Bore A2-11" / 4.53"
Spindle Speed 2,800 RPM
Spindle Motor 35 HP
Number of Speeds 2 Speed Box
Turret Type 10 Position Turret
Rapid Traverse Rate (X/Z) 800 IPM / 945 IPM
Tailstock Quill Diameter / Travel 3.94" / 3.94"
Machine Floor Space 138" x 71"
Machine Weight 13,400 Lbs

Equiped with

12" 3 Jaw Kitagawa Hydraulic Chuck
Tailstock
Tool Presetter
Chip Conveyor
3.5" Floppy Disk Interface
RS 232 Port Interface
Mist Collector Unit (LNS Fox WS700)
Boxed Ways
Geared Headstock
All Available Tooling & Manuals
Used to cut 4130 and 4140 steel
13,331 Cut Hours

Condition

Good