ABL Technology

(863) 439 6066

1997 Mazak Slant Turn 60N/2000 Mazatrol T-Plus


The Slant Turn 60N bed is a single piece Meehanite Iron casting designed to provide solid support, and rigidity, to perform cuts right up to a maximum horse power. Constructed with a 45 degree slant, the Slant Turn 60N bed offers outstanding safety and convenient access to the work zone for the purpose of machine set up, tooling changeovers, work piece load/unload, reduced operator fatigue, and most importantly the elimination of chip build up which can lead to excessive heat distortion around the critical working members of the machine/system. Wide, precision machined, hardened and ground integral "Z" Axis ways provide excellent support for the cross slide unit. A separate set of ways are pro¬vided to support the Tailstock, and accessory work support equipment.
The Slant Turn 60N headstock is engineered to provide the (via a four (4) step hydraulic shift unit) constant torque and constant horsepower ranges, neces¬sary for optimal piece part production over a wide range of cutting condi¬tions. Spindle bore 7.1" A2 11 nose mount permits the utilization of a multitude of standard workholding systems, and/or medium to small sized bar stock cutting applications. Support for the spindle is achieved through the use of ultra precision, ta¬pered roller bearings, and our extremely rigid meehanite iron headstock casting. Power to the headstock unit is provided by a 60 H.P. (45 kw) one half hour duty rated, drip proof, blower ventilated, D.C. main drive motor and SCR.


Chuck Size 18" Hydraulic
Maximum Swing 36.02"
Swing Over Bed 26.79"
Max. Cutting Diam. Chuck/Shaft 28.75" / 26.5"
Maximum Cutting Length 78"
X-Axis Travel 25.39"
Z-Axis Travel 80.1"
Spindle Nose / Spindle Bore / Bar Cap. A2-11" / 7.1" / 4.625"
Spindle Speed 2 ~ 1,000 RPM
Number of Motor Speeds 4 Speeds
Spindle Motor 30 Min. / Cont. 60 HP / 40 HP
Number of Turret Positions 15 Positions
Turret Indexing Time 4.2 seconds
Rapid Traverse Rates 315 IPM / 394 IPM
Tailstock Quill Travel/Body Travel 6.3" / 70"
Machine Dimensions 320" x 158" x 116"
Machine Weight 35,200 lbs.

Equiped with

18" 3 Jaw Hydraulic Chuck
7.1" Bigger Bore Draw Tube has 4.625" Bar Capacity
Hydraulic Steady Rest
Programmable Tailstock
Chip Conveyor
Slant Bed, Boxed Ways
RS 232 Port Interface
All Available Tooling (considerable)
All Available Manuals
From Aerospace Plant
ONLY 8,616 Cutting Hours
Installed new in 1999
Used in Aerospace shop




Please call us for pricing on this machine at (863) 439-6066.

Please enter your email address below to login & get pricing information.