ABL Technology

(863) 439 6066


1987 Okuma LB-15 OSP-5000L w/ IGF Conversational

Not Available

We're sorry, but this machine is not available. You can, however, browse through other machines in the same categories below:

Specifications

Chuck Size 8" Hyd Chuck
Swing Over Bed 15.75"
Maximum Cutting Diameter 9.84"
Maximum Machining Length 19.69"
X-Axis Travel 6.89"
Z-Axis Travel 20.47"
Spindle Nose / Spindle Bore/Bar Capacity A2-6" / 2.4" / 2.12"
Spindle Speed 75 to 4,200 RPM
Spindle Motor 30 Min. / Cont. 15 HP / 10 HP
Number of Turret Positions 12 Position Turret
Rapid Traverse Rates 472 IPM
Cutting Feedrate .0001 to 40" IPM
Tailstock Quill Diameter / Center 4.72" / #5 MT
Machine Dimensions LxWxH 147" x 73" x 69"
Machine Weight 9,900 lbs

Equiped with

8" Kitagawa B-208 3 Jaw Hydraulic Chuck
Tailstock - Manual Type
IGF Conversational Programming
Foot Pedal for Chuck & Tailstock
RS 232 Port Interface
Coolant Tank with Pump
Transformer with 220/440V Range
Fanuc Drives
All Available Tooling and Manuals

Condition

Good